Replaces the seals and hardware on your 2" Bladex waste valve. Seals, bolts, and nuts included.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Adam: What's going on everybody Adam here with etrailer. Today we're going to be taking a look at the Valterra waste valve seal kit. So if you have a one and a half inch diameter valve for your gray water tank, we have the replacement seals and it comes with the hardware. So this is just going to be an easier fix than just replacing the whole entire valve. It's just going to stop your leaks from happening. So first things first, we need to remove our valve and to do that we're just going to need a three eights inch wrench and socket to loosen these up.So we had a little bit of an issue.
Another reason why we're kind of switching this out. All of our heads on our bolts snapped off. But what I'm going to do is go ahead, just take a little punch. You can take anything that's going to fit in that hole and just give it a good little tap and it's going to break loose real easy, ideally. Look at that.
Look at that. Oh yeah. So I'm going to do that for all of them and then we can go ahead and take this valve out.So when we're going to be replacing our seals, the nice thing about it is when we do get the seals, we don't have to drive these back in. Obviously these are completely unusable because they're all seized up and stuff. So I'm going to get those out later, but now the nice thing is our seals are bad, but we can replace them really easily and it does come with the hardware so we can replace both of them all in one go around, which is nice.
So all you really need to do is take the new seals, just put them in there. I mean, it's really, really that easy.And it's going to be the same exact thing for the front and the back and check that out. Pretty much done deal. So everything's really working fine. I didn't have any leakage or anything like that.
So I can just go ahead and use the new hardware to re-install this valve. So now with all of our new stuff, shouldn't have any leaks or anything like that. Line it all up. Oh yeah. And put our hardware through just how it was before, just new stuff. And what I like to do is put them all in, get them all lined up, and then I like to go through there and tighten them all down separately, but kind of going from one to the other. So meaning I'll put this nut on here, I'll kind of tighten it down almost to the bracket there, and then I'll do like a star pattern.So I'll tighten this one down, then this one down, then this one, then this one, that way we're not going to be putting that seal under any weird angle. It's not going to get smushed. It'll just help everything go nice and smooth. So with the new hardware, we are going to have to have a eight mill and a 10 mill, whichever kind of tools you need to get it done. I'm just using a wrench and a socket. But go ahead and I'm going to tighten one up, not all the way, and then tighten the one back here up in that star pattern. Kind of like the lug nuts on your truck, car, motor home.Now that everything is all secured down, the levers moving, there's a little bit more of a seal there, and we don't have any drippage coming out from underneath. So everything's nice and sealed up and now we're good. Well everyone, that just about does it for a look at the Valterra replacement seals for your inch and a half diameter gray water tank waste valve.
Average Customer Rating: 4.8 out of 5 stars (355 Customer Reviews)
Replaces the seals and hardware on your 2" Bladex waste valve. Seals, bolts, and nuts included.
Work great
The seals were easy to replace. And the valve works great. It opens and closes easy
All the parts you need to repair a 2" black water tank as long as the knife gate is not damaged!
Not your fault but had a bit of a struggle installing the items because of the way my valves are located. They fit and work well, so I'm Happy.
Product was excellent and the price was right
John W - 06/21/2018
Review from a similar Bladex in Accessories and Parts
Replacing a five year old slide that came with the camper. This is a better quality slide. Easy to install. Etrailer is always great to work with! Love their videos!
Craig - 04/17/2021Review from a similar Bladex in Accessories and Parts
The items were shipped right away and they were exactly what I ordered. I have not installed them yet, but I do not anticipate any problems as it looks like they have everything that I will need included.
Review from a similar Bladex in Accessories and Parts
The items were shipped right away and they were exactly what I ordered. I have not installed them yet, but I do not anticipate any problems as it looks like they have everything that I will need included.
Review from a similar Bladex in Accessories and Parts
Etrailer is the best. They are so good to work with and make sure that your completely satisfied with followup after purchase. They are the true model of good customer service. I wouldn't even think of ordering items I need from anywhere else. One very satisfied, long time customer.
Review from a similar Bladex in Accessories and Parts
A couple weeks ago I backed our travel trailer into a campsite and clipped a large rock with the waste tank drain system. The flange from the Y pipe was damaged so I needed to replace it and since the black tank valve may have been damaged, I decided to replace that as well. Etrailer had all the Valterra parts I needed and one important detail was that they were all identified with the Valterra part numbers eliminating any chance of miss-ordering a component. Everything went together easily and the waste drain system on our TT is good as new. Thanks Etrailer!
Review from a similar Bladex in Accessories and Parts
This item was out of stock for several weeks but etrailer stayed in touch with me and keep me informed of the status of the order on a regular basis. The item arrived last week and now I am ready for my next camping trip. I have ordered from etrailer in the past. Thier customer service and products are second to none.
Review from a similar Bladex in Accessories and Parts
Thanks for the email I don't have much to say about the product. It is static in the open position 90% of the time. I do appreciate how you at etrailer have kept me informed and asked questions, insuring that I am satisfied. You may be able to tell from the attached photos, we are using these as gate valve for a fume exhaust system. These are old photos. We have moved to a new facility, and the hoses are upgraded.
Review from a similar Bladex in Accessories and Parts
Great price and products. Could have been shipped quicker. Converting airstream thetford valve to vaulters. The combination I chose dropped the drain 2” below the belly. I’ll have to install a grey tank to tuck everything up in my 73 Sovereign 31’ center bath rv.
Review from a similar Bladex in Accessories and Parts
I still have install it but it is identical to the old one so I do not see any issues. As usual very satisfied with Etrailer!
Review from a similar Bladex in Accessories and Parts
Another quality part from etrailer fast service And the part fit perfectly install it within minutes of receiving it
Rick - 08/12/2018Review from a similar Bladex in Accessories and Parts
Solidly built, smoothly functioning replacement product. It took less than fifteen minutes to remove and replace the old valve.
Review from a similar Bladex in Accessories and Parts
Delivery was on time and installation was successful Old valves were leaking and i was tired of always having a bucket to catch the leak when i opened the 3 inch cap. 2 down one to go as the black tank valve is holding strong.
Review from a similar Bladex in Accessories and Parts
Had to use my handle, because it is long. Not the most pleasant job, but it does not leak down like my old one. A year later my sewer line is dry like it should be.
Scott B - 05/23/2021Review from a similar Bladex in Accessories and Parts
The Valterra waste water valves are well built and work effectively. The most important part of installation is to resist the temptation to over tighten them. Close the valve; place the rubber gasket in place and tighten the mounting hardware until just over hand tight. Test the valve for leaks. If there are any tighten each bolt/nut about 1/2 turn and try again. If still no joy, make sure the gasket is in place and try again. There is no need for excessive pressure on the valve structure to achieve a water tight seal.
Review from a similar Bladex in Accessories and Parts
Was an exact replacement for original equipment on our Lance. Very easy to switch out. Still working well.
Review from a similar Bladex in Accessories and Parts
Our 2019 Winnebago was built with a defective valve body and you can imagine what a problem that was, it leaked, not a lot but enough. I installed this new on on the black water side and what a difference, smooth operation and seals tight. As always etrailer delivers on time and great products. Everything always fits.
Review from a similar Bladex in Accessories and Parts
The whole process was amazing!! Got exactly what I needed in excellent timing. Exceeded my expectations!! Thank you so much! I will definitely be using etrailer again!
Review from a similar Bladex in Accessories and Parts
Great product fit was perfect but took 9 days to receive from the day I ordered it !!
Review from a similar Bladex in Accessories and Parts
Thanks for shipping in a small box that fits in a mailbox. Post office is a drive to town.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.