Valterra High Flow Water Regulator for RVs - Brass - Lead-Free

Ask the Experts about this Valterra RV Water Pressure Regulator

• Where Does the Water Regulator Get Installed On a Camper
  The Valterra High Flow Water Regulator part # A01-1122VP will need to be installed on the city water inlet, on the exterior of the camper. This would be the only location that could protect the plumbing inside your camper. That said, I recommend you go with the Valterra Water Regulator and Pressure Gauge part # A01-1124VP which has an easy to read gauge instead.
  view full answer...
• How Is Debris In Water Trapped By Water Regulator For RVs
  A water regulator like part # A01-1122VP has a small filter that catches most of the debris you may have in the water. I have attached a photo of the regulator that shows the small screen. After the water pressure is reduced you can use the filter like part # CAM40631 that will clean up the balance of debris like aluminum, bacteria, bad taste, cadmium, chlorine, fungus, heavy metals, hydrogen sulfide, iron, lead, mercury, mold, odor, cloudiness, and sediment.
  view full answer...
• Availability of Adjustable Water Pressure Regulator
  We do offer an adjustable water pressure regulator, part # A01-1117VP, that includes a gauge to display the outgoing water pressure. Output water pressure is adjustable from 0 to 160 psi. We also offer part # CAM40064, which although not adjustable, is equipped with a gauge to display relative pressure. If you keep this item operating in the yellow zone on the dial you will know your water pressure is below 40-psi. Please refer to the linked videos for more on these items.
  view full answer...
• Adjustable Water Pressure Recommendation for RV to Increase Water Pressure
  We do offer an adjustable water pressure regulator, part # A01-1117VP, that includes a gauge to display the outgoing water pressure. Output water pressure is adjustable from 0 to 160 psi. I'd recommend using this to incrementally increase your water pressure till you get it where you want without going overboard. Increasing the pressure slightly would not be a problem.
  view full answer...
• What is Recommended Max Water Pressure for a Rockwood Mini Lite 2109S
  The max water pressure that most Rv/trailers can handle is 55 psi. This isn't a hard and fast rule but it is a general rule of thumb since most of them use the same type of fittings. If you were to use the Valterra High Flow Water Regulator # A01-1122VP then you should be good to go as it regulates the incoming water pressure to 50-55 psi.
  view full answer...
• What Are the Differences Between the JR and Valterra Water Pressure Regulators
  The different water pressure regulators has to do with the construction of the material (brass/stainless steel), pressure range (40-50 psi/50-55 psi etc.), and additional features such as the inclusion of a gauge or built-in bend. I am not sure exactly what two products you are referring to as we offer several from each brand but they will both work to reduce the water pressure entering the trailer. I have attached a list of options for you. The difference in price has to do with the reasons...
  view full answer...
• RV Water Filter and Regulator
  Our water filters like # CAM40631 need to be used after the water goes through a regulator and is reduced to 60 psi or less. For a water regulator you can use # A01-1122VP which will keep the pressure at 50 to 55 psi.
  view full answer...
• What Could Cause RV Water Regulator to Lose Pressure Over Time
  It's possible the regulator has gone bad over time or has gotten clogged. More likely it's gotten clogged if the pressure has been greatly reduced. The Valterra brand is a solid brand though. I wouldn't think twice about ordering a new one like # A01-1122VP or a JR regulator like the # 37204-62425 that you referenced.
  view full answer...