Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, Steve here with etrailer.com. Thank you for joining me while we take a look at this custom-fit kit, which is gonna allow you to mount full Rhino-Rack 2500 series legs, which are sold separately to the vehicle of your naked roof. Now there's a picture above my left shoulder here of those 2500 series legs. They again, are sold separately. That kind of gives you an idea of what these attach to. Now zooming in here, this particular kit, I've got the part number thrown up there as well.
This kit is DK330, and you're gonna get this custom-fit, which is gonna include padded metal clamps to provide secure grip on your door jams. They do bolt onto those leg assemblies that I mentioned before that are sold separately and they tighten down for a nice secure fit. They do protect the door jamb from scratches, abrasions and they are powder-coated for a durability and rust-resistant. So again, nice powder coat, that's that rubber underneath there to protect the top of your car, you got two pads left and right and two other pads left and right. These are flexible rubber.
And again, they match the contour of your vehicle. According to the instructions that you get as well, one of these would be left-side, one would be right-side, so make sure you're checking all that out in the instructions, they are molded rubber and again, they do clip onto the bottom of the roof rack legs. You get the four clamps and four pads you see here. They do have a limited lifetime warranty. And again, these are a custom-fit.
So always check the instructions. But first, check the etrailer.com fit guide. So go to our website, in the center of the page, there's usually a yellow button, I believe where you can enter your year, make and model. And after that, you will then select the appropriate roof rack kit that you're looking for. So again, this is etrailer.com.
I'm Steven. Thank you for taking a look at our Rhino-Rack kit that fits your Rhino-Rack 2500 series roof rack legs for your naked roof. Have a good one.
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
Ratings & Reviews
Great product. It should hold both kay aks
Usual fast delivery. Getting ready for camping season.
Thx
Works well so far. No issues
Fast delivery however the rubber strips for the Rhino bars did not arrive.
Great fit and clear instructions. Easy install and perfect fit for my 2017 GMC Canyon.
Fit perfectly! Just follow instructions! Really fits tight and securely. Couldn’t be happier and looks great!
The product is good. It would be helpful if the gripping pads had more grip. The truck body does not provide a great mounting opportunity.
Once installed they seem sturdy and look good. One of the end caps was damaged in shipping but otherwise everything was good
Bought for Rhino Rack for my 2017 GM Canyon. Work great -- no issues. Easy on and off of racks on my truck.
The rack fit well and was easy to install. Seems to be made well. The problem is the amount of road noise. I never even put the basket on. It was so loud, it roared. I repositioned it several times but the noise was way too much and I finally just removed it. I spent a lot of money for the rack and the basket and now they are in storage. I wish it would have worked out better because I thought it looked really good.
Product Fit my 2018, Colorado, ZR2 perf ectly.
The Rhino-Rack has been great once I figured out the spacing of the supports. Unfortunately, the given spacing did not include the spacing I needed for my 2020 Chevy Colorado. It took some time to figure out the needed spacing before I installed them. Once the spacing is correct, they are easy to install and remove as they were easy to install the following year. I would recommend them to anyone needing a car/truck roof rack.
Looks like a very good product for my Chevy Colorado. Went on a shake down cruise with two kayaks and the rails performed very well with my Yakama kayak carriers. The only issue I had was having to adjust the post width by a centimeter or so from the printed recommendations in order to get the best fit with the rubber pads and the rooftop channels. This adjustment was also necessary to get the locking covers to close and lock. Looks like a great product I will use a lot. The quick shipping coordinated by Susan was greatly appreciated.
Great rack. Easy to install. Solid as a rock. I car/truck top various canoes on it and feel safe at highway speeds 80mph+.
Instructions are not very clear, otherwise once you figure it out the install is easy.
Fit great, this setup is great for going to a festival and car camping. Will hold a smittybilt RTT
Very happy with roof rack! It does the job and looks good.
Giovanni B.
7/17/2021
Top notch!!
As you can tell by the photo, they never came. Thank you [vendor] for having a tow hitch basket in stock. They saved the day as my other storage option did not arrive, even with the additional $$ paid for faster shipping.
The Rhino Rack products are top notch and more reasonably priced that "T" or "Y" brands. (I think some accessories may be interchangeable.) I've had both "T" and "Y" racks but I'm now totally sold on the Rhino brand.
Photo attached of four Rhino,Aero bars, towers and ARB awning mounted on my '18 Colorado and Alu-Cab canopy.
My ARB awning fits fine. And the crossbars come in real handy for our canoes and some pairs panel fencing we transported last summer.
As for the staff at etrailer? Well, I'd say they take fantastic care of their customers. Knowledgeable, helpful and they followup, as well.
Etrailer also has amazing HELP videos as well. I bent the crank handle on my trailer tongue jack, which messed up the "internals". I thought Ikd be shelling out for a new Jack, for sure.
Nope. etrailer had a repair kit available (apparently, I'm not the only destroyer of tongue jacks) at a very affordable price and they have an online video to instruct one in the replacement of the innards.
I don't bother with the other accessory or parts sources anymore. I just call these guys and ask what they have. Never have been disappointed, and they enjoy helping.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Katrina D.
10/16/2023
This is actually very common with square roof racks. I would recommend a fairing like part # RRRF4. This should help eliminate some of that noise. Please note, there will still be some noise, but not nearly as much. Let me know if you need assistance in ordering the fairing.