Video Transcript for Review of Meyer Snow Plow Parts - Meyer Plow Parts - ME96FR

Hi, everyone. Steven here with etrailer. Today we're looking at our two inch drop extension for your Meyer Home Plow and WingMan snowplows fitting a two inch hitch receiver. So folks, the two inch drop extension that we're looking at today, as you can see, has one, two, three hitch pin holes here on the backside and one single hitch pin hole down here after the two inch drop. Now these are all 5/8 eighth inch standard hitch pin hole diameters. I'm going to go ahead and pop that measurement there for you just so you can see that as well.

And these are again going to be needed when your vehicle's front Class 3 quick link hitch receiver is either too high or too low for your snow plow. With this attachment you can correctly ensure the measurement from the ground to the center line of that hitch is between 10 to 13 inches and that's per Meyers for those snow plows. Now again, this is a two inch receiver drop. If you need it four inch, we carry that separately, item number ME95FR. Again, if you need the four inch, that's item number ME95FR.

Let's go ahead and get some measurements overall from the front side here to the back side over here. I'm getting about 10-1/4 inches long. And from this hitch pin hole here to the front, I get right at about 2-1/2 inches to center. Now from the front here, I'm going to go center of each one of these holes. The first one looks to be 6-3/8.

The next one's right at eight and the next one is 9-3/8 on center on those to the front. So again, folks, heavy duty steel construction, a very, very nice powder coat finish. The shank is a solid two inch by two inch shank. And again, it gives you a two inch drop overall. Folks, that's going to wrap up our quick look together at this two inch drop extension for your Meyer Home Plow WingMan snow plows.

I'm Steven, thanks for watching.