Video Transcript for Hands-On with the B and B Projected Male Spigot Fitting for RV Waste Tank

Hello, neighbors. Steven here with etrailer.com. Today we're looking at our B&B Projected Male Spigot Fitting for your RV Waste Tanks that fit three inches. And as you can see, it's a black color. So folks, spigot fittings are used for setting up your RV's black water tank. Now the fitting diameter is determined by a pre-drilled hole or one that you drill yourself.

Your needs may vary when installing or replacing your tank. And this nice fitting here does require an ABS plastic solvent to weld it to your tank. And I'll put that item number on the screen there for you. We sell it here at etrailer.com separately. Now getting to the product itself, it's gonna resist road salt and chemicals.

It's a very heavy duty ABS plastic. And as far as the fittings, again, it's three inches interior there. Outside diameter here, I was getting right at three and a half. The widest point, so including this whole flange here, I was getting, and it's hard to see here without another straight edge, but I was getting four and a quarter inches. I was getting two inches deep overall.

And the inside, under the lip, I got about an inch and a half. And above the lip, the shorter side, I got right at three eighths of an inch. A nice one year warranty, folks. Again, a simple Projected Male Spigot Fitting for your RV Waste Tank by B&B. I'm Steven.

Thanks so much for watching, folks. Have a great day, and enjoy yourself.