See what our Experts say about this Tow Ready Trailer Hitch Ball Mount

• Recommended Towing And Roof Rack Components For A 2019 Hyundai Santa Fe
  Hi Linda, For a 2019 Hyundai Santa Fe you'll want the etrailer Trailer Hitch Receiver # e98843 for the hitch and the Tekonsha T-One Vehicle Wiring Harness # 118784 for the wiring. A 2" trailer hitch is definitely the way to go since most accessories are made for 2" hitches and if you had a 1-1/4" accessory you could just use an reducer sleeve. To mount the 4-pole connector to the trailer hitch crossmember you can use no-drill mount # 18140. You'll still need a ball mount to tow a trailer...
  view full answer...
• Using a Pintle Hook and Lunette Ring Assembly and Coupler and Trailer Hitch Ball
  I do have a solution that I think will work for you. If you can mount a Bulldog channel to the front of the trailer, # BDAC5000300, then you could use a coupler like # BDA200C0317, AND use lunette ring # 337B16137 when needed. We also have the pintle hook combo # TR63041 for a 2 inch ball, # TR63042 for a 2-5/16 inch ball to adapter the vehicle end of the set up.
  view full answer...
• Need Adapter to Mate Military Trailer With Standard 2-Inch Hitch Ball
  Often military trailers use a pintle or clevis type hitch. The link provided at right will take you to our main page for ball mounts where you can see both types. You can submit a photo to us to show your military trailer's hitch by responding to this email or by uploading your photos with a question. Please be sure to provide complete information on both the trailer and vehicle. For example, we offer mating pintle type parts # 63036 and # C48210.
  view full answer...
• What is Needed for a Pintle Hook for a Ford F-250 Super Duty to Tow a Trailer Level
  You will want a pintle hitch or any ball mount on a vehicle at the appropriate height to tow the trailer level. To do this you will need to park the vehicle and trailer on level ground and take some measurements. I have included a link to an FAQ article that will help. On a pintle hitch you would need to measure from the ground to opening on the hook part and on the ring measure from the ground to the bottom of the ring. Once you know the rise or drop you need what you can do is get an...
  view full answer...
• Distance from Hitch Pin Hole Center to Nearest End of Tow Ready Pintle Hook Combo Ball Mount
  I went out to the warehouse and pulled a Pintle Hook combo Ball Mount, # TR63041. From the center of the hitch pin hole to the back of the shank measures 2-9/16 inches. You would not want to cut off the end of it as that would compromise the structural integrity of the ball mount.
  view full answer...
• Class IV ball Mount and Ball Recommendations for a 2 Inch Trailer Hitch Receiver
  We have numerous ball mount styles and capacities that fit in a 2 inch trailer hitch, see link. For a Class IV with 16,000 pound capacity, the most popular options is # BWBMHD30010 if you are looking for a standard fix ball mount. For a ball you can use # A-90 for a 2 inch or # 19286 for a 2-5/16 inch. If you are looking for a pintle hook combo, you could use # TR63041. The ball capacity on this one is 7,000 pounds and the pintle capacity is 12,000 pounds. For the same set up but with...
  view full answer...
• Combo Ball Mount and Pintle Hook Combo Recommendation for a 2006 Ford F350.
  As long as the ball couplers of the trailers you plan on towing are designed for a 2 inch hitch ball the Pintle Hook Combo Ball Mount part # TR63041 should work well for you. If you need a 2-5/16 inch ball you would want the Pintle Hook Combo Ball Mount # TR63042 instead as this comes with a 2-5/16 inch ball. You will want to check the owners manual of your vehicle to determine what your towing capacities are and be sure not to exceed this figure with any of your trailers.
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?