Video Transcript for Let’s Check Out the Blazer LED Off-Road Light Bar

Hi everybody, Andy here with the etrailer.com and today we're going to take a look at this Blazer Off-Road LED Mix Beam Light Bar. This double row, LED, mix beam light bar is going to give you bright white light that's going to be great for off-road driving. The high quality light output actually comes from these two rows of 23 watt LEDs with an equivalence of 7,920 raw lumens and 4,190 effective lumens. Now I'm going to go ahead and connect this to my power source here just to go over some of the features that this light offers. This light has the ability to switch between spot, fog, or a combination beam for optimal visibility. So as I connect my power here, as you can see, our fog light came on first.

And then I'm going to go ahead and switch between. Now we're on our spot beam there. And then right now we have just moved over to our combination, both fog and spot. And so let me go ahead and turn my studio lights off here so you can see the light a little bit better, go for a wide view there. So this light is indeed very bright, it's very brilliant.

And with this combination beam on, let me go ahead and shine this on the wall behind me. The fog beam is going to project a beam pattern that's very wide horizontally, as you can see, and narrow vertically. So that's going to light up the road beneath the fog. And the spot beam is going to be great for seeing at a distance. This fog, spot light beam pattern is effective up to a distance of 984 feet.

So I'm going to go ahead and turn my studio lights back on here and disconnect the power so I'm not continuing to blind you. Let's take another close up look at this. I want to talk about this lens briefly. This is a tough polycarbonate lens that's IP67 rated to protect against dust and moisture and it's also impact resistant. And this features a really nice black powder coated aluminum housing.

And the brackets are also powder coated. And so this is going to be a very rugged light. This is going to be corrosion resistant. And the housing is actually designed to reduce wind noise when driving. Now this is going to be pretty easy installation with the included mounting hardware that you see here. And again, I have these brackets attached to the side of the body of this light just to kind of give you an idea of what this is going to look like. And let me go ahead and just walk through some overall dimensions with you so you can be confident that this is going to work for you. I took these measurements earlier, before our time together. So beginning with some overall measurements, from end of bracket to end of bracket, we're sitting right at about 23 and a half inches long. The overall height, we're sitting right at about three inches tall. And looking at just the light bar dimensions, not including the brackets, the length from end to end is about 21 and a quarter inches long. And then the light bar itself is about two and 5/8 inches tall. And then the overall depth, we're sitting right about one and 9/16 inches deep. This is going to hardwire into your 12 and 24 volt system and this has a six amperage draw. Instructions are included. Again, walk you through the simple installation process and go over the features of this light as well. And that's going to conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.