Video Transcript for In-Depth Review of the WeatherTech Mud Flaps-WT42MJ

Hello, neighbors, welcome back. I'm Steve with etrailer.com. Today we're taking a look at the WeatherTech MudFlaps. It's a no-drill installation, and they are digitally fit for the front and rear sets. Now this is a custom-fit set. It's gonna fit the 2020 to current GMC Sierra 3500 Dually trucks.

Make sure you double check that with our fit guide, etrailer.com. The top center of the page, enter your year, make, and model. Make sure you're getting the right part the first time please. Now again, like I said, there's no drilling, no tire removal. These are molded from a nice heavy-duty thermal plastic resin.

They've got all the screw holes here to mount and the attachment little molding here to mount. Now obviously these would be the duals, or the rear, and the other set would be the front. Now keep in mind one's driver, one's passenger. Just follow the included instructions when you get 'em to make sure you're installing 'em correctly. Now, like I said, installation's super easy.

You're also gonna get this T-Star bit and these two clips here. So these two clips are only used on the rear installation. So what you'll do here, you've already got some kind of plastic molding on the truck from the factory. You're gonna remove three screws from that plastic molding on your truck. You will save those screws.

You will put this in its place, reuse those three screws, tighten 'em loosely. And then up here at this top, that's where these clips are going that I showed you. Those pop into place, they help hold it in place. Once you've got the clip in, then you simply tighten the rest of those screws that you're reusing back down, and you're good to go. It's that simple, literally. And same thing on the front, except for the fronts, do not use the clips. So on the front there's just three factory screws. You pop them out, pop this guy into place, re-tighten those front screws that came from the factory, and then you're on your way, folks. It doesn't get any simpler than that. Really, it doesn't. So they are made in the USA, nice high quality product. They're gonna help protect your vehicle, your trailer, and that kind of stuff. And other motorists from dirt, debris, stuff that flies up and whatnot. And again, they are contoured digitally to fit your vehicle. So when they make these, they literally take like a 3D scan or a digital scan of where they're going, and they make it fit perfectly. So it's gonna have that clean factory look. It's gonna have that sleek design that we all like, right Well, folks, that's gonna do it again for our look at this set of front and rear dualies for the WeatherTech MudFlaps. I'm Steve with etrailer.com. Thank you so much for your time. Have fun installing, and have fun driving.