Replacement Power Unit for etrailer and Ram Hydraulic Trailer Jacks and Scissor Hoist Systems - 8 Qt

Video Transcript for Review of etrailer Replacement Power Unit - e25RV

Hi everyone, Steven here with etrailer.com. Let's take a look at the replacement power unit for the etrailer and RAM hydraulic trailer jacks and scissor hoist systems, specifically the 8-quart system. So folks, this will replace the power unit that's gonna hold the fluid and everything and house the motor, and of course, the remote for the etrailer or RAM hydraulic trailer jack or scissor hoist system. Now this powers both the jack up and down. The extension is 3,200 psi with the retraction of 1,500 psi. It does include the remote control with a 12 foot cord, and there's four pins.

Yep, four pins in this end that match up here with this end, or vice versa. And then this twist-on type to make that connection. And then, of course, you got your up and down buttons here. And the best part that I like, it's magnetic. So if you wanna stick it to the side of the motor or the side of the trailer even, it's gonna hold nice and strong on any kind of steel metal surface.

And of course, you got the reservoir here that you can fill up, and then you can empty it here if you need to. Now I went ahead and measured this before our time together here. I got, overall, 25-1/2 inches tall, and the reservoir is about 6-3/4 inches square. Again, this works with 12 volt DC RV/marine trailer batteries that are not included. This again is the replacement power unit for your etrailer and RAM hydraulic trailer jacks and scissor hoist systems.

I'm Steven. Have a good one.