Video Transcript for Feature Review Master Lock Gun Trigger Locks

Today, we'll be reviewing Part Number 90TRISPT. These are the Master Lock Gun Trigger Locks. They are keyed alike. Three locks are included as well as six keys. The standard trigger locks are going to help prevent accidental firing. They will fit most handguns, rifles, and shotguns. Keep in mind that they may not fit guns with integrated trigger guards made of molded plastic or composite material.

Theyre made from a durable steel construction, and the zinc bodies resist tampering. Here in the center, they do have rubber pads that line interiors of the locks to guard against scratching, so they are going to protect the finish. We'll go ahead and show you how these work. I'm only going to do the demonstration on one since they're all three the same. You would place the key in here and you would turn it clockwise. That's going to allow you to separate the two halves.

Your first step of installing this would be you would need to insert the key, turn the lock, separate the two halves. Insert the front lock unit, this is the section with the keyhole with the ratchet post, position through the trigger guard, and if you can install it behind the trigger, then that's going to give you the best security. Then you can insert the rear unit on there, and you want to make sure that the outside edges of both units are matching each other. Also, keep in mind that you may be able to achieve a more effective fit on some guns by positioning the lock differently. Since there's so many different makes and models and styles out there, you're just going to have to mess around with it and see what's going to best fit. These do come with instructions and they are very thorough and very helpful when it comes to installing this. After determining the best position, you just press the two units together.

You want to push them tight enough to where you make certain that the lock is tight and cannot be removed. It ratchets together. Again, it has the padded inside so its not going to cause any harm or damage to the trigger or the finish of the gun. Once that's in there, it's going to take up the whole trigger area, and its going to prevent the handgun, your rifle, or your shotgun from being able to be accidentally fired. It's very safe, very nice to have if you are a gun owner. That's going to do it for today's review of Part Number 90TRISPT.

These are the Master Lock Gun Trigger Locks. .