Video Transcript for Hands-On with the Indiana University Chrome Logo Emblem 2" Hitch Cover

Today, we're going to be taking a look at the Indiana University 2-inch hitch cover from AMG. This hitch cover is going to allow you to show your school pride. It's going to add a clean, finished look to your hitch, and it's going to help keep dirt and grime out of the receiver tube of your hitch. The hitch cover is made from a steel construction. It's going to feature a really nice black powder coat finish on it, which is going to do a great job at protecting it from rust and corrosion. Here on the front, we're going to have a chrome-plated metal emblem. The unit's going to feature a rustproof and fade-proof design.

It is American-made. Here on the back side, we're going to have a really nice foam gasket. That's really going to help reduce rattle between the hitch and the hitch cover. This is an officially licensed product. When installing this, it does require a hitch pin and clip or a hitch lock. Those items are sold separately.

If you need one, you can find them right here at etrailer.com. The pin holes on this hitch cover will accept a standard 5/8-inch diameter pin. We'll go over some measurements real quick. Starting with the overall width, we're looking at about 5 inches. Overall height, we're looking at about 3-1/2 inches. The distance that we have from the back of that foam pad to the center of the hitch pin hole is going to be pretty close to 2-1/2 inches.

This unit is designed for a 2-inch by 2-inch trailer hitch receiver. Very simple installation, just slide it into the receiver tube of your hitch, line up your pin holes, and secure it with the hitch pin and clip or hitch lock. That's going to do it for today's look at the Indiana University 2-inch hitch cover from AMG.