Video Transcript for Let’s Check Out the Arizona State University Chrome Mascot Emblem 2" Hitch Cover

Today we are going to be taking a look at the Arizona State university hedge cover from AMG. The hedge cover is going to allow you to show your school pride. It is going to add a clean finished look to your hedge, and it is going to help keep dirt and grime out of the receiver tip of your heads. The hedge cover is made from a steel construction. It is going to feature a really nice black powder coat finish on it, which is going to do a great job at resisting rusting corrosion. Here at the front, we are going to have chrome metal plated emblem. It is going to have a nice rust proof and fade proof design. The product is American made. Here at the back side, we are going to have a foam gasket.

It goes around the piece sizing of the hedge. That foam gasket is going to do a great job at reducing rattle in between the hedge and the hedge cover. This is an officially licensed product. It does require a hedge pin and clip or a hedge lock to get it fully installed. Those items are sold separately. If you need one you can find them right here, etrailer.com. The pin holes on the hedge cover will accept a standard 5 1/8 inch diameter pin.

A few measurements to go over with you real quick. The overall width here at the hedge cover face is going to be about 5 inches. Overall height is going to measure about 3 1/2 inches, and then the distance that we have, the back of the foam pad to the center of the hedge pin hole is going to be about 2 1/2 inches. This is designed for a 2 inch by 2 inch hedge. It is a very simple installation process, slide it into the receiver of your hedge. Line up your pin holes and secure with the hedge pin and clip the hedge lock. That is going to do it for today's look at the Arizona State university 2 inch hedge cover from AMG..