Fueling a car, mower, boat, or ATV from a fuel can is easier with this powered transfer pump. Lightweight and versatile, it makes the job safer, with less effort. Use the handle lever to control flow and the on/off switch to shut off the pump.
Features:
Specs:
Note: Not compatible with drinking water, acetone, benzene, cresol, ethyl, phenol, methyl ethyl, concentrated caustic soda liquid, nitric acid, hydrochloric acid, or sulfuric acid.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steven here with etrailer.com. Let's take a look at our DeWay Battery-Powered Fuel Transfer Pump for gas cans. It's a threaded application onto the top of your gas can with a 51-inch long manual hose trigger. So folks, again, that cap is gonna create that seal on top of your gas can. I'll throw an image up real quick of what this looks like installed on your basic kinda standard gas can.
This is compatible with kerosene, gasoline and diesel fuels. This cap has an integrated adapter, so it's gonna work with a couple different thread options that are out there, the two most common can types. So, it may not work on kerosene, specific jugs or cans. Just keep that in mind. The intake here is about 19 inches long.
It's got a nice narrow pump and everything in here that'll go down inside the can with ease. You have that housing unit here. You have a flip up top here with this button that's spring loaded for stop. You have your on power. When you close this, it's gonna automatically shut it off.
It does require the use of four AA batteries, not included. We do sell them separately, part number DU58QR if you're interested. Or if you have some at home, just use what you have. You have a nice spring loaded nozzle handle. It is manual.
You have an option here of pushing this over the top to keep it running. And you have a nice hanging tool here. You can either hang on this side or the opposite side, or you can actually just push this nozzle straight through like this if you need to. So, a couple different options as far as that goes. Once again, this transfer hose is an impressive 51 inches long. So with your gas can down here, you're gonna be able to reach many, many things, many different areas as needed. The flow rate's about 2.2 gallons per minute via that long discharge hose. And you're gonna get approximately a hundred gallons of pumped fuel transferred on a set of four new AA batteries. Well folks, that is gonna wrap it up for our quick look together. I'm Steven. Thanks so much for your time. I hope this information's been helpful for you. As always, stay safe while you're towing.
Practical design, easy to use.
works well
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.