Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy-duty ball coupler is designed to bolt directly onto your trailer. eZ-Latch ensures fast, easy, secure hookup and disconnect. Primed steel is sturdy and durable. 3/4" Diameter mounting bolts not included.
Features:
Specs:
This coupler features a simple-to-use latching mechanism known as the eZ-Latch. With this mechanism, hooking up is as easy as dropping the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly lined up with the ball when you lower it, and the rest is automatic. Disengaging the coupler is just as effortless. Simply lift up the handle and the coupler socket will automatically release its grip on the ball.
The contoured, low-profile design of the latch handle helps protect the coupler from damage by allowing any potential hazards - from debris on the road to your ball mount backing into the coupler - to simply slide over the top. This helps prevent anything from getting under the latch handle and releasing the ball, and it can also limit any damage to the coupler should an impact occur
Unlike most couplers, which have a pin hole on the handle latch, the eZ-Latch coupler features a hole on the side of the coupler itself. Inserting a coupler lock through this hole will keep the latch from lifting, preventing disconnect and theft.
Made of sturdy steel, this coupler features a durable red powder coat primed paint that is designed to limit rust and corrosion. This finish has a 500-hour salt spray rating, making the coupler perfect for marine use.
The eZ-Latch's sleek, ergonomically designed handle is constructed of an impact-resistant polymer-nylon-resin compound that provides the flexibility and strength needed to bounce back from a collision. The handle is corrosion-proof, allowing it to withstand whatever the road and the elements dish out.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today, we take a look at this Demco Easy Latch Flat Plate Mount trailer coupler for a 2 5/16" diameter ball. Has a 21,000 pound weight capacity, and it comes in this nice prime paint finish. Now, this is a heavy duty ball coupler. Just to let you hook up your trailer to your tow vehicle.
Right here it provides the connection point for your 2 5/16" diameter hitch ball, so it's ideal for utility, livestock, cargo, and construction trailers. What's nice on this one, it uses that easy latch mechanism right here, which is a corrosion-proof composite latch handle. It ensures a nice, simple, secure hookup and disconnect. And, what's nice about it, is it's an easy latch, so it'll let you hook up, when the latch is in the closed position, like it is now. All you do is just have to drop the coupler over the hitch ball, and the latch will snap into the place.
I wanna demonstrate that. I happen to pull a 2 5/16" diameter hitch ball, right there, so you can see putting it over there, drop it into place. You notice the latch automatically connects, and you're hooked up all ready to go. And then, when you're ready to disconnect, just lift up on the latch, and it comes right off. So, pretty simple to attach.
Just set it on the ball and push it down, and it connects just like that. Also, it's nice if you notice, a lot of your couplers will have the trigger latch, where they sit up real tall, they could get damaged. This one is a nice sleek, low profile design, so it'll allow any type of hazard that might slip over the top of it, from damaging the latch components. They'll just slide right over. Now, also, unlike most couplers that have the pinhole on that tall handle latch, this easy latch coupler will feature its 5/16" diameter hole on this side, and it goes through all the way to the other side.
And, that's for the coupler lock. You can put a coupler lock through there. This will keep the latch from lifting, preventing disconnect and theft. Now, the coupler locks, we do sell separately on our website. The diameter we mentioned of the pinhole is 5/16ths of an inch, and you just wanna make sure to get a lock that has a minimum span of three inches. Now, this is a nice sturdy steel construction. You can see it does have a nice powder coat prime paint finish on it to give you excellent corrosion resistant. Meets a 500 hour salt spray rating. So, it is great for marine applications. If you notice the flat plate mount design, it is a bolt on installation. This plate is six inches by six inches, and it'll bolt directly to the trailer, using the 3/4" grade five hardware. Now, the mounting hardware is not included. You would have to supply that. We mentioned the bolt hole diameter, you can see, is 3/4", and the bolt pattern, if we measure the distance center to center, horizontally is 4 1/2" and vertically is 4 1/2". Again, the ball size this will fit onto is a 2 5/16" diameter ball, and the weight capacity again is 21,000 pounds. But, that should do it for the review on the Demco Easy Latch Flat Plate Mount Trailer Coupler, for the 2 5/16" diameter ball, with a 21,000 pound weight capacity..
Average Customer Rating: 4.9 out of 5 stars (150 Customer Reviews)
Heavy-duty ball coupler is designed to bolt directly onto your trailer. eZ-Latch ensures fast, easy, secure hookup and disconnect. Primed steel is sturdy and durable. 3/4" Diameter mounting bolts not included.Works better than what the trailer came with. Works great!!
Have used this coupler for the past year. Works great. Spring loaded onto ball. Never second guessing. Would recommend.
Dave
3/5/2024
Have had this on for 2 years in ontario. Spring loaded latch still works like the day I got it. It is the best coupler i have ever found for trailers. Plus best weight rating !
Product fit perfectly. To be determined how well the plastic latching handle holds up
Easy install, bolted right up to my mount. I was originally skeptical about the plastic lever but I have had zero issues with this unit. I use the trailer regularly on a logging farm. Very pleased with the unit.
Best coupler on the market !
like i said was a little disappointed that I did not get the pin to keep it closed ! should have a option to buy one when you order it ! other than that PERFECT ! thanks jim
James
4/29/2023
best coupler ever easiest to know if it is locked or unlocked ! there is only one problem ! there is no place to store your lock pin if you had a place on the unit to store your pin that would be awesome! I understand that you dont have to have the lach up to hook it up but I like the lever up when I hook it up ! but still the best on the market I have replaced 3 of them from some other hard to use couplers
Great coupler
It came 1 day early and that was great! No problem at all!
Excited to get this mounted to the trailer (24' Stacker). Quick shipping and great customer service from etrailer!
Excellent product. The self latching is a dream.! And the best part was the customer service. Easy, fast and constant communication.
Product was awesome. Great new design.
Good quality! Works as expected.
Great service and great order communica tion!
fast delivery and good follow ups.
Thanks HD
This is a great company everything we have ever purchased from here has been well built and always very durable!!! Thanks for great products and wonderful customer service!!!
Tom
7/9/2023
I love it. It’s that simple
Do you have a question about this Flat Mount Trailer Coupler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ron
3/11/2024
It is still working just fine. Will buy again if it ever wears out.