Keep your 12V system charged and ready without adding another maintenance task. This 15-amp, 3-bank onboard marine battery charger delivers controlled multi-stage charging and long-term battery care, so you're not troubleshooting before launch.
When one battery bank is drawn down more than the others, fixed-output chargers can leave the system uneven and harder to trust. Distributed-On-Demand technology automatically senses demand and directs available charging amps to any one bank or across multiple banks as needed. On a 3-bank system, charging stays focused where it's needed, so you're not second-guessing which battery is going to lag behind.
Batteries that sit without proper maintenance lose capacity, and that usually shows up when you're expecting everything to be ready. This unit cycles through Charge, Condition, Auto Maintain, and Recondition stages to keep batteries at proper levels between trips. After 21 days in maintain mode, it automatically de-sulfates to restore lost capacity, so you can leave it connected and come back to batteries that are ready to work.
Multi-bank systems are only as reliable as the charging profile behind them. This charger includes 12 selectable profiles and supports Flooded, AGM, GEL, Lithium (LiFePO4), and Calcium batteries with custom settings available. Matching the correct profile keeps charging behavior consistent across the system, so you're not dealing with uneven performance between banks.
Not every dock or marina delivers consistent power. This unit includes selectable power levels that let you reduce AC input to 100%, 75%, 50%, or 25%. That keeps charging stable in low-power situations without overloading circuits, so you're not managing breakers just to keep batteries charged.
Charging issues are easier to catch when you can see what's happening in real time. The digital information center displays system voltage and amperage, while built-in fault indicators alert you to wiring issues or adverse conditions. You can quickly confirm output and spot problems before they turn into dead batteries.
Charging shouldn't depend on having perfect power conditions. This unit uses 100-240 VAC input at 50-60 Hz with power factor correction and auto-ranging input, so it works across a wide range of shore power setups. That keeps charging simple whether you're at home, at the dock, or traveling between locations.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steve here with etrailer. Let's take a look at the ProMariner ProNautic 1215P battery charger. So folks, if you've been dealing with multiple batteries on your boat, you know the last thing you like doing is spending time managing different chargers instead of getting right on the water. So the ProNautic 1215P is built to make your life easier. It's gonna make battery charging simple and automatic. So this is a 12-volt, 15-amp, three-bank onboard marine battery charger.
There's where you would plug in your batteries, and then you do have the LED screen here with the different lights and everything. And as you can see if you're reading this, this can do pretty much any battery out there. It's gonna automatically detect those, great Patrol motor batteries, Crank batteries, house accessory batteries. And once you permanently mount this on board, it's as simple as plugging it in after your trip on the water. Charges automatically under the rest while you sleep.
So it's an awesome piece of equipment. It has smart digital charging technology that I just mentioned already is gonna detect those batteries, but it's also been built for marine environment. So the waves, the moisture, the heat changes and all those kind of things, none of that is gonna mess with this or hurt it. And you got a little connection here on the side for data communication. You also have an optional cable here.
You can purchase separately a little bitty screen that you could also use if you wanna like route it out of the compartment and put it somewhere else versus having the onboard screen. That's totally up to you. And this is actually pretty compact, as I mentioned, 8-1/2" wide, 10-1/4" tall, and about 3-1/2" thick or deep depending on how you're looking at it. It just really is an awesome piece of equipment. Again, we have these in multiple different volts and different options as well, so if this isn't the exact setup you're looking for, reach out to us.
If you can't find it, we're more than happy to help you in any way we can. Folks, that's gonna wrap up our quick look together at this ProMariner ProNautic 1215P battery charger. I'm Steve with etrailer, thanks for watching.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.