To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your Toyota Highlander with this custom harness. T-connector plugs directly into OEM tow package wiring harness - no cutting or splicing required.
Features:
This custom-fit T-connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper on the driver's side.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Hopkins Plug-In Simple Vehicle Wiring Harness with the 4-Pole Flat Trailer Connector. This product fits certain years of the Lexus LX 470 and the RX 300, as well as the Toyota Highlander. You can use the vehicle fit guide located at etrailer.com to see if this is a fit for your vehicle. It's going to provide a 4-way flat connector at the back of your vehicle to power your trailer's signal lights. This harness is designed for use with the factory tow package. The 4-way flat connector is compatible with 5-pole, 6-pole, and 7-pole adapters.
If you're in need of one of those, they are sold separately, and available here at etrailer.com. Yeah, it's going to come with a dust cap for the 4-way flat connector. That way you can always coverup the connection points when your plug's not being used. Now this unit's designed to connect quickly and easily. All you got to do is locate the connection point behind the rear bumper and plugin your connector. This is custom fit, so it's going to match up perfectly with the plug on the vehicle.
It's going to snap lock together for a nice, tight, secure connection. Then you can secure any excess or slack in the wiring with the included cable ties. What's your instillation is complete, the 4-way connector is going to be stowed beneath the vehicle near the trailer hitch. We do recommend using a mounting bracket to keep the connector secure. Mounting brackets are sold separately. It's recommended that you use a small amount of terminal grease on all your electrical connections, like the vehicle and the 4-pole connector itself.
This grease is designed to help prevent corrosion to the terminals, and it is included with the kit. That's going to do it for today's look at the Hopkins Plug-In Simple Vehicle Wiring Harness with the 4-Pole Flat Trailer Connector.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.