To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
A camper that shifts around makes for a stressful drive, especially over long distances or in crosswinds. These frame-mounted tie-downs keep your camper locked to the most solid part of your truck—the frame—so the weight sits lower and stays balanced. That even weight distribution helps your truck handle naturally, even with a heavy camper onboard. No sway, no bounce, just a steady, confident ride mile after mile.
No one wants bulky parts hanging off their truck between trips. The removable arms on these tie-downs slide out when you’re not using them, leaving the brackets tucked neatly under the vehicle. With the arms off, they’re nearly invisible, so your truck keeps its clean factory look until it’s time to load up again.

Getting these mounted is simple because they bolt right into existing holes in the frame. There’s little to no drilling, no cutting, and no need for modifications. The tight fit keeps your ground clearance almost unchanged, so you don’t have to worry about snagging or dragging off-road or over uneven terrain.
These tie-downs are made of black powder-coated steel for corrosion resistance and long-term strength. The heavy-duty build means you can count on them through rough roads and harsh weather without worrying about rust or weakened mounts.
Every setup is a little different, so these tie-downs give you two anchor holes to fine-tune your angle and reach. You can extend the arms to clear fenders or sidewalls and line up your turnbuckles (sold separately) at the right tension. A solid angle between anchors keeps your camper steady from every direction when you’re on the move.


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a look at these TorkLift Custom Frame-Mounted Front Camper Tie-Downs. Now, these tie-downs are gonna give you attachment points at the front of the bed of your truck for securing a bed-mounted camper. Turn buckles are required to attach your camper to these tie-downs, so if you don't already have the turn buckles that you need, you can find them here at etrailer.com. Now, these have been designed to fit your 2020 and newer Jeep Gladiator with a factory hitch, and on custom-fit parts such as these tie-downs, I do recommend taking advantage of our Vehicle Fit Guide. Simply input the year, make, and model of your vehicle and answer any other questions that the Fit Guide might have for you, and it will confirm if these will work for you or if we have something comparable that will work for you.
So, again, these are the front tie-downs. If you're also looking for the rear tie-downs, just do the same thing and go through the Fit Guide and it will find the rear ones that will work for this particular fit. Now, one other thing I wanted to mention is if you have a plastic or spray-in bed liner, it is important that you use a rubber mat underneath your camper to eliminate any sliding or bouncing. Now, the frame-mounted design is going to ensure excellent handling because securing your camper to your truck's base instead of its bed is going to better distribute the weight to keep your setup from being too top heavy. These brackets are gonna fit tight to the frame of your truck.
You're not gonna have to worry about losing any ground clearance. They are going to use preexisting holes in the frame, so there's really gonna be little to no drilling required for installation. These steel tie-down inserts are going to secure to these durable steel brackets with the included bail pins that you see here, and these inserts can be easily removed from the frame-mounted brackets, so when you have the inserts removed, you're really not even gonna be able to see these brackets for these tie-downs. You can take these inserts, maybe throw 'em into the back of the cab of your truck, and then when you need them, you retrieve them, slide 'em into the brackets, secure it with the bail pin, and you'll be good to go. Now, these do feature a high-impact powder coat finish.
It's gonna give you an extra layer protection on the inserts and on the brackets, and you're gonna get everything that you see here on my table. You're gonna get two front tie-down inserts, two frame brackets, the necessary hardware, and instructions to guide you through the installation process. This does have a lifetime warranty from TorkLift. I think that's gonna wrap up our look today. I do hope that it was helpful for you.
Again, my name is Andy, thank you for joining me.
Ratings & Reviews

Mark
6/6/2025
These tie downs are sill working as advertised. I have travelled over 20,000 mi with them in various conditions with about 10 of that time in dirt roads or 4wd roads. Nothing too crazy, but with my camper and these tied downs I am confident that the camper will remain attached and be secure. It hardly moves around at all. They are worth the money and I can still remember how easily they installedvery welll thought out design and installation!


Heather A.
5/1/2026
Hi Jim! I can see why that would be frustrating for sure. The good news is you usually don’t have to do anything drasticmost fixes come down to slightly repositioning the exhaust system rather than fully relocating it. That can mean loosening and adjusting a bolt-on hanger, adding a small spacer, or even tweaking the hanger position just enough to create some clearance. I’ll drop this article here since it walks through a few simple ways to fix it step-by-step, but overall you’re on the right track it’s typically just a matter of giving the exhaust a little more room so nothing is rubbing or under tension. This help article is about a hitch install but it still applies here.
Helpful Links

Jenny N.
12/5/2022
I reached out to the manufacturer. They advised that they think it is a combination of the Northern light camper anchor point location being situated so far back on the camper and possibly the front of the camper not being all the way against the bulkhead of the bed if it is moving forward still. Otherwise, everything looks typical of a truck camper and truck installation. If it has any room to slide forward, it will in a sudden braking situation.

Albert
12/6/2022
Jenny thanks for your reply and diligence in reaching out to TorkFit. The NL camper does have forward bumpers for abutting the bulkhead. However when bulkhead contact is made the body of the my 21 Silverado makes contact with the fiberglass body of the camper. The pressure from a recent ‘sudden stop’ and ‘slide forward’ created enough pressure to chip paint on the truck. The bumpers make contact with the bulkhead about 10”-12” above the bed-bulkhead connection. The 90* corner at bottom, this should be the strongest area. I will install stop chocks at future loadings. I’ll also attempt to possibly install the TorkFits in a more vertical position. Thanks.

Lazer S.
12/30/2025
Glad to hear you are liking them, Milton! And I agree, the TorkLift tie downs are superior to the HappiJac tie downs. They are just more secure and heavier duty. At least in my opinion. And that sounds like quite the trip! Was it just a camping trip or did you do some fishing and or hunting?

Charles F.
5/24/2021
A year later and I couldnt be happier! I stand with my previous review 100

Dot
7/16/2023
A year later, I just got back from camping trip. I love the easy set up of these hitches. I’m a 65 year old woman, and I can put these mounts on my truck in less than five minutes. Then, another 10 or 15 to put the chains and turn buckles on, make them tight. I usually drive about 5 miles maybe 10, go get gas, and give all the chains a shake to make sure they’re still tight. If not, spin the turnbuckles a time or Two. And off, I go. I am extremely happy with this investment. Of all the things I bought after buying the camper, this has brought me the most security and feeling of safety. Good luck, happy camping whatever you decide.

Reed
4/12/2024
This is a very superior product. It was easy to install and is very functional and looks great. I highly recommend this product. Very well made and designed.


Scott
12/1/2025
It was an easy install, and they have worked with out flaw. I would recommend torque lift products to anyone installing a pick up camper. 2018 F 250 short bed crew cab.

Louis
8/4/2024
Couldnt ask for anything better. I am using them on a regular basis. When not in use I remove, clean and store them in my garage. No rust issues and the brackets attached to the truck are just as solid as when I first torqued them to the trucks frame. I definitely recommend them to anyone looking for proper camper tie-downs. PS: Their customer service, as always, I outstanding!
Condition: Surface Scratches
Notes: This product has multipel cosmetic scratches on its surface. It is otherwise new and unused.
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches.
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Mike L.
10/29/2026
Thanks John, we sure appreciate that! I'm glad to hear your tie-downs are working well for you...