Video Transcript for Let’s Check Out the BullRing Stake Pocket D-Rings

Hi, everybody, Andy here with etrailer.com. And today we're gonna take a look at these bull ring, flush fit, offset, retractable tie down anchors for your truck bed stake pockets. These heavy duty anchors are going to attach to your truck bed stake pockets and provide tie-down points to secure your load. And they're gonna work with your S hook and J hook connections. And the anchors for the offset will install in your front and middle stake pockets. Now these are custom fit anchors that are designed to fit the 2015 and newer Ford F-150 regular cab, super cab and super crew cab, and then the 2017 to 2020 Ford F-250 and F-350 super duty crew cab with full rear bench seat.

And then the 2017 and newer Ford F-250 and F-350 super duty crew cab with the rear 60-40 split bench seat. And then finally, the 2017 and newer Ford, F-250 and F-350 super duty regular cab and super cab. To confirm if these are going to work for your truck, take advantage of our vehicle fit guide here at etrailer.com and input the year, make and model of your truck, and our fit guide will let you know if these will work for you, or if we have something comparable that will work for you. Now, while the factory anchor points are inside your bed, where it can be hard to reach, these retractable anchor points are going to install in the stake pockets on top of your bed rails. Simply pop the anchor ring up when you want to use it to secure a load, and then you just hit it down, push it down firmly, and then it will be concealed and flush and out of your way.

So, these are gonna be very easy to use, very simple to use. Again, when you're ready to use it, you just pull that ring up firmly and as you can hear, it secures in place, this is not going to accidentally slide back down while you're using it. It's going to stay up as long as you need it. And then when you're done, push it down firmly and it will be nice and flush. That flush fit is going to be compatible with most tonneau covers.

And these anchors have a weight capacity of 1000 pounds. They're constructed of stainless steel that will resist rust and corrosion, and the nylon lower body is going to reduce sound. Now, these are going to match the grain and color of your Ford bed rails for a really nice factory look. Now, not only are using these very easy, but installing them is gonna be very quick and easy as well. This really requires nothing more than a Phillips head screwdriver.

And I have one here, that I've already loosened the screws on for our demonstration purposes. And, to install these what you would do first is simply remove the Ford pop out stake pocket cover, and then you're going to use a Phillips head screwdriver to loosen these two screws in the anchor and remove them, and that is going to allow this steel plate to drop down. Now, I wanna mention this steel plate is going to stay attached to this ring, so you're not gonna have to worry about it falling into your stake pocket and getting lost in there. So I just wanted to make you aware of that. So, while you are holding this top cover, you're just going to guide the anchor into the hole of that stake pocket. And you can simply do this from the side of the bed. And then you'll pull up on the cover, catching that lower bracket on the truck's sheet metal. And then you'll just hold onto the ring and allow that cover to drop into place, and then simply reinsert your screws and tighten them down with your screwdriver. And all you need to do is hand tighten these. You wanna be sure that you don't over tighten them, and then they're gonna be rea- They're gonna be ready to go for you. Now, these do have a lifetime warranty and these do come in a set of six, but we also provide, we also have these available in a set of four as well, that will work with the offset. So, I am including our item number for the set of four on your screen. If that's something you would prefer over this set of six. just take that item number and put it in the search field of our website here at etrailer.com and it'll take you to that set of four. So overall, I am really pleased with these, I think especially with the ease of use, you're gonna be able to always have easily accessible tie downs when you need them, and then when you don't need them you just simply push them back down and they're gonna be out of your way, but really, I'm also impressed with the ease of installation as well, so you're gonna have these installed in no time in your truck and you're gonna be ready to go. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..