SeaSucker Tackle Station - Single - 4-1/2" Vacuum Mount - White

Video Transcript for Let’s Check Out the SeaSucker Tackle Station

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this SeaSucker vacuum mount single tackle station in the white color. Now this tackle station right here will keep your tray of lures secure by using this shock cord until you need them. It will include this one PLANO 3600 series tackle tray to keep your fishing lures organized. And basically to remove it, all you do is remove the cord, slide your tray out, and that gives you access. Open your tray, and you have all the compartments that you can divide up into little ones for all your fishing lures.

Once you get it all organized, go ahead and close it, and you'll be able to slide this right back into the station. Take your shock cord, and that'll hold it into place. The station itself you can see is a rigid plastic material. It is very lightweight and durable, and it's held in place with this 4 1/2 inch pump action vacuum cup, and it'll allow it to mount to most non-porous surfaces, and it's very easy to attach and remove in seconds. Comes with this nice cover that's over the vacuum mount that you can remove it, that cover's used to protect this from any damage.

Remove that cover, and then you have your rubber mount here. And then what you'll do is just go ahead and put this up against your non-porous surface. And then as it's up against there, you'll put a little pressure from here, and then you'll just pump this. And as you're pumping that, it's forming a vacuum in here to hold this into place. And once you get enough vacuum, you're able to tell because that orange indicator on the plunger will eventually, as you're pumping it, disappear.

Once it totally disappears, that means you have enough vacuum in there, and it'll hold it into place, and it's all secure. If it slowly leaks out and starts showing orange again, just go ahead and pump it some more until it disappears, and it'll hold it into place. To remove it, right up here, you'll have a little end here, little edge right here. To remove it, you just pull on that or on this one, and it'll release the vacuum. You can remove it from the surface.

Again, when you're not using this, you do wanna put the cover on it to protect that vacuum cup from getting any damage to it. Pull rating on this vacuum mount is 120 pounds. You can see this is an all nice bright white color. It is made in the USA. Few specs on this, I wanna give you dimensions on it. The width, it'll be right at nine inches. Overall height, very top up here, 11 3/4 inches tall. And the total depth from the very front to where the vacuum cup will mount gonna be right at six inches. But again, just to demonstrate the access the tray, remove your shock cord, pull your tray out, get whatever lures you need. Once you're done, slide it right back in, take the shock cord and stretch it over it, and holds it into place. But that should do it for the review on this SeaSucker vacuum mount single tackle station in the white color.