bing tracking image

Best Subaru Impreza Cargo Carriers

change vehicle


Cargo Carriers Videos

Curt Hitch Cargo Carrier Review - 2012 Subaru Impreza

Today on our 2012 Subaru Impreza, we'll be test fitting the Curt 20x48 Cargo Carrier for 1-1/4 and 2-inch hitches, part number C18145. Now, we removed the included adapter for the 2-inch hitch so we're ready to fit it to the vehicle. We'll slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. With our bolt tight, our cargo carrier is secured to the vehicle. Now, we'll go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is 3-1/2 inches and the cargo carrier will add an additional 23 inches of overall length to your vehicle.



Curt Hitch Cargo Carrier Review - 2010 Subaru Impreza

Today on this 2010 Subaru Impreza Hatchback, were going to be test fitting Curts 20x48 cargo carrier, part number C18145. To mount the cargo carrier on our vehicle, well insert the shank of the carrier into our receiver hitch on our vehicle. Well line up the pinholes, insert the anti-rattle bolt and well tighten it down with a -inch wrench. Well go ahead and take a couple of measurements to check for clearance and exhaust spacing on our cargo carrier. We have about 8- inches of ground clearance from the bottom of the cargo carrier to the ground and we have about 3- inches of rear bumper clearance from the outermost edge of the bumper to the closest portion of the cargo carrier. We have about 9- inches from the exhaust tip to the closest edge of our cargo carrier.



Rola 21x55 Hitch Cargo Carrier Review - 2006 Subaru Impreza

Today on our 2006 Subaru Impreza we're going to be doing a test fit of the 21 by 55" Rola cargo carrier. It's going to have a steel construction, 300 pound weight capacity, and come with an 1-1/4" shank for your class one and two hitches. It's going to be part number 59507. Your hitch pin and clip are not included with this, so if you'd like to obtain one you can get it on our website, part number PC2. It looks something like this. Let's get it inserted into the class one hitch that we have here today. Insert your shank into your receiver and line up your pinholes.



Surco Products Hitch Cargo Carrier Review - 2006 Subaru Impreza

Today on our 2006 Subaru Impreza we're going to be doing a test fit of the Surco 20 by 48 cargo carrier. It's going to be a steel construction with a 300 pound weight capacity. Has an 1-1/4" shank for our class one hitch that we have here today and it will be part number 52017. Again, that's part number 52017. Let's go ahead and get it fitted in today. Also note that your hitch pin and clip are not included with this, so if you'd like to obtain one you can get it on our website, part number PC2. Once you have your shank inserted, line up your pinholes and insert your hitch pin and your clip.





Subaru Impreza Cargo Carriers Questions