Most Popular Fits 2-1/2 Inch Hitch for Ram 3500

About a year ago, I bought a new to me truck that needed a 2.5" hitch. I love this 3 in 1 setup. I really like that it stows and I can always have it back there. I haven't used the 1 7/8" yet, but there are plenty of old trailers out there that would need it at some point. I have used the 2" & 2 5/16" plenty. It's sturdy, looks good, and is super convenient, what's not to like about it.

Why did I wait so long to buy this awesome hitch! (I guess because i had my doubts, given the cost). This has been so useful as I have 4 bumper pull trailers with 3 sizes of balls. I dont move them all the time, but when i do use them, i often find myself using more than one in a day. I told my neighbor about my experience and he bought one for each of his trucks. It is SO easy to change the size...like 10-15 seconds

Went with the B&W due to the length of the shaft going into the receiver. My 2024 Ram's receiver is recessed under the bumper. This hitch is long enough to accept my Towtector product. Similar to Rock Tamers. Also, Brittany in customer service was awesome to work with as she guided me towards the product that worked for my application.

This ball mount is extremely heavy duty. I had a stock class IV hitch and aftermarket ball mount on my Ram 3500 SRW and it was bending towing a 14000 lb dump trailer. I upgraded to a class V hitch and this mount and it's working great. I have 6 trailers that I pull with gooseneck, 5th wheel and ball hitches. The only 1 that uses 1 7/8" ball is a little 5x8 utility trailer that I'm converting to 2" so I got the 2 ball instead of the 3. When turned sideways it works as a step to get into the truck but only if the tailgate is up. It doesn't stick out far enough when the tailgate is open. The reason for 1 less star is the documentation; you need more information to make the best choice. I originally ordered a different PN and it hung way too low bc is mounted under the existing hitch. To remove the stock hitch, you also remove the integrated mounting brackets for the bumper. I ordered a PN for a truck without a hitch and cut off the receiver tube with a torch. Also, I upgraded the 3 1/2" exhaust to 4" and now at idle the exhaust rattles on the much larger frame of the class V but a slight modification in planned to take care of that. Installation was fairly straighforward once I removed the original receiver tube.

Hitch ball and mounts all ready to the test!!! Great Products!! Five Star e-trailer team, very informative, fast and accurate shipping, perfect packaging and "GREAT" customer service"

This review does not just serve my recent order, but all of the orders before it. I have purchased a number of items from etrailer and everything was sent in a timely manor as stated and promised. All of the items I received were exactly as described. I watched a number of videos, read a number of diagrams and all of the help information was exactly what I needed. In other words I did not need to go anywhere else to get a full tow package for a Dodge 5500 that did not have one. I cannot say enough about how this website helped me. Also the pricing was about the best I could find and I did a lot of searching to make sure. This is a top notch site and I will absolutely come back here for my future towing needs.

Just received this mount and did the test fit with our trailer. We have not hit the road with it yet but I am confident it will perform perfectly. I am anxious to see how the cushioned feature works. We pull a box cargo trailer for business and just got a new Chevy HD pickup to tow with. It has a 2.5" receiver and hitch height is much greater than the Suburban we were using plus it had a 2" receiver. This mount is rated for far more weight than we will ever need but it was the only 2.5" size with 6" drop that I could find. We are very pleased with the product and the excellent customer service we got at etrailer. Thanks to everyone there for the very fast service and for keeping me informed as to the status of my order. well done!

These hitches are the best! And I scanned the world over to find only hitches that are made in USA like I do every product I buy. This is a very ingenious design that allows some shock absorption that greatly quiets any trailering. I bought two full hitches one for each ball size so that I would never have to change ball again! Great product!

Allows quick adjustment for my assorted trailers. No problems. I recommend.

Very happy with the hitch. Looked FOREVER all over for details when I got my new to me 2017 Ram 2500. This truck sits so dang high off the ground (4x4) I was worried about getting the proper range of drop for my different trailers. I used my 7x14 utility trailer as my baseline as it rides the lowest. From ground to bottom of my ball coupler is approx 16in. From ground to top of my hitch receiver is approx 25in. On the lowest setting my trailer sits ever so slightly nose totally empty. Check the pic with level. Once loaded I'm confident it will ride very nice. Plus I have all the range to move up for my taller trailers. Super beefy, seems well built, and I picked up the locking pins to go with. Etrailer as always had a great price and I've been ordering from them for years.

This forged ball mount was not machined flat around mounting hole. I had to grind a flat surface for proper fit.

Excellent product great performance have putting it to work towing 10k no problem love it

Like a kid in a candy store....Whole bunch of choices. Fast delivery

After a lot of research and comparisons I called etrailer to see what they could do for me on the hitch I wanted. Katie D. was very good at answering my questions and the order process was seamless. Received notification on the order as well as shipment details to track the item. What I like the most is the fact the lock is built in and the hitch looks great on the truck. Not only that it is solid and does not rattle. It showed up a couple days earlier than expected and will be ordering again with etrailer and Katie D. will be getting my business! Thanks.

Perfect drop height to pull my trailers. Have a 2024 Ram Power Wagon and the increased suspension height requires a large drop hitch to pull trailers at a better angle

Pleased with the drop hitch and both the 2" and the 2 5/16" ball. Will be using the bigger ball to move my travel trailer in the drive way. I've ordered from etrailer in the past and always satisfied with the products, as well as the customer service.

Nice hitch very adjustable use it to to pull Diamond C 208 lpx trailer with a kubota SVL 90-2 skid steer close to 16000 lb

It's great having the hitch always attached to the truck. It's just there when you want it, stowed and out of the way when you don't. I wish they had a one-ball version as I haven't needed both, yet.

Great product. Extremely well built and looks great. Very easy to put into stow mode and move it back to the positions you want to tow from. The rated capacity of it is great it’ll do everything your truck will do in a bumper pull mode. It is a must for a 19 F-250 with the ride height to get your load level and to make the connection a easier process.

Great service, came quickly, works perfect on our truck for hauling trailers and various loads.

It now makes it so I can pull anything except a 5th wheel. It will make it great on the ranch.

This is a heavy duty combo pintle / ball mount. It is replacing one that failed at the welds. Since this is a solid piece with no welds I expect many years of use.

The chrome trailer hitch I ordered initially seemed promising, but Even with diligent care, including not leaving it on when not in use and avoiding exposure to winter weather, the chrome trailer hitch still succumbed to rust. This unexpected deterioration highlights a significant flaw in its durability, leaving me disappointed in its overall performance.

I recently purchased a B&W a 7" Drop, Trip Ball Hitch from the factory. I ordered a 3" Reese instead of a 2 1/2" that I needed. Noah and Tammi in Customer Service jumped right on the issue and got me the correct hitch and a quick return/credit for the other one. Couldn't be more happy with the company and the hitch. B&W makes a bullet proof hitch and I will always recommend them. Thank you for all the help, David.

Solid hitch! If you haul heavy loads and worry about you current hitch, this is the one you need to remove those concerns.

If own a truck with a 2 1/2 hitch box this is the tow hitch ball kit! This is the Hulk of hitches! Great quality and durability. There is nothing I can tow or pull out of out of a muddy ditch! I’ve owned many truck and bought hitches. This is my first time with a 2 1/2 box and I feel very confident. The best hitch I’ve ever owned!

Perfect, my second GenY Torsion hitch. Upgrading to the 21K from the 16K. There's not even a close second.

I have yet to tow with this hitch because I just received it today. Upon receiving the box I knew this hitch was not for the faint of heart. It felt like a massive hitch weighing in at 118lbs. Taking it out of the box I could see that this hitch is built like a beast and will likely be more hitch than I will ever need, but I needed a drop hitch and after asking etrailer questions and doing my own extensive research, I decided this was the hitch I should buy. I like the fact that it will give a little more space between the trailer and the truck, it can be used as a pintle setup if the need arises, and it comes with two ball sizes. Using this for my enclosed landscape trailer I am hoping it extends the life of tires and suspension components. I will try and update in the future after towing with this hitch.

I will be using Etrailer for every trailer/ towing part that I'll ever need again. Great service and communication, kept me informed on every step of the process. I ordered my parts on Monday afternoon, received them Wednesday. I could not be more satisfied.

I was unable to find the correct size hitch in my small town, so I purchased the hitch, ball and pin from etrailer. The items were received in a timely maner and were securely packed. The hitch is well built and fits perfectly on my Ford F-250. Very pleased

you did a great job sending out the hitch that we ordered and ups saw that we got it. Thanks so much for the time and effort you put into this order.

Great service

I didn’t try it yet waiting for my 20 ton trailer to be built then I will let you know thank you very much be built

Customer service with etailer is excellent. My original order had a damaged box with hardware missing. The hardware was replaced quickly.

I have a truck with a class 5 hitch. Using the 2" to 2 1/2" adapter had a lot of play in it and this ball mount removed that play. The truck and me won't bounce around so much. Thanks for the great deal and fast shipping. Will be shopping with you again. Thanks again.

Over the last couple of years, I have purchased different parts for my towing needs from etrailer.com. The parts have ranged from hitch adapters to trailer tires. The customer service from Crystal K., and the quality of the products from etrailer.com have all been the very best that you could expect. I highly recommend that you at least consider etrailer.com for anything that you may need when you are towing or RV'ing.

The Gen-Y hitch is a beast and should last forever. It weights approx 55 lbs. Haven’t had a chance to use it yet and I hope that it doesn’t rust like I have seen in some reviews on YouTube etc. My big disappointment is the fact that it does not take my 2 1/2” to 2” sleeve (the 2 ball mount is 2 1/2”) so I can use another hitch with it to move a small trailer that rides lower than this hitch goes. I even talked to someone at Gen-Y to verify that it would work. They said it would. IT DOES NOT. To much pain to send it back. I’m sure I would have to pay shipping.

Gen-Y makes a great product. This is my second one I have purchased. The first one went with my truck when I sold it.