Most Popular Spring-Loaded Loop for Ram 2500

Not a bad install at all. Pretty straight forward.

This was my first order I placed with et etrailer. If one work could say it I guess it would perfect! I ordered on a Tuesday arrived on Thursday. I Placed the order got conformation and a name and contact to call if I had any issues, once it arrived I got another email letting me know if had been delivered. The installation video was perfect made it’s easy to install just followed the steps. When I need any trailer related items I will use them. As far as the B&W hitch i put it in a 2017 Ram 2500 with Ram boxes. The fit and quality of the hitch and design is what I have come to expect from B&W. I got this hitch to pull a gooseneck horse trailer. If your wondering if it will work with Ram Boxes it will.

I have used these three times now pulling a 14k fifth wheel. They work great. Easy to install and no huge hitch tying up my truck bed. The last hookup I had one of my safety chains hooked to short. Made a fairly sharp turn and heard a loud pop. I had it looped through the chain holder and back up to the camper. It straightened the hook on the chain but didn’t phase the Curt chain bracket in the truck. These things are tough.

etrailer was great! I received Gooseneck hitch in a damaged carrying case (used to store the hitch hardware). etrailer immediately sent a new carrying case. etrailer has GEAT customer service. Thank you!

Easy install. Just what I needed to prep our truck for our fifth wheel. Installation videos are very helpful. Thanks etrailer!!

Loved how eazy product installed instructions on hitch was great. Found on etrailer.com a video of how to install hitch. U will have to remove heat shild and exuast pipe to make much easier to in stall. The trailer ball is sweet u just flip up latch and turn then it's free to remove. Ordered hitch on Saturday free shipping and they called me to make sure it was shipping to right location. Then they emailed me when it shiped. It arrived on Tuesday on the same week. The price was great to. Will use hitch to pull 25 ft hay trailer and 24 foot stock trailer.

Awesome hitch. I will say some of the bolts are extremely hard to get to. Watch as many videos as you can. Most of the video have the trucks on a lift. Be sure and slowly graduate bit size on safety chain holes. I burned up a $23 bit on the first hole. Got it installed. Works great!

Extremely happy with the hitch. Shipping was fast, great product.

B&W hitch arrived and installing was a breeze. The ONLY problem I encountered was the lock washers included seemed inferior and better than half of them spread apart and I replaced them with known good. All in all good quality and etrailer was very good to deal with. I'll still give my whole experience 5 stars....maybe they just got a bad batch of lock washers.

Easy to install with minimal modifications to the truck. This hitch has held up well towing a 44 ft trailer loaded to the max. Great product.

Great product and it gets used regularly. The quick release is very convenient. My only complaint is that there are no options for an extended gooseneck ball. Similar to the Draw Tite 5" extension. This hitch will not allow you to install a conventional pin to use the draw tite extension as there is a thick piece of metal in the way. The quick release on the ball is the only option.

Good hitch easy install just had to loosen the bed bolts to fish the nut plates above the frame other than that pretty straight forward

Have been driving cross country since purchase. I'm am also using the companion 5th wheel slide with my application. With numerous slides and coupling and uncoupling. Both have performed flaulusly. Cudos to BW.

Extremely easy to order Shipping was fast Would definitely order again from you

very high quality product. Installed in a couple hours. Only hiccup was not double checking the centering guide had not spilled out. Mine did and I had to undo the 4 big bolts, fortunatley I had not torqued them yet. Other than that, the install was seemless.

This was a new installation for my 2023 Ram 2500. The fit was perfect. The install instructions were easy to follow and accurate. I did the job myself with the help of my son, without a hoist. You do need mussel.

Hello the gooseneck in bed hitch has been a great addition to my truck pullong a 40 ft long trailer fully loaded thanks for the great hitch

this installed correctly on my 2005 dodge ram 2500 diesel per instructions for installation with air bags. I have hauled a 42 foot 3 axle car trailer for over 6,000 miles with no issues. This was a great purchase. Thank you

I purchased this to pull a 25Ton GN trailer with heavy equipment and so far it works great! Good price point and reliable product. I would highly recommend this product and trailer. Thank you!

One year later and it’s probably the best thing I could have added to my truck. Haven’t stopped hauling since I installed the turnover hitch

Great hitch and easy to use. I did have to lift up the bed a little bit to install it. Took me about 5 hours because of that but otherwise it is a great hitch. The rings for the safety chains stay on the bed and the ball flips over and stows away completely.

Fit perfect was easy installation

The Hitch came faster than expected It took about 2 hours to install thanks to etrailer's [on-line video]instructions very happy

Install went well. Was shipped the wrong plates with the nuts in them but customer service reacted quickly and got me what the ones I needed.

Ordered this after deciding to go with it over a B&W kit due to me not using it a whole lot and the price difference. When I received the package 1/2 the hardware was missing because the inner box it was in was all broke apart and the outer box was not sealed up. So I would have to give the packaging and shipping one star because I had to go spend an extra $75 on grade 8 hardware. The paper directions were not totally clear on several thing so we resorted to the video which helped a lot. The two large carriage bolts that go in the rear cross member are a little deceiving because the video makes it seem like they slip right in. However, the heads were larger than the pass through in the frame rails so it took quite a bit of extra time and ingenuity to get those fished through there with the plates.(The carriage bolts survived shipping so they were what came with the kit). In the video it showed where he cut a large u out of the inner fender to clear the pull handle and notched the bed that looked kind of sloppy. With a few extra measurements you can just cut a hole in both for handle to slide through and give it a much cleaner look. Definitely recommend putting a bolt through receiver holes and using a strap to hold up center plate through hole in bed after you get it into place. Makes life a lot easier until you get the bolt ls in. Overall this hitch works and functions great. Install went pretty smooth with two people and I would recommend it to anyone needing a hitch.

Great product w great instructions. It was an affordable package that installed decently. We have used the hitch for a year now and have had zero issues w it. The only reason for not giving it 5 stars was because the cross bars that go between the frame rails needed to have the threaded holes chased w a tap to remove the powder coating prior to installation. I initially tried installing it without chasing the threads and the bolts started to get very tight before the parts even pulled together. Once the threads were clean, everything assembled very well. The hitch takes time to install, at least if you want it to look good and be correct. On a 1500 ram, you will probably need to install some form of helper spring or air bags to prevent the rear from squatting from the weight of the gooseneck trailer…the factory 1500 coil springs are not firm enough on their own.

Very good service and hitch arrived a day earlier. Videos made it easy to install.

under bed gooseneck mount 2017 RAM 3500 reg cab diesel 2WD I installed it myself sitting on the ground with the spare tire out. a bit challenging for one small guy . But got-er done. Only residual problem, it ever so slighty touches the exhaust pipe when starting the engine. Hauled my 26' 10000 lb trailer to Michigan and back. Like it much better than the "universal" mount in my 96 Ram 2500 CTD.

the fit was perfect. easy assembly and works great. Thanks to all. Ben.

This was not to difficult to install. The most nerve racking part was cutting a hole in the bed of my truck. So far the finish is holding up to the weather and none of the bolts have come loose. Now, I just need to get a Gen Y or Reese Goosebox for my 5th wheel to eliminate the giant hitch in the back of my truck!

About a year ago i purchased this and i honestly have not put it to use. However, i did get an email from the company asking me about my experience and it was just a nice thing to see. So, my experience installing it went very well. Online directions from the company made it a breeze without any questions. I think the whole process took 2 hour with my dads help. The hardest part for me was cutting the heat sheild off the exhaust because i didnt have the right tools.

The kit arrived in two days. The quality is very good. All the parts fit as described. We were able to install it in a few hours without a lift. We plan on pulling a 14,000 # trailer to move farm equipment. This trailer will replace an old 12,000# pintle hitch trailer. I would definitely recommend this kit to others.

I like the hitch but when ai am pulling my trailers, and I am moving them around at low speeds it seems that there is a good amount of movement in the hitch and the feel in the truck. I’m not sure what that is but I have used trucks that didn’t have that feel in them but mine definitely does. We followed all directions and torqued all bolts to the required amount. Maybe someone can shed some light on what that maybe. Thanks

Easy installation, great video instructions!

I installed this yesterday, along with the Companion 5th Wheel Hitch. Very good instructions, well written, great illustrations. Everything fit perfectly, no struggles with alignment. Very good hardware. Looks to be very sturdily built, the welds looks great. One thing to look out for - on my 2016 Chev 3500 anyway, the exhaust is in the way of drilling the passenger side retractable chain hook holes. You will need an angle drill or drill with a flexible extension cable. Or get your steel rule out and do some serious measuring like I did and drill the holes from the top down. I drilled the accessible driver's side, then transposed those measurements to the passenger side and drilled from the top using a small drill. After hitting the hole, I used progressively larger drills until I found the edge of the 1/2" hole in the center plate, then hogged out the hole the rest of the way with a Dremel grinder. Not a big deal, just had to get a little creative. Over all, excellent experience, from the purchase, the help from customer service (fantastic people!), fast delivery and easy install. Highly recommended!

I was converting a fixed/welded gooseneck ball on a CM flatbed to a removable one so I could also use a B&W Companion Flatbed Gooseneck to 5th Wheel Trailer Hitch adapter. Although it wasn’t easy to find someone to cutout the old ball and install the new turnover ball, it was done expertly and the hitch works perfectly! Very easy to operate from the wheel well and turn over for a flat area for cargo. Always had a turnover ball in the past and highly recommend this one for a conversion.

This unit was very handy to be able to purchase and install on my Bradford Built flatbed so that I could install my B&W companion hitch with flatbed base on the truck. The welding was all fairly straight forward and didn't require much except for a few washers and a piece of flat steel for a spacer. The one down side is that the hitch pin/handle does not have any built in twist-n-lock method to lock it so the pin remains disengaged for the ball or companion assembly install like on the common B&W under truck bed assemblies I've had on several trucks. We ended up installing the pin slightly out of line so that the tip of the pin would catch on the exterior of the receiver when pulled out and then when I wanted to engage the pin just push up on the handle and press the pin back in. I do like that I can still cover the hitch hole with the cover plate as seen in the picture.

EASY FAST INSTALLATION

Easy to install.