# 1
Swagman E-Spec Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount
I've been looking a eBike racks for about a month and finally decided on this Swagman rack because it's rated for use on an RV. That's what I needed because it will be on the back of my travel trailer. I had it on my wish list on another site but etrailer had it for $[XX] less, so I jumped on it. It was fairly easy to put together, I installed it on the hitch on my truck so I wouldn't have to wrestle with it on the floor of my garage, that made it easy to assemble. This rack is very well built, and is very solid, it doesn't move while on the hitch on my truck (I installed the RV hardware) so I have no doubt that in will be fine on the back of mhy travel trailer.
So far so good! I have used it on the back of my Jeep Grand Cherokee and on the back of our travel trailer. It is a pretty solid e-bike rack. I would definitely recommend this e-bike rack. We did purchase it for using on our travel trailer, but also works great on the back of our cars, which have 2" hitch receivers. On the travel trailer we also installed a Draw-Tite Hitch, along with a Curt 14" hitch extender for 2" trailer hitches and a Malone anti-rattle hitch lock system. We purchased everything from etrailer. I am very happy with how all of this works together for hauling our e-bikes on the back of our travel trailer.
# 2
Hollywood Racks Destination Bike Rack for 4 Bikes - 2" Hitches - Frame Mount
Super easy to load 4 bikes and go. Takes me 5 minutes to get all 4 on the rack, compared to 15-20 with the rack I had before. I would change nothing honestly. It's a fantastic rack. It has performed great. I can now quickly load 2 kids bikes and 2 adult bikes on the rack with no special adapters. We can hit trails faster and spend more time riding. There is no real downside. It's also significantly cheaper than competitors and provides a much easier and smooth experience. Is it a great rack for small families who want to ride together. No adapters needed for different sized bikes and super easy to load and unload. I would not recommend this particular model if you don't plan on using more than 2 slots. But for 3 or 4 it rules.
One year in and it is great. I have a 2021 Subaru accent and it is perfect. We carry 4 adult bikes and while it is a tight fit it works great. The rack is VERY solid and does not move when tightened up. Over the past year we have used it 3-4 times with no issues so far. It is easy to use and one person can easily load and unload the bikes. The tilt up feature is nice and when the rack is down and there are no bikes we can open the back hatch without an issue and there is plenty of clearance. We have been very happy with the performance and the price.
# 3
RockyMounts BackStage Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount
This is a really good rack. We do a lot of car camping out of our Subaru Outback and I wanted a bike rack that would swing aside so we can raise the hatchback and easily access the camping gear, cooler, duffel bags, etc that we carry in back (see photo). This rack 100% solves that problem. Further, the bike hold-downs are very secure. I use them on their own for shorter trips. For a longer trip or one that may involve a rough road, I supplement them with a ratchet strap, but this is probably just unnecessary paranoia--the hold-downs are excellent. My one heads-up about this rack is that it is heavy. I am a large, strong man and can attach it myself, but I do not look forward to the chore. This is a beefy rack and the weight is unavoidable. I welcome how sturdily-built the rack is. We typically carry my normal bike and my wife's heavy e-bike on it, and the rack is totally up to the job. Highly recommended. I have zero regrets about the purchase and the investment in this rack that will serve us for many years to come. The design is pretty much perfect--I can't think of one thing I would change.
We love our RockyMounts BackStage Bike Rack. The fact that it can hold our two e-bikes and swings out for rear door access makes it perfect for vanlife. Service and communication from etrailer is outstanading!
# 4
Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount
This rack is heavy, easy to assemble and has zero wobble. The reason I purchased this rack was due to the quality of the rack, but also my last experience with trailer. Great customer service, and if you have a question, it's pretty easy to get hold of a real person! I actually purchased this for an Ebike.
Excellent bike rack. Easy to put together. Fits perfect with the etrailer curt hitch. This is a heavy duty bike rack, which also means it heavy but still manageable. Using this for my Aventon Ebike.
# 5
Swagman Chinook Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
Works for my fat tire bike. Once it's set up, it's easy to install and remove. I had to cut out some of the plastic cladding on the underside of my bumper on my 2014 Subaru Outback. Good value. I've had no issues.
GI love the Rack, it is easy for me to handle, (as a 89 yearold rider.), two bikes ride and fit very nicely. Like how it folds down,and how it folds to open the tailgate . Great quality for the money, I would highly recommend this rack
# 6
Kuat NV 2.0 Bike Rack for 4 Bikes - 2" Hitches - Wheel Mount - Metallic Black
I have had my Kuat NV 2.0 4-Bike Platform Rack - 2" Hitches - Tilting - Metallic Black for a month now. Amazing engineering. Solid rack. I have four or five old (cheaper) racks and this is the best rack I have ever seen by far. Extremely happy with this. I will reserve comment on whether or not a bike rack should cost $xx.xx but it’s a great rack. Possible improvements: 1) The rack is just too heavy. With the amazing engineers that worked on this, knocking 10 lbs off the rack would be easy. I know it is one of the lighter ones available but it is still too heavy. The center rail is all steel and the heaviest part. The outer part of the swing arms are steel (inner part is aluminum). The arms have really nice bushings on the hinges. The whole thing is amazing, well-built, and well-engineered. IDEA 1: lightweight the center rail by using U-lube instead of square tube. Or just make holes through the top and bottom of he square rail. IDEA 2) The Aluminum platforms are amazing. But use less Al and more plastic. The ones for the back tire add significant weight. 2) Someone came up with a great idea for dealing with one aspect of the weight problem. One problem is that at 54 lbs. when you put it in the receiver it’s hard to align the hitch pin hole by yourself. So I kludged up a stop using a ring clamp and some plastic tubing. I was going to tap a hole in the center rail for a stop screw but then I could not adjust the depth for different vehicles. So I went with the ring clamp. When installing it (see photo) I noticed that someone already had a great idea and tapped a hole to add a stop. I assume there is an adjustable clip that is secured by the recessed screw. But I did not receive the clip. I just have a beautifully designed tapped hole and recessed screw with no way to use it. Probably an easy answer to this one but i didn't get a clip and didn't see this referenced in the instructions at all. 3) Back tire surface. It almost doesn’t matter where you ride the mountain bike, somewhere along the trial there is sandy, gravely surface that gets on your tires. I have gone in five ‘dirt’ trails and covered my tires with smooth mud thinking that I wasn’t going to hit sand. Then when I get back to the parking lot the mud collects the sandy gravel—either in the gravel parking lot or at the edge of the asphalt lot. Then I put the bike on the beautiful smooth aluminum carrier and scratch it. There should be an improvement to resurface the area where the back tire goes. It looks like there has been some weak attempt to provide a plastic coat but it doesn’t work. I am going to buy some rubberized truck-bed liner or spray rubberized spray rust proofer to refinish this. 4) Last possible improvement. The only people that should be buying this bike rack are people with high end mountain bikes. The reason for the platform carrier is to accommodate the odd frame geometry of mountain bikes and to protect the full suspension from dangling and getting air in the cylinders. If you have a full carbon road bike then just hang it on the back of your car with a $200 bike rack. And no one is going to carry $120 steel Walmart BLO’s with a $xx.xx platform carrier. They are going to strap them to the roof of their minivan. So you could even make this carry less weight capacity to make it lighter. And just tell people to put the 60 lb bike (like ebikes) closest to vehicle and lighter bikes in the back. EVERYONE has a lighter bike… either aluminum, carbon, or just a kids bike. This rack can carry 250 lbs of bikes (4 x 60+). The market for carrying 250lbs of bikes is nearly zero. delivery was perfect. Assembly was easy with two people; probably could do it with one. As you can tell, it is a real stretch to find anything wrong with this. But my minor comments are above.
This product arrived quickly, in good condition, and all steps were well-communicated by etrailers.com. This product seems pretty well-made and I added a Kuat Pivot to assist with swinging our 4 bikes out of the way. Very well thought out products overall and we look forward to using it for years to come with our travels. Wish we knew that that Nv 2.0 and nv 2.0 add-on each came with a child bike adapter. I had separately ordered 2 from Kuat for my kids and had to eat the shipping costs on the whole return.
# 7
Yakima HoldUp Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount
Extremely well made hitch rack. Fantastic service from etrailer.com
Works well for transporting two 29" wheeled mountain bikes. However, after one year it's starting to rust in several areas (see attached photos), and the front wheel arms are becoming increasingly difficult to raise and lower. Finally the locking cable is extremely rusty as you can see in the attached photo. I'm not sure how durable this rack will be long term.
# 8
Thule T2 Pro XTR Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount
This bike rack is awesome. Our two e-mountain bikes fit perfectly on the rack. We have taken them on long road trips with no issues. Great bike rack.
Great sturdy rack, and the wheels are very beneficial. Have never been a fan of the Thule locks, but the rack makes up for it.
# 9
Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Metallic Black
After much searching, I decided to purchase the Kuat NV 2.0. I was fairly easy to put together….” Read the directions “ it will tell you exactly what and how to put it together.. Great instructions easy to follow. I was able to adjust the wheel cradle to fit my bike quickly. I was a SMALL problem…. I did not get any information from etrailer like I have in the passed… which was strange. So I did not know if they were processing my purchase or not… The money came out of my account. So I after my bike rack showed up… I sent a text to them, with in minutes I received at response, that said they were looking into the problem.. maybe 20 mins later I got a response from them … It seems I Fat Fingered my 1 letter on my e-mail address so etrailer could not send tracking information… Thank you so much GREAT SERVICE. I will use them again
Product was pretty easy to assemble. If assembled it solo, and it was a bit tricky keep the trays level as I bolted them to the center beam. I used the foam blocks that came with the packaging to keep them level as I tightened the bolts. The product looks fantastic in gloss black (matches my trim). Have not mounted the bikes yet (it's winter) though I did mount the rack in the hitch and took a test drive ... all good.
What our customers are saying:
"I ordered a trailer hitch and a bike rack carrier the order was shipped with in three days. To put the hitch on only took about 30 mins. only had to drill two 1/2 holes. fit like a glove."