Most Popular CURT for Ford Explorer

Hitch arrived very fast and fit perfect on my 1999 Ford Explorer...very satisfied!

The hitch and wiring harness were very quick and easy to install. The design allowed the full size spare wheel/tire to be kept in the original location. Shipped the hitch and wiring harness in the same box and it got here fast. Very happy with the purchase.

My entire experience with etrailer.com was outstanding. This Receiver was exactly as advertised and fit beautifully. The website is fantastic and easy to navigate. The customer service is superb! When the product arrived, it was packaged expertly and easy to handle. The product was great, but it is everything else that will keep me coming back for all my trailer needs. I can't recommend etrailer.com highly enough. Stop looking everywhere else because etrailer is the only site you need!!

read instructions !

The fit was poor and took several hours - maybe 5hrs I think to install. Optional instructions should be mandatory instructions like ways to spread the hitch since it was around 1/4 inch too narrow. The current instructions are backwards in order. Wasted a lot of time and with contacting support. Also a big challenge to remove the 1-1/4 inch receiver bolts to replace with the bolts for the 2" receiver - then need a ton of work to remove with lube, heat, breaker bar, impact, etc. And to put in the new bolts required oil and lube.

Very easy to install it, fits perfect and made very strong. Someone really used his head when he designed it. Only one thing- bolts don’t fit they are little smaller but I used the original so all good. Thank you etrailer

Hitch and wiring harness works great on my 2015 Ford Explorer. install only took about 30 minutes. would definitely recommend purchasing from Etrailer.

This was a perfect fit for my 2012 Explorer. It looks and functions great and the price cannot be beat! eTrailer is a great company; you can tell this by the organization and details on their website. Tracking the package in transit is a breeze and items arrive on time. The hitch is solid. The moment you take it out of the box, you’ll know you got a great part. I was able to install it myself, though it would have certainly been better to have someone help hold it in position just to get a bolt started on each side. In any case, it does not take long to install. All hardware was included and directions are minimal and straightforward. You’ll need some WD-40 to get the exhaust off its hangers, a strap to support the exhaust while it’s lowered, a socket set, and a torque wrench to tighten the bolts to specs. I did not have a torque wrench that went all the way up to the required torque value, so I ended up purchasing one at the local box store. If you don’t like acquiring tools, you could always ask a neighbor or maybe rent one from the local auto parts store. In any case, with the new wrench, as well as the 4-pole wiring harness and magnetic trailer lights (also purchased from etrailer), I still came out way ahead of what it would have cost to put on a hitch at the dealer. In essence, the $450 bike rack that goes in the hitch receiver and the quality torque wrench ($80) serve as “free” gifts to the family/myself for the DYI installation. Finally, some might want a Ford OEM hitch setup but the curved design of this particular custom hitch looks great. Happy hauling!

This hitch did not fit as delivered. The spacing between the vertical mounting ears was too narrow to embrace the vehicle's frame rails by 5/8 inch! As the original owner of my 1996 Ford Explorer, I attest to its integrity and history of no damage and no abuse. I am a professional mechanic and was comfortable with, and capable of, spreading the attaching flange, "ears" gap a bit wider to fit the car's frame rails. It was much more of a chore to install than expected. All is OK now. It was disturbing to view the fine print at the top of the instruction page, 757230, which states, " Will not fit with full size spare tire". That contradicts your web page's guidelines and applications charts.. This hitch, in fact, does accommodate the full size spare on my vehicle. The quality of constriction is good and the powdercoat finish is good The packaging was good. The hardware kit and diagrams are good. The free freight is remarkable and the two-days delivery time was astonishing!

The hitch itself is well constructed but does not fit the Explorer without modification to make it wider to fit over the framerails. I had to take it to my mechanic to be altered to fit.

Robust construction, nearly perfect fit. Installation was straightforward.

I received this hitch with some chips down to the metal. So I repaired these. Alll holes lined up except one. The hitch was bent 1/2 inch on one side. So with a steel rod, wood blocks, and a pump jack, I bent the hitch into place. All the extra work is why I gave this hitch a 3 star rating. I now have a 5 star hitch that works great with my Thule bike rack.

This Hitch Reciever fit my '89 Ford Ranger perfectly. Had it installed in less than 30 minutes. Heavy duty design. I've had it over a year now and it has held up great. A huge improvement from the original ball in bumper design.

Fits right. Had to cut the corner at a 45 on one of the square shim washers due to a lip on the frame rail at the spare tire. Wouldn’t sit flat. Other than that, about 30 minutes from start to finish.

Fast shipping. Mounted right up and looks great best price on internet.

Fast shipping well packaged everything included to install. Quality product

It's a perfect addition to my son's PT cruiser. Now with the retro look of the PT cruiser he can tow his 1980 smoker craft boat with the antique outboard motor. Thanks again E trailer for great products and my fifth hitch I purchased from you.

Great product, installation was easy and instructions very good. I didn't use any power tools and had to jack up the car put it on safety stands and use a creeper and it only took me one hr. I removed the spare tire and removed both brackets from the frame for the muffler. The T-one wiring harness yellow wire could have been about two or three inchs longer but I made it work.

Easy replacement for GM's rusted out 2011 Chevy Silverado 1500 hitch. Attaches to bumper and vehicle frame with 6 bolts (which lined up perfectly). The original GM hitch used 8 bolts but was rated for 5,000 lbs gross trailer weight compared to the Curt#13322 hitch's 6,000 lbs. The powder coat finish on the outside of the hitch looks flawless. Hopefully the inner walls of the tube, where salt and water will collect, hold up. Curious why the access holes to the tubes are both located on the ended plates, instead of having one hole at the bottom of each tube to act as a drain.

I purchased this hitch to replace the factory receiver hitch on my 2007 GMC Sierra (new body style) that had rusted out and wasn't safe to use. This was a perfect fit and installation was easy except for holding the hitch up while starting the first bolt. Two bungee cords helped with that. The hardware worked great and the instructions were quite good. I did not need to drop the spare tire as was suggested, which did speed installation. Installation time was 30 minutes but that included three trips to the tool box and extra time spent using healthy amounts of anti-seeze. No drilling was required. Five stars.

The quality of the hitch seems very good. The finish is thick and being in Canada with salt on the roads, it should stay rust free for awhile. Mounting the hitch on my 1988 Ford Crown Vic went well. There were no holes in the frame so I had to drill all 4 holes. At the holes near the end of the frame I could not use the supplied bolts due to the way the shocks on the bumper went inside the end of the frame. All in all it was an easy install with the car on a hoist and a helping hand from my brother.

Probably would have gave five stars but I was unaware that the actual hitch itself doesn't come with a ball attached to it. You have to buy the ball separately. I thought the ball came on a hitch or at least a standard ball came on a hitch. I guess I should have looked into it a little more. It's not a big deal but now I I have to chase down a ball. Other than that, installation was straightforward and the hitch and frame seem heavy duty. The wiring harness I ordered also seems pretty heavy duty and should prevent any shorts in the system

Nice hitch, install was kind of a chore. Took about 3.5 hours messing with everything. I did have to bend one side of the hitch to make one of the bolts go in. This took some time. I get it’s probably a manufacturing/engineering thing but my suggestion would be to put some troubleshooting tips in the instructions on how to safely bend one side. Also the driver side panel cut out is incorrect. Needs to be cut farther North if you’re looking at the picture. Other than that, I’d say I’m glad I purchased and it’s a good product, just needs instructions update. I did install this hitch by myself and used jack stands to hold up both sides to make it easier.

I live on acrea I was not notified that the delivery had come until 12:30 at night had to get up out of bed in my pajamas and drive my UTV down to pick up the trailer hitch by the road the box was pretty trashed I'd get the shipper one star product itself is very well made nicely painted although there was a few scratches from the rough shipping.

Great price for a heavy duty steel hitch bumper that was surprisingly easy to install by myself with the right tools and video instructions.

I absolutely love mine! It helped me tow many things with my car. I have gotten so much use out of it already, and plan to use it a ton more!!

Fit and finish are very good. Working on a 7 year old dual exhaust Charger, it took me a little over two hours to get it done rolling around on the floor by myself. Most of that time was taking the exhaust apart and removing the exhaust fascia chrome things. Those didn't make it back on. Passenger side bolts not the easiest to get to, but the fishwire thing worked perfectly.

With my 2 sons installation went well. We've used the hitch up hold our bike rack as well as a small metal shelf top transport items such as ice chests and suit cases. I have to be careful over speed bumps or it will hit. This hitch has come in very handy.

The hitch receiver was busted through the box

Quick easy and with great support. I love etrailer for their service and support.

Always great products from Curt. It took longer to wire the trailer lights than it did to install the hitch!

I'm very happy with this purchase. I use the hitch for my bike rack. I have not towed with it yet. The installation took about 45 minutes and I recommend having a car jack or second set of hands to lift the hitch into position.