Most Popular Trailer Connectors for Chevrolet Equinox

Works great as an adapter. I used it to convert a truck camper electrical harness to a Lance camper receptacle.

Hooked up only 12 volt for charging the battery on my dump trailer. Works fine.

Worked out well.

2 things. 1st@: I think there should be an option to pick tinned wire. 2nd: The ring terminal for the ground needs to be bigger.

The plug is different from original cord. Doesn’t look as good but we’ll see how it works. 1st new cord

It's a bundle of wires with a plug. Hard to make this type of part special above other brands. Price is the big factor. Not quite sure why this one is 50% less cost than some others. But works as expected. Solved the dreaded taillights blinking while traveling on the road.

This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.

Decent enough plug. It was an easy install. I would have liked to have allen screws to get a good bite, but will check the connections after a use or two.

The person who helped me find the correct part went above and beyond just taking my order and helping me find the correct part. Now I know why my dad suggested that I try etrailer to find the part I needed.

It’s nice to have an inexpensive replacement part rather than buying another whole harness!

Sooo, bought another one to match my truck side connection as GM uses Pollak, which are known to not play well with other brands. The design is just a wire clamp to wire it, which I did with the first one, but trying to get it secured I stripped out the screw. There are no torque specs provided. I’ll move to crimped ring terminals on this one and dial back the torque a bit.

It served its purpose to convert 4 connection to 7 connection to make it compatible with Toyota 7 connection set up diagram which is different than many American or other 7 point connection. Thank you E-Trailer . 5 stars and it's working just fine 1 year out from installing.

Have yet to install on the vehicle - Product seems to be a quality item

Want I ordered

Used this as the connection point for the Roadmaster diode wiring kit. Seems to be well made and will hopefully last a long time. I did spray paint it flat black so it blends into the front bumper of my “toad” a little better.

Very sturdy and secure attachment, much better than the cheaper plastic ones that I have had break before. However, the rubber boot doesn't stay around the wire attachments

Love the compact size for both 7way and 5/4 way connections. Install was pretty easy. The wire instructions are for a traditional 7 way color code. Would be nice if they included a RV color code and heavy duty. But just a multi meter or cross reference with your wires manual is all that's needed. I did not give 5 stars because I did not like the 2 flimsy hook connection to attach the wire shield backing to the connector. I reinforced with some black tape because it was sperated. Also would have liked if the 5/4 way door was spring loaded just like the 7 way. I mounted my connection sideways to use gravity to help keep that flap close.

Heavy duty constructed is definitely a plus there are a couple shortcomings that I was surprised to see.. first off for it to be truly waterproof where the cable enters the back of the plug needs to be more waterproof. Also stainless steel screws were not used and I just don't understand why they are selling a product that cannot stand up to the test of time and these are two rather inexpensive improvements that can be made.

Working great

Great company

This is very heavy duty looking connector and wires. I needed one to replace the damaged one on my Demco car hauler which is built for rental market. This looks as heavy duty as the original. Which didn't break but someone let it drag on the ground and wore half the pins off.

I have been very pleased with etrailer orders recently. Everything shows up when expected and products are as expected. Attached are a couple before and after pictures of my recent project to add lights to a cargo rack per my wife's request. Thanks for the professionalism of all at trailer

Note to self: Always push brake pedal firmly before releasing parking brake. especially when Jeep is slightly uphill from Blue Ox tow bar. :-) This was a very quick fix, (unfortunately not quick enough, the wife saw me before I could hide it) maybe took 10 minutes total. A socket set and a small phillips screwdriver are all I needed for this replacement.

Works, kind of wish it could have been placed in a different location

Looks well made and what I like most and why I bought this one was because of the newer style plug that comes in it. I have yet to test it out but I got it wired up.

Well, my first impression of this item is it is very sturdy and will be a great addition to my trailer.

Excellent Quick Delivery When you are driving a Test or NASCAR Hauler you need replacement parts very quick, just like a pit stop. Thank You very much for the rapid delivery. Mint Moore III Ford Performance Race Hauler Driver

parts purchased from etrailer.com for my homemade cargo trailer

The quality of the materials for this wire connector is very high, especially the insulation on the wires. One thing to note is the wire colors do not match the standard colors associated with this style of 7-Way plug. Definitely use a continuity tester to determine which wire goes to which blade in the plug. Other than that, this is a good product for the price.

Sealed unit at connector. No possible corrosion.

This was easy to install looks great and works excellent. have had on issues with this product my trailer lights are always working and keeping me safe.

I didn't use the male end, it's in the tool box for later use. I used the female end on the front of my Jeep GC for the light hook up to my motorhome. I used mounting bracket #118137 and wiring harness RM-154 to complete the wiring part of the set up. Everything installed nicely, and a year later is still working great.

I've had this in use for over a year and they don't build them like they use to. I use this on a gooseneck trailer and the piece of plastic behind the spade connector for the clearance lights and brakes has melted, allowing the spade connector to lose contact with the plug on the pickup. So the lights would cut off in the middle of the night and would have to wiggle the connection till I could fix it. I have an older Hopkins plug and never had this problem. To fix the problem I ended up putting pieces of thin copper wire behind the spade and have done it twice since the plastic melted a 2nd time and once again the trailer clearance lights would quit working. Attached are before and after pictures.

Customer service was great, I called for help connecting the 7-way and they walked me through it. Shipping could be better

Heavy built. Very much wish it had a cable clamp on the backside similar to its male equivalent. As it is all the strain on the wiring/cable is supported by the terminals themselves.

I've never really liked Flat-4 type connectors. Unless you leave them dangling, they usually require that you crawl under the vehicle to connect them. (...Murphy's Law dictates that this will always be when it's raining or snowing). This Pollak 4-pole round socket, along with a Tow-Ready harness, and matching trailer connector, provides a neat, factory installed look, that's more convenient, and durable. My orders from etrailer arrived quickly, and with great seller communication. A+

I do not recommend this product. I bought this for my truck. It seems to be the nicest looking plug on the market but after the first rain, the plug was filled with water. I changed the location from the hitch to the bumper and once again the plug was filled with water after it rained. This condition will obviously lead to terminals corroding and/or wires being shorted out. I have bought a different style plug, unfortunately the same brand but hopefully I will have better luck. May be able to drill a small drain hole in the casing to allow water to escape but shouldn't have to do this on a new product.

I bought this socket for my 2006 Volvo Xc90 to wire in the 4-Pole harness I also purchased from etrailer. Already had a few 7 Blade to 4-Pole adapters from my previous vehicle, and wanted the option of adding a trailer brake wire for a small camper later on so that was the main reason for the purchase. It also went very well with the Hidden Hitch I had already installed, bracket mounted right up to the existing tabs on the hitch. Super quick and easy install, as all of my etrailer purchases have been. Looks great on the truck, and functions great with the 180 Degree cover.

Just what I needed for my home-built bike carrier. My wife rides an e-tricycle and by the time I loaded the trike and a couple of bikes on this platform, you could not see the car's taillights or blinkers. This harness worked perfectly!

Used this to rewire a 6 x 10 trailer. Inserted the wire through 3 feet of metal conduit to keep it from being damaged near the coupling. So now the only exposed wire is the ¼ inch right at the connector.