Best 2023 Toyota Tundra Camper Tie-Downs

very secure and super easy to install on my 2021 tundra. The front ones were a little tricky to install but also very secure.

This was a perfect fit on my 2017 Tundra. Installation took about 30-45 min per side. The most difficult step was threading some bolts through the frame holes. They hide nice when not in use.

Click to Enlarge

Click to Enlarge

Click to Enlarge

A bit challenging even for a person with a lot of experience with tools. They want you to fish the bolt and washer through the frame and the mount at the same time, not going to happen with only 2 hands so i went to ace hardware and got some neoprene washers to slide over the bolts to hold them in the frame holes, then gently slid the mount onto the bolts. The drivers side bolts cannot be fished through the tight turns inside the frame with the washer attached to the bolt so getting the washer on the bolt while inside the frame was difficult. I was also concerned that my side exit exhaust would be in the way but as shown in the picture it wasnt an issue.

Click to Enlarge

I recently purchased tork lift camper tie down for my 2012 tundra. shipping was quick,while waiting for my tie downs I put some blaster on my bolts and let it do its job. I did the job on the ground with the help of my son. Totally installed in a little over 2 hours. Great product as are the other items I've ordered from etrailer. I certainly will use and recommend your services to others. Thank you

Rear tie downs for my 2001 tundra little more complicated to install than front by myself because you had to wedge between of tight access and old hitch receiver and frame. Although, once installed… worth every penny. Having camper attached to frame makes for less too heavy and more off-road capable. Drives fine in wind at 75mph

these fit my '21 toyota tundra perfect. It took a little bit to figure out the instructions but once we got one side, the other side went well. two of us installed front and rear mounts in a little over an hour. I had Torklift on my 2002 tundra and they were very secure for my slide in, that's why I got them again for my new truck.

these fit my '21 toyota tundra perfect. It took a little bit to figure out the instructions but once we got one side, the other side went well. two of us installed front and rear mounts in a little over an hour. I had Torklift on my 2002 tundra and they were very secure for my slide in, that's why I got them again for my new truck.

Fits fine on the 2020 Toyota Tundra. I would suggest one change, though. It is rather difficult stringing the bolt through with the coiled wire without losing it inside the frame before getting the nut on. Therefore, I squared the ends of the bolts, drilled a hole through the square end, and twisted the wire through the hole. This made it so I could easily pull the bolt through the hole and hold the bolt in place while sliding the nut and washer down the wire to the bolt and screwing it on it. Pretty much impossible to lose. The square end also made it easier to hold the bolt while tightening down the nut.

Rear tie downs for my 2001 tundra little more complicated to install than front by myself because you had to wedge between of tight access and old hitch receiver and frame. Although, once installed… worth every penny. Having camper attached to frame makes for less too heavy and more off-road capable. Drives fine in wind at 75mph

Extremely pleased and satisfied with the customer service I received. When there was a problem with getting my product they contacted me on Sunday and took care of all my needs. Thank you so much.

Fits well on a First Gen Tundra. I was extremely unsure about fitment for my truck but they work great! Install only takes 5-10 minutes. I would definitely recommend. Steel is quite thick and seems very strong.

Click to Enlarge

Click to Enlarge

Product are well made. Stronger than the bed side I think. They work well but my truck camper is heavy so when I can I'm going to get the frame mounting tie downs.

Product did not fit correctly need modifications spoke with TorkLift. They are looking into the problem. Very disappointing would not buy again.

I purchased the torklift kit for my 2008 Tundra. Fits nicely, with no major problems. Getting the nut with the handle and the bolt together through the brace took some ingenuity. Once that was solved the installation went well. I would recommend this product to others.

Product is very sturdy and easy to install. Fits 2005 Tundra.

Product is as advertised, and arrived in record time. Great retailer, great service. Thanks.

These tie downs worked great for my Toyota Tundra. I was securing a light weight camper.

Easy to put on they work perfectly very solid I have a 20-22 palomino SS 1251 truck camper Badland Edition doing a great job thank you a bunch

Click to Enlarge

Kit came early, installing it this weekend thanks to Brian for the prompt response on the emails

Waited a year to buy these. Torque lift true frame mounted truck camper "brackets" I had an unusual truck...Tundra 2015 longbed single cab.(somewhat rare). PERFECT FIT! The amazing part: ordered on tuesday TWO DAYS later there here! Thanks Etrailer, I will buy my next items (fastguns) anchor "binder" kit from etrailer soon . Thank you.

It does fit a 2021 tundra 8’ bed!!! 19 mm box wrench needed for installing Drivers side.

Great product, installed last night! Only suggestion I would have is info on the items page regarding install fitment. I was going back and forth in which model to get because unsure what hitch type I had. All my questions were answered once I opened the manual that came with the product and saw the picture! Would suggest including those pictures of the installed mount on the website.

very secure and super easy to install on my 2021 tundra. The front ones were a little tricky to install but also very secure.

the rear set also fot the 2021 Toyota Tundra CrewMax with minimal modifications. Nobody claims any fitment for these on the rear of a CrewMax, but i GUARANTEE it fits. Mine works great.

Fast, friendly service. Great quality

The hardest part of the installation was removing the frame bolts from the truck that are reused. The instructions were clear and easy to follow, and each piece fit perfectly where it was supposed to go. You don't need to be a mechanic to get these installed, but the proper tools are a must, along with a good chunk of an afternoon.

All parts arrived in good condition. The Torklift part you recommended was the exact fit, installation went well.

Rear tie downs for my 2001 tundra little more complicated to install than front by myself because you had to wedge between of tight access and old hitch receiver and frame. Although, once installed… worth every penny. Having camper attached to frame makes for less too heavy and more off-road capable. Drives fine in wind at 75mph

these fit my '21 toyota tundra perfect. It took a little bit to figure out the instructions but once we got one side, the other side went well. two of us installed front and rear mounts in a little over an hour. I had Torklift on my 2002 tundra and they were very secure for my slide in, that's why I got them again for my new truck.

Great product, installed last night! Only suggestion I would have is info on the items page regarding install fitment. I was going back and forth in which model to get because unsure what hitch type I had. All my questions were answered once I opened the manual that came with the product and saw the picture! Would suggest including those pictures of the installed mount on the website.

very secure and super easy to install on my 2021 tundra. The front ones were a little tricky to install but also very secure.

At the moment I have yet to install the tie-downs. However they arrives when etrailer stated and the boxes were in excellent condition. I expect to use them this weekend to pick up my new to me slide in truck camper.

Delivery came early and the box had all the parts . I still have to install the tie downs but seem pretty straightforward process

I put these on my F250 for when I carry my Northstar Camper and they have made an enormous difference, especially in sway. They work!

You should make the front angles a little longer for the top of the frame of the truck but thank you very much all done

I am extremely happy with this setup. Installation *could* be done by a single person, but would involve A LOT of figuring out special approaches to holding things in place for alignment and tightening. But I had a friend help me and installation went about as perfectly as one would hope for. I have used the oriduct for multiple trips, sone of which were on washboard gravel and dirt roads, and the setup has worked perfectly. My truck camper is a popup and pretty light, and the setup holds the camper in the truck very nicely. I suspect it would work very well even for heavier and larger truck campers, as well. I called support before ordering and was provided with perfect information in a very professional and caring manner. I am 100% satisfied, and highly recommend both this product and etrailer as a company.

I use this in A 2007 Silverado 1500 Classic with a 6.5-foot 1996 Lite Craft. Works great, and it was easy to install.

First of all, etrailer was amazingly communicative in the delivery process, which was greatly appreciated. And these tie downs were such a straight-forward installation. Start to finish, I would 100% buy from etrailer again! Highly recommend.

The tie down kit is very high quality, and the installation instructions were spot on. Our truck is in mint condition and I wanted a tie down system that was low profile, and did not take away from the looks of the truck when camper not on it. I've not used the turnbuckles yet, but they are set up ready for work and look great.