# 1
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen
Easy install works perfect
This was a super easy install, and the picture quality is outstanding. one piece of advice, if you are going to install more than 1 camera, go with the larger monitor, this one will be a tad bit small if I try to put 2-3 cams on it.
# 2
Furrion Vision S Wireless RV Backup Camera System w/ 3 Cameras - 5" Screen
Easy to install and pair. Theres a delay between camera and monitor !!!! The screen is way too small to have the 3 camera displayed. Not really easy to switch cameras while backing up. Would I recommend ti's product, for sure not !
Great customer satisfaction
# 3
Drive Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen
I had forgotten my account info and called customer service. They were fantastic. Was able to retrieve my business account and complete the order with no other issues. Thank You customer service for being very polite and patient with me.
Very clear image.
# 4
Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RVs - 7" Screen
THe camera was easy to install, pair and use. However, we got very inconsistent results while traveling. The camera would routinely disconnect from the receiver, search for a connection, reconnect, then disconnect once again. Having a rear camera on which you cannot depend is worse than having no camera at all.
Installation was a snap, works as it should. Installed on 2022 Coachmen Freedom Express 274RKS.
# 5
Voyager WiSight 2.0 Wireless Backup Camera System w Night Vision for Prewired RVs - 4.3" Screen
??
WHAT, a Great customer experience with the team of Etrailer. Will order more very soon. Thank you, Ashley, Gerorge, & William. The experience did not seem like cold order from the on line major stores. It was like a mom & pop caring about what I bought. Because, they owned it as their own!… Also, on the spot communication. Keep the care to the customers. LOVE Etrailer!!!
# 6
Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen
I installed this on my Airstream Bambi just above the license plate. Removed license plate light to expose light power wires. Drilled a large hole to fit the rubber grommet using a step drill, then drilled two small mounting screw holes using bracket as hole drill template. Fed the assembled camera connector through the large hole and pulled the camera connector wires out the license plate light wire hole. Solder camera connector wires to license plate light wires (confirm polarity) and stuffed all wires back into hole. Installed grommet and camera bracket sandwiching the grommet between the back of the camera bracket and trailer siding for a water proof seal. Camera paired first try. Be sure to power only the monitor on first, wait for screen prompt, then turn on camera using trailer lights. Camera image is crystal clear and I've not noticed any image lag. It's been great so far.
I installed this Voyager Wireless RV Back Up Camera on my new 2024 Flagstaff Lite TT RV about a year ago. The unit was straight forward to install and something I consider a must have for my RV Camping travels. This is the 4th Voyager Camera System I have installed over the last 20+ years of RV’g. I consider Voyager to be superior over any of their rivals and they and ETrailer can consider me a Delighted Customer.
# 7
Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen
Replaced my Airstream older camera with a newer version about a year ago. The wireless camera behaves better, and the monitor is bigger than the older version. Clarity is very good. Have noticed sometimes (like at night while raining), the color disappears, and it is just black and white. Not sure if an adjustment is needed to correct that.
After discussing my needs, etrailer suggested this unit and it is the perfect solution! It's very well constructed metal, rather than cheap plastic. Setup of the monitor was VERY easy with a step by step guide built in. The camera, on the other hand, did not have very clear instructions, but was easy to install. The camera can be powered by the reverse lights, the running lights or (in my case) powered directly to 12v (I used a 12v power outlet so I can unplug it). I have had people tail gate me in the "no zone" and then pass suddenly. I Don't have towing mirrors. It took a while to find the ideal spot for the monitor (I have a midsize pickup), but it fit perfectly to the left of the interior rear view mirror.
# 8
Rear View Safety Wireless Backup Camera System - 7" Quad View Display with Built-in DVR
The RVS-4CAM works very well and was easy to install both the camera and monitor. The only negative thing I noticed was that because the system is wireless there is sometimes signal loss at highway speeds which can be somewhat annoying. The product quality was outstanding compared to a cheaper no name brand that I had tried earlier for a different vendor. I highly recommend both the camera system and etrailer.
What our customers are saying:
"You folks are fast. Thank you very much."