Most Popular Overhang for 2021 Hyundai Kona

The only problem I had, was when I watched the video showing how to install the rack, I did not realize that the actual installation process was a lot more complex. For example, the woman who was in the video only showed the installation one rack (I believe itg was the back rack and she gave the width measurement for that one. The front rack was already on the car and the woman neglected to say, "check your manual. The width of the front rack (may be) different than the back. She also did not explain carefully that there were three different screws that needed to be adjusted for a proper fit so the towers were properly adjusted for yoiur specific car. (My car is a 2018 Chevy Volt.) (I also bought Yakima kayak cradles from you guys, which were easy to install.) However, I blame myself for not reading the manual carefully, so when I installed the racks, they did not fit right and one of them actually fell off while I was driving. (Luckily there were kayaks on and no one was hurt. The two towers were damaged but luckily the rack and the kayak cradles were fine. I called etrailers and was told I had to contact Yakima, which I did. I explained to the Yakima customer service rep that I was at fault for trusting the video and not reading the manual carefully and after asking me to send him photos of the damaged towers he sent me two new towers for free, as well as another torque wrench, so I could work with a second person. This time I read the manual carefully and watched the Yakima video many times during the a week before I felt confident enough to try installing the racks again. This time they fit perfectly. I love both the rack and the kayak cradles. I use them to transport my two kayaks down to the Hudson River near my house and have also used them to carry the kayaks to a family camping site 50 miles away, confident they are safe and secure. But please, review the video you put out for the installation of the racks onto a 2017 Chevy Volt, and either correct the shortcomings by doing it over, with an explanation about the adjustment of the widths, and also reading the manual and finding the correct positions for the adjustment screws. (Or delete it and refer your customers to the Yakima installation video. Though it’s more generic than yours, at least the tell the customer to refer to the manual.

Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts

Two issue- 1) my old Hull-a-ports don't fit perfectly on them. Had to do a little jerry rigging. It works, no problems but it would have been nice to know. 2) without any attachment on these bars, at speeds >40 MPH (70 KPH) These things cause the most God awful scream that almost precludes opening the windows they are so loud.

Great looking product. Fits very well on the car and the bars are actually pretty quiet. It is somewhat a pain to mount and dismount so plan on 30-45 minutes at least. In my opinion, if you put them on leave them there for the season as it is not very friendly to mount or dismount.

I ordered the Yakima roof rack, with the Hullyrollers for the back crossbar and the Mako saddles for the front crossbar to use with my kayak. It arrived just like they told me and I put them on my car the eveningit arrived. Got to finlly use the roof rack on June 22 to go out kayaking and it worked great. Only thing is I did not know about the air reflector piece for the front crossbar. Now I will be ordering it to help with the wind noise.

Great rack, go on fast, easy to install and work well on my VW TDI wagon. Care has to be given and follow the instructions for the install to what type of rails you have. Works great carrying the VW luggage carrier and plan on using it to carry kayaks as well. Just have not decided what kayak rack type to get yet.

Easy fit on Tesla Model X. Our fitment is for carrying kayaks and the occasional roof box. I would give these 5 stars if SeaSucker had the option to pivot the front mounts 90 degrees to decrease a sloping roof angle. The front mount placement is critical on a Model X as the front glass roof slope/curve means you'll definitely need to moisten the cups and press down firmly while suctioning to get a good fit. Another recommendation is to let the racks sit for 2-3 hours and then check the plungers to see if any have released air (clean and reposition if they have). Repeat the same dry fitment with your cargo attached.

The crossbars came together with all mounting hardware, platforms and legs. Evertyhing arrived together in short time and was raasonably easy to assemble. The quality is good and solid, and all at a good price. A year later, they still look great and perform well. I highly recommend purchasing from etrailer.

etrailer.com's videos and additional customer support made the purchase of a Rhino Rack system from them for our 2010 Malibu a no brainer. The rack fit the car perfectly, and with the videos and clear instructions that came with the kit, I got it installed on the car with only one misstep. The instructions came the the measurements in centimeters and inches. I didn't have a metric tape measure, and ended up messing up converting fractions to decimal. My Daughter is going to college 500 miles away and is moving into an unfurnished apartment and needed to pick up some small furniture that wouldn't fit in her Malibu. She purchased several items from Facebook Marketplace and was able to transport a twin bed and mattress, a medium sized desk and some dining room chairs (in several trips) with no problems. The only thing I can think of to improve the installation would be to have the Inches measurements in decimal or to include an inexpensive metric tape.

Excellent customer service. First set of crossbars was delivered to the wrong address and a second set was mailed out to us arriving in a week.

Fit perfectly and we're very happy with the roof rack.

We have been very happy with our Rhino Rack system atop our 2018 Chevy Express Van. We carry 2 Kayaks ( sit in style, 14 ft and 12 ft) upside down on the van roof and use some eye bolts and ladder supports with ratchet straps to hold them in place. It took a while to get them( due to being out of stock) but eTrailer has excellent customer service and kept in touch with us on the order status until they arrived.

Crossbars are true and straight. Work perfect for my application. Reliable product. Mounted solar panels to them.

These are the perfect racks for a low profile mounting of solar panels on my Sprinter van.

This works great. Very strong and reliable. Holds my ladders with ease. I’ve had it loaded down and done 80mph on the highway no problem.

Awesome rack and super easy to install. Great product and the only bike rack I could find that would fit my 2009 PT Cruiser. Awesome experience from start to finish! The product was shipped on the July 4 holiday weekend which is very much appreciated!

I was looking for a high quality roof rack for a naked roof. After much research I ended up with the SportRack #SR1005 with square steel crossbars. The rack fits well, the bars do not bend under weight of my canoe. Very solid, went fishing today!

The rack more than exceeded my expectations. It was easy to assemble and mount on the cap of my Tacoma truck. I was pleasantly surprised by the aerodynamics which virtually eliminate wind noise, even at highway speed. I pirchased the rack as a permanent mount for a 4rod flyrod holder which I use daily for fishing. The Rhino keeps everything “tight and right”. It has worked perfectly for nearly three hundred trips and over 15,000 miles this year.

The Rhino Rack HD crossbar kit for tracks fits my SyneticUSA Pro retractable cover perfectly. RR includes several track nuts of different sizes to match to your particular track. I love the quick detach capability of the towers and that they also lock for security. The HD bars are essentially the same dimension of 1 5/8" unistrut/superstrut so you can find all sorts of attachment hardware outside of what RR makes. This makes it easy to securely bolt your gear down to the cross bars and customize with easy to find hardware at your local home depot. The 65" HD bars are perfect for a mid size truck like my Tacoma.

Easy to assemble and, solidly built. Very easy/fast to mount/remove after assembly. The instructions are not all that clear for assembly of the combined sr1003 sr1116. I hope this photo will help. Note that the rubber feet remain on the back bar that crosses the car, but the hook that goes under the door frame is transferred to the sr1116 front to back extender bar.

The rack was fairly easy to put on, do NOT over tighten the rectangular nuts on assembly. They are easy to strip. There are now backup nuts on all four bolts on our unit. Be careful to assure that the rubber pads are correctly positioned on the unit's "feet" before tightening it down on your roof. It looks good and on a recent trip from CT to TN and back, we got the best fuel mileage we've gotten since we bought our CRV over a year ago so it sure doesn't create a lot of drag! Once mounted it is sturdy and not unattractive although the side clamps do distort the door gaskets a bit which increased the wind sound level a bit. I think it is a good value if you are careful mounting it.

Great product and easy installation. Much better than the Thule factory racks that came with the leer truck topper rail system. Also like how they can unlatch! I hauled a fishing kayak and a Yakima rod coffin case all the way from Florida to North Dakota. Racks are strong.

The rack is great. Well made with quality components, and compared to other brands, a very good value. I purchased the rack(s) to go on the top of a new Leer canopy with factory installed rails, supplied by Thule. The Rhine Rack cross bars are a great and less expensive alternative to other brands. My only complaint is that the Thule rails/tracks require the removal of end caps and mounting bolts to install the crossbar mounts, and that requires breaking the watertight sealing installed at the factory. That’s not the fault of Rhino Rack. However, if they could develop a mounting system (ZwifLoc?) that did not require access to the track from an open end, it would be SO much better!

Works perfect for our SUP with the tie down loops. Great for building materials as well. Looks great as well.

I ordered the Yakima roof rack for a 2019 Hyundai Ioniq. I went with the heavy duty one for extra strength but it is quite a bit thicker, likely increasing wind noise. So I might have chosen the aerodynamic lighter weight one if I was to do it again. Also, I needed to get larger bolts for my kayak holder to get around the crossbar. The instructions and video on website were very helpful but they did not explain well how to adjust the toe and pitch. For the toe adjustment, you have to push the metal post with the tool before tightening. That was not obvious. For the pitch, it helped to do that once the towers are attached to crossbar. Then you can tilt tower while cross bar is laying flat (upside down). I ended up having to add tilt on both front and back crossbars for them to be flat when installed. Website said only front one would need to be pitched. I am very pleased with the look and sturdiness of the product. My Hyundai Dealer had zero options for this car.

Product came in as ordered and worked great. Will definitely be back for future needs as Stacey in CS was very knowledgeable and friendly!

Bought the Thule Wingbar Evo 118 crossbars and Thule Evo Raised Rail footers and installed them on my 2016 RAV4. Pretty easy to install and I did watch a few videos online to make sure I was doing everything right. I like the new raised rail system from Thule as it is clamp style versus the rubber strap - both work very well, but the newer clamp system is nice because the tool you use to tighten the footings clicks when it reaches the right tightness so you don't over tighten it. I recommend these rails and the footings (Thule 710401) as the system is quiet when driving and looks good.

very solid rack, it's not going anywhere. Several fasteners to affix to truck cap. Clean look for the First Gen Tacoma (1999).

This is the second vehicle now that I've put the Rhino-Rack Aero Bar roof rack kit on. The instructions aren't too hard to follow with basic assembly knowledge and etrailer has a video tutorial for installation instruction which helped also. I didn't realize the allen wrench they provided also doubles as the security bolt bit you'll need when installing the brackets into the tracks so I just picked one up at the local hardware store. It's a great value for this product and I never had issues with my last kit and don't anticipate any with this one.

The crossbars don't make noise while driving and the aluminum bar itself is 50" not including the plastic end cap, unlike some other brands. Perfect size. The rubber strips are badly designed, though. One blew off in a thunderstorm. Etrailer was great about addressing the problem. Even though it wasn't covered under warranty they promptly sent new ones.

These bars are sturdy / strong and once installed look seamless, due to the underside cover strip