# 1
Pollak 6-Pole, Round Pin, Plastic Wiring Socket w/ Rubber Boot - Vehicle End
This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.
Decent enough plug. It was an easy install. I would have liked to have allen screws to get a good bite, but will check the connections after a use or two.
# 2
Pollak HD, 7-Pole Round Pin Connector w/Cable Guard
Great connector.
Plug arrived on time and as described. I replaced a farm implement electric plug and was better than the original!
# 3
Pollak 6 Pole to 4 Pole Connector Adapter
Exactly what I needed for my trike motorcycle. They knew exactly what I need to order . Quick delivery and very easy to talk with them for my needs
Excellent replacement for older adapter.Also,replaced the old worn out 6 pin connecter on the rv with a Pollak connector.
# 4
Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Socket - Metal - Vehicle End
Hi George, The adjusting star is too small & needs to be bigger - tools slip off easily - the groove is too shallow. They're wearing good.
Heavy built. Very much wish it had a cable clamp on the backside similar to its male equivalent. As it is all the strain on the wiring/cable is supported by the terminals themselves.
# 5
Pollak Trailer Connector Adapter - Vehicle End - 7-Pole Round to 7-Way Blade
Perfect adapter for pulling a hayride trailer!
I received this item in a plastic bag, for a few moments i wondered if it was a knock-off. I had done my home work and was sure that this item would be compatible with the socket on my John Deere 2013 5085M at the time I ordered it, not so. The 'holding ridge' at the plug-in end was not in the right position when fully inserted into the plug on the tractor. I sent multiple pictures to Pollack Technical Support but they were unable to assist me. I finally modified the item myself (something I really hate to do) so that it would fit the plug-in and be 'grasped' by the cover/holder on the tractor side. As I anticipated, the thickness of the plastic was inadequate to make the adaptation 'sweet', so I had to cover the resulting hole with silicone caulk.
# 6
Pollak 5-Pole, Round Pin Trailer Wiring Socket, Concealed Terminals - Chrome - Vehicle End
Always Professional Help here at Etrailer... !!!
as far as small 5 pin round plugs go, this one's better than others as the terminals are less likely to short against the housing like I've had before. I prefer the 5 flat myself but have two trailers for the bike both done this way, so I stayed with the round.
# 7
Pollak 7 Pole to 4 Way Connector Adapter
Plugs right into the 7 prong plug on the back of our motorhome and reduces it down to 4 wire plug.. all light functions work with our wireless magnetic lights !!
It works, it doesn’t have indicator lights so it doesn’t make my Rivian think I’m towing unless I actually am. The cap is difficult to remove as it’s recessed into the unit, overall it does the job.
# 8
Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Vehicle End
Excellent Quick Delivery When you are driving a Test or NASCAR Hauler you need replacement parts very quick, just like a pit stop. Thank You very much for the rapid delivery. Mint Moore III Ford Performance Race Hauler Driver
parts purchased from etrailer.com for my homemade cargo trailer
# 9
Pollak 5-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End
I have been very happy with products I have purchased from etrailer. On my last purchase the one of the trailer end connectors was missing the locking retainer screw. Otherwise i have been a very happy customer!
A similar trailer light connector was installed on my motorcycle cargo trailer when I purchased it way back in 2003. When I purchased my new Gold Wing in 2019, I wanted to use the same type of connector. Since I had to add a new female connector to the bike, I decided to renew the male connector on the trailer. I especially like this connector because it always stays secure when connected. I also wanted the connections to be out of sight when not in use. I have pulled my trailer with this new connection for over 2,500 miles and it has performed great.
# 10
Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Trailer End
The person who helped me find the correct part went above and beyond just taking my order and helping me find the correct part. Now I know why my dad suggested that I try etrailer to find the part I needed.
It’s nice to have an inexpensive replacement part rather than buying another whole harness!
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"