Most Popular Pollak for 2019 Subaru Impreza

Used on tow vehicle for hooking up wiring harness to motorhome

This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.

I bought this as part of a rewriting project for my 77 Airstream Tradewind. What can I say - it works and it was easy to install. I've never made one of these before but after following some instructions online my problems were all fixed and I had lights and brakes. FYI, if you are using this for a 77 Airstream like myself you will need to connect the wires from the tow vehicle to this connector according to color with three exceptions: The yellow wire from the tow vehicle goes to the black connector on this plug. The black wire from the tow vehicle goes to the blue connector on this plug. The blue wire from the tow vehicle goes to the yellow connector on this plug. If the above doesn't make sense to you now (like it didn't to me) it will make perfect sense once you have this item in your hand. One more note about my installation - I had two problems that I was trying to solve with this. The first is that I had an "SH" meaning a short circuit in my brake lines. This same error showed up no matter what tow vehicle or what brake controller was connected. The second problem is that my running lights would not work on my camper, however when you connected my camper to another tow vehicle using my old 7 pin plug the lights did work. Strange, but we verified that the problem was not in my tow vehicle so the only option would be this 7 pin connector was somehow not working correctly. For what it's worth, the running lights would work on a 1999 Suburban and a 1997 Tahoe, but would not work on my 2004 Suburban. Anyways, I figured that I would at least try to use this item to make a new connector before taking it in for service and lo and behold once I got everything hooked up it all worked perfectly (the brakes and all of the lights now work). I couldn't be happier.

We had a truck that had a male side of this particular plug. We also had a trailer that needed to be wired up with the female side. etrailer had the parts we were looking for. Purchase was easy and the part fit nicely. Wiring was simple we just printed the PDF file easily found online. We did have to do some simple trouble shooting as our old connector had a 5 wire system but we figured it out. We've bought other trailer items from etrailer and have always been happy with fast service and fair pricing.

Works really well.

This product wooks great. I will do business with this company again

I've got that trailer that has had one tough life. Yep, hundreds of gigs, PA and sound equipment rolling in and out, the heat, the cold, the sun, rain, and snow. Chicks, guitar players and drummers, you know, all the things that beat the hell out of a drum! Thank the music Gods for etrailer.com! The place to remedy the ills that trailers need in times of harsh environments, tough crowds, tin-ear'd musicians, and you ain't nothing but Hound Dogs!

I've never really liked Flat-4 type connectors. Unless you leave them dangling, they usually require that you crawl under the vehicle to connect them. (...Murphy's Law dictates that this will always be when it's raining or snowing). This Pollak 4-pole round socket, along with a Tow-Ready harness, and matching trailer connector, provides a neat, factory installed look, that's more convenient, and durable. My orders from etrailer arrived quickly, and with great seller communication. A+

Click to Enlarge

I received this item in a plastic bag, for a few moments i wondered if it was a knock-off. I had done my home work and was sure that this item would be compatible with the socket on my John Deere 2013 5085M at the time I ordered it, not so. The 'holding ridge' at the plug-in end was not in the right position when fully inserted into the plug on the tractor. I sent multiple pictures to Pollack Technical Support but they were unable to assist me. I finally modified the item myself (something I really hate to do) so that it would fit the plug-in and be 'grasped' by the cover/holder on the tractor side. As I anticipated, the thickness of the plastic was inadequate to make the adaptation 'sweet', so I had to cover the resulting hole with silicone caulk.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This is a great solution for adapting RV blade connector to 6 pole connector. I give it 5 stars. I use this for work purposes, and have found one issue that I DON'T believe to be manufacturer defect. In my industry we use different trucks and trailers daily, if not hourly. Some trailer electric brakes will lock up when adapter is connected. I have found the red wire in the adapter to be the problem. My solution was to splice in a switch so that when the intermittent problem arises I can flip the switch and be on my way.

The pins were too big by a little bit. Had to force the female plug into the socket

Nice product. Proper di-cast with chrome finish...not the cheapy plastic one this replaced. I prefer this to the flat-4 plug, because the flat-4 can't really be secured the the vehicle, and most of the time thay are run out the truck over the bumper. I didn't want to risk scuffing the painted bumper cover, plus I have a 3rd brake light on my trailer, which requires a dedicated brake light wire. I installed this on a 2006 WRX and a 1990 Mustang (1 trailer, 2 cars that tow it)

Click to Enlarge

I wanted one with a LED tester built into it to "trick" my SUV into thinking I had a trailer connected when really it was just a bike rack so the car didn't slam in it's brakes while reversing thinking it was something else. So I bought a different adapter. The picture slightly deceived me into thinking this had LED tester because the plug is attached by a rubber string (that I thought was a wire). So add another picture of the other side and that would eliminate my confusion. 4 stars because it probably works the way 99% of people would want to use it for.

Everything worked out well. On time and fits perfect. Attach hitch setup and my new Ridgeline. It comes with a 2" inch receiver and I have a full compliment of 1.25. stuff from my previous car. All from etrailer i must admit! so I needed the 2-1.25 reducer, a good lock, and the 7-4 reducer for my goodies! Thanks for the grest service

Click to Enlarge

Click to Enlarge

Excellent Quick Delivery When you are driving a Test or NASCAR Hauler you need replacement parts very quick, just like a pit stop. Thank You very much for the rapid delivery. Mint Moore III Ford Performance Race Hauler Driver

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

A great little heavy duty plug that I use to connect my car to the rv when towing 4 down.

Used on a pull behind motorcycle trailer so could go from receiving a 6 pin to a 5 pin. Wired it into loom so can use on more than one motorcycle. Works great. Glad to have found a place that even sold this product.

A similar trailer light connector was installed on my motorcycle cargo trailer when I purchased it way back in 2003. When I purchased my new Gold Wing in 2019, I wanted to use the same type of connector. Since I had to add a new female connector to the bike, I decided to renew the male connector on the trailer. I especially like this connector because it always stays secure when connected. I also wanted the connections to be out of sight when not in use. I have pulled my trailer with this new connection for over 2,500 miles and it has performed great.

Click to Enlarge

Quick shipping, will order from them again!

Exactly what I needed and It's a great fit