Summer Starts Here - Save up to 70%
# 1
Dexter Trailer Springs Over-Under Conversion Kit
Great kit! Installed this on my 1995 Jayco Fifth Wheel and it really improved the ride height with my truck. It’s been on 2 round trips from Texas to Montana since and many other trips locally with no issues.
Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.
# 2
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
I upgraded my leaf springs to 4000lbs springs and needed longer axle U bolts and Quinn at etrailer was helpful getting the correct bolts headed my way.
These seem to be working ok but do not appear to be designed for use with the HD upgraded Moryde greaseable shackle kit that I purchased with them . You can see in the photos that they rub and bind
# 3
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
Lifted an old 1985 Coleman Sequoia pop up camper with this and it worked great!!!
after one year axle is very very rusty as well as the hangers and hubs, not sure why but not happy with the price vs quality of product
# 4
Torflex Lift Kit - Tandem Axle - 3-1/8" Lift
Fair Price, fast shipping. Thanks etrailer!
Prior to installing this kit, I was unable to remove my tires without first deflating them. The same went for reinstallation. The kit works perfect and was easy to install. I'd recommend it for anyone needing to raise their trailer.
# 5
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
We broke down on a Saturday near Cincinnati and couldn't find any parts, so I called etrailer and luckily they had a wet bolt kit in stock. They shipped it next day, which means business day, next day, aka Tuesday " thanks UPS ". I had the kit installed by a mobile mechanic and I was back on the road by 3:30pm.
Had to replace the axles and decided while there, just do the whole suspension too. Got the axles directly from Dexter but purchased the suspension kit from etrailer. Replacing the equalizer was the easiest part of this project and if I didn't have to replace the axles, probably would have had it done in under 2 hours. Time will tell how well it rides and the tires wear.
# 6
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
Nice upgrade kit to replace worn parts on a 3 horse tandem axle trailer. Having the beefier shackle straps, bronze bushings, and ability to grease the moving points is a beautiful thing.
During my yearly maintenance i found a issue with 1 of my spring equilizers and all of my bushings were worn out "got my moneys worth out of them" etrailer sent this kit and it only took me 2 hrs to install and get back on the road
# 7
Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
Fair Price, fast shipping. Thanks etrailer!
The package arrived quickly as they said it would. I installed it as per the instructions and the job was easy. My Trail Lite Camper trailer has tandem axles so it was easy to just drive one set of axles up on ramps and install the lift kit on the hanging axle with the trailer hooked to the truck with the brakes locked on the truck. Anyhow, this lift kit was easy to install and did the job of raising the rear of the trailer from 14" to 18" after installation. Everything fit perfectly thanks to talking with Alex of etrailer.com and getting the right kit for my Dexter #10 Torflex axles. Attached are some pictures of before the install, during and after the install. I'm very satisfied. FYI the project goes a lot faster if you have an electric or pneumatic impact wrench to remove the old rusted mounting bolts and installing the new bolts.
# 8
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
Great price. Easy install. The trailer is quiet when the suspension is articulating around tight turns and going over speed bumps. And peace of mind knowing the worn out bushings are gone.
Customer service, response, shipping and ease of doing business are all top of class. The product is solid but kudos to the eTrailer staff for helping me out with a quality issue with one of the shackle assemblies. eTrailer has earned all my future business. It's great piece of mind to know they stand behind the products they sell.
# 9
Torflex Lift Kit - Single Axle - 2-5/8" Lift
Fair Price, fast shipping. Thanks etrailer!
Installed on a 2017 NuCamp Tag XL. Needed a little extra head room for the kitchen clamshell. Install was easy with basic tools, a couple jack stands, tape measure and some red loctite. Lift height is as claimed because it directly lifts the axle. Product has worked great, nothing has come loose or shifted. Stability towing has not changed. The only trouble is the wiring for the fender light is a little tight but that is a camper issue, no fault of the lift.
# 10
Torflex Lift Kit - Single Axle - 2-5/8" Lift
Fair Price, fast shipping. Thanks etrailer!
The trailer is a Palomino Solaire 147x. Installation was straightforward. The lift in combination with taller wheels and tires accomplished the desired ride height.
# 11
Torflex Lift Kit - Tandem Axle - 2-7/8" Lift
Fair Price, fast shipping. Thanks etrailer!
I think the lift kit is a very stout piece of hardware. I'll be installing it on Friday on an Airstream camper. Will give an update on how well it fits after the install. I gave 4 stars because the packaging could be better - almost lost some bolts or nuts. The delivery person had to tape it all up - must have fallen in travel and busted open.
# 12
Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
This kit (a dual kit) changed my view of Dexter as a quality-first manufacturer. etrailer simply sells it, they don't make it, so they aren't to blame. This kit is made specifically for mounting Dexter's General Duty 9,000 lb axles in tandem and is different from kits made for 3500 to 8000 lb axles. It provides extra axle tube to frame clearance to accommodate the 4" axle tubes used on their 9k and 10k GD axles. It uses beefy 7/8" equalizer pivot bolts and 5/8" spring eye bolts. So far, so good. Until you pay over $350 for it and receive a suspension kit with absolutely ZERO lubrication provisions! Seriously, Dexter?!! The bolts provided are all just grade 5 hardware store plain jane dry bolts. Not even grade 8. Dexter sells 7/8" greaseable "wet bolts" and even their lighter-duty hanger kits include greaseable wet bolts. But even if I paid etrailer the nearly $XX apiece they want for them (they're half that price elsewhere), there is literally no way of putting a square-shouldered carriage-style bolt, which they are, in the round roles this hanger kit was manufactured with without modification. As for the 5/8" spring eye bolts, only a great deal of internet searching will find any wet bolts the right diameter, and they'll be the wrong length. Those 4 bolts are about $20 each plus shipping. So, by the time I pay a machine shop to square the equalizer bracket holes on and buy all the wet bolts, or have them made, JUST so I can lubricate this expensive hanger kit in hopes of it lasting more than a very short time on a trailer that often grosses 20k, I'm going to have over $500 invested in it, not counting all the extra wasted down-time. This kit was supposed to solve my trailer suspension problems, not create more. FAIL!!
I purchased the 7 leaf sliper spring to replace my old ones. etrailer had all the parts needed to rebuild my trailer. The parts fit perfectly. The people there are very knowledgeable about the trailer parts and what is needed and what will fit when replacing old worn parts. I would stronly recomend etrailer for any of your trailer needs.
# 13
Dexter Trailer Springs Over-Under Conversion Kit
The lift worked out perfectly,I had the place where I bought the trailer install them because I didn't have a welder to weld the saddle mounts to the axle and that's a must for a safe installation,also I had the place where I bought the trailer do it because they had the capability to align the axle perfect to the trailer after the installation. The lift added approximately 5 inches to the trailer hight so I could install the off road wheels and tires.The lift didn't affect the handling of the trailer at all.
Jaime at ETrailer was extremely helpful and got my order sent up ups ground since I was having issues using a P.O. Box. My parts arrived quickly and fit perfectly. I installed them last week and my trailer looks so much better and won’t be scraping on my driveway anymore!
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."