Summer Starts Here - Save up to 70%
# 1
Curt Ball and Safety Chain Loop Kit for GM/Chevy/Ford/Nissan Underbed Gooseneck Trailer Hitch - 30K
Outstanding fast service. Product ordered was what was delivered,
etrailer Rocks, free shipping on orders over 99 dollars, and it’s not that cheap snell mail either!!! They shipped it UPS I received it it two days!!! Got the best price on the Net!!!!
# 2
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
I think this gooseneck hitch is the best for newer Sierra/Silverado HD trucks. I installed it a week ago with the help of my father-in-law and his car lift. Took about 4 hours moving slowly and taking our time. Everything fit well and bolted right up. I also reinstalled the foil heat shield after removing one mounting ear. I did not drop the exhaust or the plastic heat shield and still got everything in. I chose this specific kit because it did not require notching the bed seam when installing the rails. It also has a higher tongue load rating than the others and was cheaper. The only major criticism I have is the pull wire and carriage bolts. My chassis has weld nuts and I would have preferred to use those over carriage bolts pulled into the chassis. I am thankful there were access holes almost inline with the mounting holes. That made it easy to put pressure on the bolt heads so they didn’t fall back. I also think the gasket around the big hole should be one piece to make it look cleaner. I used black silicone rtv to smooth the transition and adhere the gasket in place. Overall I am completely satisfied with the kit and the help of Shawn B who got my order in, had it shipped that same day and followed up with me after delivery. Thanks etrailer and Shawn B.
I did the install myself on a 2019 GMC 2500 Short bed. I watched several videos before. I did not remove either mud shield or cut out/remove the heat shield. I chose not to install the chain holders since my Andersen Hitch has it's own tiedown bracket. My bed has a spray liner and therefore the edge covering would not fit the newly cut edges around the hole opening. So be sure to paint the exposed metal. In one of thg he videos a tech use a predrilled board as a guide during the drilling of the bed hole. This was a great idea. Since I chose to keep the heat shield installed I had to lift the main unit into place by sliding it up between the gas tank and rear differential unit. I think it would have been very helpful to have a tools required list before I started. Also, the tip about cleaning out the powdercoated threads was very good idea. Preptime, tapping threads, install and cleanup (tool put away) was over 6hrs....and I skipped a lot of disassembling a n.v d reassemble steps. Everything was straight forward and understandable. A lift would have been great but I used rear ramps which was enough. Make sure you get a step ladder for bed entry now. I expect it to work as expected. Seems very solid!
# 3
Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch - 32,500 lbs
The install was slightly more difficult on this curt hitch than the BW hitch, but this one was on sale at the time so I chose to give this one a try. Both styles give you a little workout but the hardware package is easier to work with on the BW hitch
# 4
Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
2021 Sierra 2500 standard box. Item arrived pretty quick with all parts included and no damage. Instructions for the install are, in my opinion, not very detailed and left me having to figure several things out on my own. Biggest pain was having to drop the fuel tank a few inches to access the hole in the driver-side frame rail to fish wire the one bolt for the side plate. Unsure why this info was missing as I would imagine anyone installing this on the same truck would have the same issue of not having enough clearance for the fish wire procedure. The front and rear rails are 0.25” in length different and are not labeled - be prepared to measure and appropriately install in the correct position with the holes closer to the bottom (this is poorly referenced in the instructions and leaves additional room for error and time). The install took me about 7 hours (no help). Finished product is nice and sturdy. The ball ends up being about 4-5” forward the rear axle. I tried to find this info prior to purchasing, but could not. I use an extang hard tri-fold tonneau cover that does not flip fully up toward the cab and was concerned I would have to remove each time I hooked up a gooseneck. It appears that I will have to remove for most applications due to clearance issues, so less than ideal. Operates as intended and should bring many years of trouble free service.
Accurate install directions, fantastic fit and operates perfectly for my 5th wheel RV
# 5
Curt Ball and Safety Chain Loop Kit for Chevy, Ford, GMC, and Nissan Underbed Gooseneck Hitch - 38K
Drops right in to go to work
Thanks for your help!
# 6
Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails, 25,000 lbs GTW
Easy to put in and take out. Isn't much noise or banging I would recommend it to anyone
Very fast shipping, great price!
# 7
Curt Overbed, Folding Ball Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Etrailer is awesome, not so much for this product. My first and primary issue is that the safety chain u-bolts are positioned to close to the angle iron brackets to allow clearance for them to freely move up and down with the nuts installed (see photos). I can force them up from below with a hammer and stomped them back down from above. This problem is made worse due to the proximity to the ball, if I dont ensure they arent stomped down as much as possible they would interfere with my coupler when turning. I'm honestly still worried about interference if I find myself in any off camber turn. The other problem I have isnt the fault of the hitch, but now that its installed it is still much more intrusive to the bed space when folded flat than I anticipated. In the past I've had under bed mount balls, this being a work truck I thought the cheaper option would work but I regret that decision.
Etrailer has always come through . Even if there is an issue they respond quickly and that means alot . The prices are the best .
# 8
Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
2021 Sierra 2500 standard box. Item arrived pretty quick with all parts included and no damage. Instructions for the install are, in my opinion, not very detailed and left me having to figure several things out on my own. Biggest pain was having to drop the fuel tank a few inches to access the hole in the driver-side frame rail to fish wire the one bolt for the side plate. Unsure why this info was missing as I would imagine anyone installing this on the same truck would have the same issue of not having enough clearance for the fish wire procedure. The front and rear rails are 0.25” in length different and are not labeled - be prepared to measure and appropriately install in the correct position with the holes closer to the bottom (this is poorly referenced in the instructions and leaves additional room for error and time). The install took me about 7 hours (no help). Finished product is nice and sturdy. The ball ends up being about 4-5” forward the rear axle. I tried to find this info prior to purchasing, but could not. I use an extang hard tri-fold tonneau cover that does not flip fully up toward the cab and was concerned I would have to remove each time I hooked up a gooseneck. It appears that I will have to remove for most applications due to clearance issues, so less than ideal. Operates as intended and should bring many years of trouble free service.
Have not attempted install yet but looks well made and straight fowrard instructions
# 9
Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch - 30K
Outstanding fast service. Product ordered was what was delivered,
etrailer Rocks, free shipping on orders over 99 dollars, and it’s not that cheap snell mail either!!! They shipped it UPS I received it it two days!!! Got the best price on the Net!!!!
# 10
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
I think this gooseneck hitch is the best for newer Sierra/Silverado HD trucks. I installed it a week ago with the help of my father-in-law and his car lift. Took about 4 hours moving slowly and taking our time. Everything fit well and bolted right up. I also reinstalled the foil heat shield after removing one mounting ear. I did not drop the exhaust or the plastic heat shield and still got everything in. I chose this specific kit because it did not require notching the bed seam when installing the rails. It also has a higher tongue load rating than the others and was cheaper. The only major criticism I have is the pull wire and carriage bolts. My chassis has weld nuts and I would have preferred to use those over carriage bolts pulled into the chassis. I am thankful there were access holes almost inline with the mounting holes. That made it easy to put pressure on the bolt heads so they didn’t fall back. I also think the gasket around the big hole should be one piece to make it look cleaner. I used black silicone rtv to smooth the transition and adhere the gasket in place. Overall I am completely satisfied with the kit and the help of Shawn B who got my order in, had it shipped that same day and followed up with me after delivery. Thanks etrailer and Shawn B.
I did the install myself on a 2019 GMC 2500 Short bed. I watched several videos before. I did not remove either mud shield or cut out/remove the heat shield. I chose not to install the chain holders since my Andersen Hitch has it's own tiedown bracket. My bed has a spray liner and therefore the edge covering would not fit the newly cut edges around the hole opening. So be sure to paint the exposed metal. In one of thg he videos a tech use a predrilled board as a guide during the drilling of the bed hole. This was a great idea. Since I chose to keep the heat shield installed I had to lift the main unit into place by sliding it up between the gas tank and rear differential unit. I think it would have been very helpful to have a tools required list before I started. Also, the tip about cleaning out the powdercoated threads was very good idea. Preptime, tapping threads, install and cleanup (tool put away) was over 6hrs....and I skipped a lot of disassembling a n.v d reassemble steps. Everything was straight forward and understandable. A lift would have been great but I used rear ramps which was enough. Make sure you get a step ladder for bed entry now. I expect it to work as expected. Seems very solid!
# 11
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
I think this gooseneck hitch is the best for newer Sierra/Silverado HD trucks. I installed it a week ago with the help of my father-in-law and his car lift. Took about 4 hours moving slowly and taking our time. Everything fit well and bolted right up. I also reinstalled the foil heat shield after removing one mounting ear. I did not drop the exhaust or the plastic heat shield and still got everything in. I chose this specific kit because it did not require notching the bed seam when installing the rails. It also has a higher tongue load rating than the others and was cheaper. The only major criticism I have is the pull wire and carriage bolts. My chassis has weld nuts and I would have preferred to use those over carriage bolts pulled into the chassis. I am thankful there were access holes almost inline with the mounting holes. That made it easy to put pressure on the bolt heads so they didn’t fall back. I also think the gasket around the big hole should be one piece to make it look cleaner. I used black silicone rtv to smooth the transition and adhere the gasket in place. Overall I am completely satisfied with the kit and the help of Shawn B who got my order in, had it shipped that same day and followed up with me after delivery. Thanks etrailer and Shawn B.
I did the install myself on a 2019 GMC 2500 Short bed. I watched several videos before. I did not remove either mud shield or cut out/remove the heat shield. I chose not to install the chain holders since my Andersen Hitch has it's own tiedown bracket. My bed has a spray liner and therefore the edge covering would not fit the newly cut edges around the hole opening. So be sure to paint the exposed metal. In one of thg he videos a tech use a predrilled board as a guide during the drilling of the bed hole. This was a great idea. Since I chose to keep the heat shield installed I had to lift the main unit into place by sliding it up between the gas tank and rear differential unit. I think it would have been very helpful to have a tools required list before I started. Also, the tip about cleaning out the powdercoated threads was very good idea. Preptime, tapping threads, install and cleanup (tool put away) was over 6hrs....and I skipped a lot of disassembling a n.v d reassemble steps. Everything was straight forward and understandable. A lift would have been great but I used rear ramps which was enough. Make sure you get a step ladder for bed entry now. I expect it to work as expected. Seems very solid!
# 12
Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails - 30,000 lbs
I was very impressed how fast they got my order out and got it to me. Everything was exact how I needed it and wanted it and very thankful that they got it to me within The time they said
Easy to put in and take out. Isn't much noise or banging I would recommend it to anyone
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"