Most Popular No-Drill Install for 2015 Ford F-150

Front and back Weathertech mud flaps fit like a glove on my 2013 Ford F-150. About a 25 minute install and all four were on even without using instructions. (Man Thing ;~) Difficult part was getting plastic plugs out of rear lower fender well. Think they look great but you be the judge as I've attached a pic.

Bought 2 sets of these, one for a 2013 Ford F150 and one for a 2014 F150. The price was the best that I found and the flaps went on really easy. It took me only 15 minutes to put the second set on. They looked liked a factory accessory on the trucks.The free shipping on orders over $99 was a plus. The delivery was quick, actually got them a day earlier than I expected. I have already looked at some other things that I intend to buy from etrailer after my hunting trip is over. Etrailer kept me in the loop by letting me know when the items were shipped and when they would be delivered. Great job and service from etrailer!

Received package very quickly. The Weather Tech mud flaps mounted perfectly on my new F-150 Super Crew.. no problems. Instructions were clear and accurate. Could not have been easier! Again, thanks for a great product and great shipping. John

Quality product. Installed easily and looks great . Extremely well secured in shipping box . Delivery was prompt, even though I did regular shipping.

Easy to install and remove.

I recently added a 6-inch lift and larger tires to my truck. The tires stick out approximately one inch outside of the wheel well. This immediately increased the amount of rocks I was slinging every time I pulled out of my 400-yard-long gravel driveway. We bought a travel trailer and the last thing I wanted to do was sling rocks at it non-stop or take the chance of busting a window. We all know how high the RV tech labor rates are. I opted for this product to prevent a more expensive issue down the road. The pros: They work as you'd expect them to. They are adjustable, both in height and width. You can shorten the actual flaps by cutting them and a hole punch is provided to create new bolt holes. They are easily removed when not in use. The cons: Whoever wrote the directions may have been half asleep. In one step they'd say do something one way, then the next step another way. Super confusing but most of us can figure out how to install them. The flaps are not attractive to the eye but they get the job done. They are overpriced but I convinced myself to purchase them by knowing if it saves one puncture to the front hull of my camper or one busted window, they've paid for themselves. I'd buy them again, even though I'd still mumble under my breath how much they are overpriced.

Super easy to install and it took about half an hour. Look good after a year and are still solid. Id buy them again.

Delivery from etrailer was unbelievable fast. Rear mud flap installation for me was more difficult than the front ones. Fronts fit better too but all 4 look good on my 2020 Ford F-150 XLT Special Edition with 20 inch factory wheels. No rubbing or scraping on the front.

At first I thought these mudflaps were a little pricey but they fit and install exactly as advertised which is a major plus. They are sturdy and well constructed so the price wasn’t too far out of line. And I highly recommend this product.

Good solid fit. My running boards are closers than 2" to wheel well and these fit fine. They come with screws you can drill into the plastic and make the mount stronger on the front.

Hex or Torx headed fasteners would be a real improvement over the supplied Phillips ones. The fasteners were a bit short also. I replaced the Phillips headed fasteners with longer 1/4 inch hex headed ones.

Installed the rear mud flaps on my 2012 F150, literally took 10 minutes. They appear to be very well made and fit is excellent. Planning to buy a set for the front next.

My initial order was placed in error when I transposed a number. However, the service to exchange the item and receive the correct model was excellent and very timely! Great customer-based company and my after-market parts fit like a glove!!! Thanks so much!!!

The WeatherTech FIT My F150 PERFECTLY. Literally 10min to install. This product MADE IN USA, makes me PROUD to enhance my truck with AMERICAN INGENUITY.

The mud flaps were easy to install and work well.

Fit as described. Easy to install. They have held up thru harsh winter conditions. I'd recommended these to anyone.

I love them Richard

Received fast and product was easy to install.

No problem work great

Items was delivered on time. Fits my 2016 F-150 perfectly. Great quality!

Excellent product. Easy to install and works great

The product did what I wanted it to do. It kept stones and debris from hitting the camper. However, when you cut the flap to a height that is compatible to a good running height ( 4" above the road) the flap drags going in and out of parking lots. On one trip it drug so often the flap had a tear at the mounting bracket. I sent an email asking if I could purchase just the flap but I got no response. So I improvised and put another metal bracket joining both sections of the flap.

Very easy to install and looks great. I shimmed my receiver hitch to ensure it did not wobbel. Protects my fifth wheel from gravel and road debris.

Rears fit well. Front rubs tires when turning.

Easy to install, too bad they don't have front one for no running boards

product installed easy and has held up well

These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.

Great service item was shipped and received quickly. Mud flaps were easy to install.

Thanks everything was great . Russell

Super easy to install. They look and fit great.

The mud flaps are high quality they fit and look great

Received my products fast as usual. Reviewed the instructions that came with them and must say they are very clear, to the point and easy to understand. Love doing business with eTrailer!

This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.

2024 F350 Crew, Rear mud flaps are easy to install and work good. Front mud flaps need some additional longer screws to replace Ford screws. With an inner wheel well liner backed up with a carpet of some type the original screws make it near impossible to catch the metal clip on the carpet because of the mud flap additional thickness.

I installed a complete set of flaps on my 2013 Suburban. The flpas were fairly easy to install, but for my SUV they do not use the clips that many pictures illustrate. The factory hardware will hold it in place, but I strongly suggest that you drill the additional hole for the inside edge of the flap and secure it with the additional bolts provided. With 17" wheels the clearance is tight and that additional bolt will assure that when you turn the wheels lock-to-lock it will not pull the flap out from the liner to which it is attached on the inside.

Well first of all Weather Tech is a popular brand a little pricey my belief in life is you want something to last pay a little more. Recieved mine today beautiful. Have not had a chance to put. them on rainy hard.

These mud flaps are a perfect fit for on my 2024 Ram 2500 Power Wagon and Rebel Trucks and look fantastic. No-Drilling or modification needed, just remove the factory screws and install the mud flaps using the 3 removed screws.

Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.