# 1
B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs
I decided to buy the Champion fifth wheel hitch to pull a fifth wheel camper, my 2004 Dodge Ram 2500 already had a B&W goose neck hitch in it. The champion hitch allowed me to also have a fifth wheel hitch with out drilling and mounting more weight to the truck. The instructions for assembly were clear and easy to follow making the assembly of the hitch easy. The hitch fit snug and there is no play in it. The 26' fifth wheel camper pulled nicely, no surging or swaying.
Awesome product. Best of both fifth and goose put together about time. No annoying rails on my trucks bed, just remove fifth wheel flip gosse over and hides in hole within minutes. 2016 350 Ram. 38' 5R no problem nice setup.
# 2
Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter w/ Offset - 12" to 16" Tall
This hitch adapter is heavy duty. It's easy for two people to install in under an hour and all parts fit together well. The instructions were well written in English, which is the official language of our country (USA). The offset adapter works great with my 2011 Ram 2500 4x4 which sits higher due to oversized tires. My shipment was received two days after I ordered it without paying any expedited freight charges! Thanks to the Convert-A-Ball and the fine folks at etrailer.com my days of listening to a clanging 5th wheel hitch are over. Thank you etrailer.
Easy Hook Up - No 5th Wheel Saddle to remove when you want the bed of your truck back for other use, you simply flip your goose neck ball over - very stable on the road even in High Wind situations - with 8" offset it gives you extra turning radius with the Cab of the Truck - doesn't bind when you are backed into low or high spot, which happens with the King Pin of lower cost fifth wheel hitches - ininstallation instructions were very Good
# 3
Curt X5 5th Wheel Base Rails Adapter for B&W Turnoverball Gooseneck Trailer Hitches - 20,000 lbs
It is a great investment. I did not want to put the rails in my truck and this was the answer to utilize my gooseneck set up for my fifth wheel. It also provides a lot of room in the bed of my truck
It does what it's supposed to
# 4
Bulldog Gooseneck-to-5th-Wheel Trailer Coupler Adapter - Inner Tube - Square - 30,000 lbs
Needs bigger plate for my use. but overall works fine
awesome fast service perfect product, took care of the rocking i had in the trailer as a goose neck.
# 5
Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter w/8" Offset for Short-Bed Trucks
Hitch is great and a breeze to install. I cant say enough about the service I received from etrailer. I ordered the wrong hitch (my fault) so I called etrailer they immediately sent me a return authorization and shipped me the correct hitch. They shipped the replacement hitch on Thursday morning I received it Friday. Thats awesome. Thanks etrailer.
order came in on time. just one hour to install. with help from friends. so far its going well. adjusted height. looks good. can't wait to get on the road. great company
# 6
B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs
Perfect set up for my ram megacab short bed. Tows quiet never had any rattling and the slider definitely helps in tight situations.
I decided to buy the Champion fifth wheel hitch to pull a fifth wheel camper, my 2004 Dodge Ram 2500 already had a B&W goose neck hitch in it. The champion hitch allowed me to also have a fifth wheel hitch with out drilling and mounting more weight to the truck. The instructions for assembly were clear and easy to follow making the assembly of the hitch easy. The hitch fit snug and there is no play in it. The 26' fifth wheel camper pulled nicely, no surging or swaying.
# 7
Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter - Single Jaw - 21,000 lbs
The Demco Recon is easy to set up on my B&W turn-over ball gooseneck hitch. I went with this combination since the Demco Recon is not as heavy as the B&W Companion so I can remove the 5th wheel setup by myself. The Demco is a quality constructed product that I am looking forward to may years of service with. The only recommendation I would have is to have the torque specs for the ball capture pin and the plate yoke bolts on the unit. I just wrote the specs on the unit in silver Sharpie so I would not need to look it up every time. Installed in a 2014 Ram Mega Cab diesel 4x4 which leaves enough room for an RDS 80 gallon aux fuel tank at the front of the bed.
The hitch is easy to ensemble. Great design. Pulled my trailer great! But when I hooked up the second time to the trailer the roll pin that goes in the locking bar fell out. Wasn't a really big deal. But if I hadn't had any tools and a 1/4" bolt with a lock nut I probably won't have been able to hook up. Maybe they could change that. The best adapter from gooseneck to fifth wheel.But all in all very happy with it.
# 8
B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 25,000 lbs
I decided to buy the Champion fifth wheel hitch to pull a fifth wheel camper, my 2004 Dodge Ram 2500 already had a B&W goose neck hitch in it. The champion hitch allowed me to also have a fifth wheel hitch with out drilling and mounting more weight to the truck. The instructions for assembly were clear and easy to follow making the assembly of the hitch easy. The hitch fit snug and there is no play in it. The 26' fifth wheel camper pulled nicely, no surging or swaying.
Awesome product. Best of both fifth and goose put together about time. No annoying rails on my trucks bed, just remove fifth wheel flip gosse over and hides in hole within minutes. 2016 350 Ram. 38' 5R no problem nice setup.
# 9
Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter
Installed in about ten minutes, ( I used a bearing puller to seat the bushings ) five minutes to tack weld it into place and done. Pulls better than a fifth wheel hitch IMO. Seems to be made very well. Took two days for deliver. Very satisfied
I returned it, because it was going to change the structural integrity of my 5th wheel camper. Did not use the product.
# 10
Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball - Single Jaw - 21,000 lbs
Put this setup on a 2021 pj flatbed with a recessed gooseneck (believe it's a b&m 30k kit) in it from the factory. The top of the ball is about 1/8"-3/16" lower than the deck. Took a few tries to make everything fit along with some modifications to the set screws. I had to trim off about 1/4" on the bottom set screw to clear my opening. Also I can't set the 5th wheel height to the lowest setting because the upright casting sticks out the bottom of the frame. One could trim that off as well but then you lose the hole for the highest setting. Gonna run in the middle setting and if I have to, I'll trim off the excess to make it sit lower. Bed is on a 2014 Ram 4500. Top of bed to ground with no load is 41.5" at the rear axle. Overall looks like it will work for what I'm doing.
The Demco Recon is easy to set up on my B&W turn-over ball gooseneck hitch. I went with this combination since the Demco Recon is not as heavy as the B&W Companion so I can remove the 5th wheel setup by myself. The Demco is a quality constructed product that I am looking forward to may years of service with. The only recommendation I would have is to have the torque specs for the ball capture pin and the plate yoke bolts on the unit. I just wrote the specs on the unit in silver Sharpie so I would not need to look it up every time. Installed in a 2014 Ram Mega Cab diesel 4x4 which leaves enough room for an RDS 80 gallon aux fuel tank at the front of the bed.
# 11
Gooseneck to 5th Wheel Trailer Coupler Adapter - Inner Tube - Round - 25K lbs
Makes for a more stable hitch with the Ram Puck System, don't hear of feel the gooseneck down pipe flexing, makes hooking up easier in that I don't have to get up into the bed to close and lock the gooseneck lock. Yeah, glad I went this way. Easy install.
I always order these for my trailers and have always got a good working functional products with free shipping can't beat the price or quality a+++
# 12
Demco 5th Wheel Base Rails Adapter for B&W Turnoverball Gooseneck Hitches
This hitch mount is great! I can now swap over from my 5th wheel hitch to a gooseneck in minutes. This is a great product. I had a gooseneck hitch already installed in my pick up but needed to tow my 29 foot 5th wheel. I other mounts to install the 5the wheel to my 2013 Ram but the gooseneck hitch mount was in the way. Found this set up on line at etrailer.com . Fast shipping, Ez to get my order in. 100 % satisfied. Plug and play. Took less than 10 minutes to install.
This product worked great. Used it in a 2016 Ram 2500 4x4 with the B&W turnover ball. The only problem is the safety chains for the B&W wont let this set flat against the bed of the truck. I solved this problem by using a heavy duty 1/4 inch rubber bed mat between the bed and this bracket and cut the rubber around the B&W hole and safety chains. That helped take up the extra space and helped to protect the spray in bed liner from being rubbed. Had no problems towing my fifth wheel and was happy I don't have these rails permanently mounted in my truck bed.
# 13
Gooseneck to 5th Wheel Trailer Coupler Adapter - Inner Tube - Square - 25,000 lbs
Ordering was quick and easy. Product does what it is supposed to do. Shipping was fast.
Makes for a more stable hitch with the Ram Puck System, don't hear of feel the gooseneck down pipe flexing, makes hooking up easier in that I don't have to get up into the bed to close and lock the gooseneck lock. Yeah, glad I went this way. Easy install.
# 14
Ram Gooseneck to 5th Wheel Trailer Coupler Adapter Inner Tube - Square - 30,000 lbs
Makes for a more stable hitch with the Ram Puck System, don't hear of feel the gooseneck down pipe flexing, makes hooking up easier in that I don't have to get up into the bed to close and lock the gooseneck lock. Yeah, glad I went this way. Easy install.
I always order these for my trailers and have always got a good working functional products with free shipping can't beat the price or quality a+++
# 15
Curt X5 5th Wheel Base Rails Adapter for Curt Double Lock Gooseneck Trailer Hitches - 20,000 lbs
Fits perfectly into curt goose neck hitch. My reese 5th wheel hitch fits on the rails perfect. I haul dirt bikes in my truck so being able to take the rails out is perfect..... nothing in the way of loading or unloading
Fits a little loose but all in all ez install great solution to utilize all Towing capabilities
# 16
Gooseneck to 5th Wheel Trailer Coupler Adapter - Round - 30K
Excellent workmanship. Ordered another one for my other trailer.
Great product and works as intended.
# 17
Ram Gooseneck to 5th Wheel Trailer Coupler Adapter - Round - 25,000 lbs
Super great customer service and exactly the product I needed for a specific trailer to truck connection I was looking for at a very competitive price!! Thanks, Mark Clark
Makes for a more stable hitch with the Ram Puck System, don't hear of feel the gooseneck down pipe flexing, makes hooking up easier in that I don't have to get up into the bed to close and lock the gooseneck lock. Yeah, glad I went this way. Easy install.
# 18
Ram Gooseneck to 5th Wheel Trailer Coupler Adapter - Round - 30,000 lbs
Makes for a more stable hitch with the Ram Puck System, don't hear of feel the gooseneck down pipe flexing, makes hooking up easier in that I don't have to get up into the bed to close and lock the gooseneck lock. Yeah, glad I went this way. Easy install.
I always order these for my trailers and have always got a good working functional products with free shipping can't beat the price or quality a+++
# 19
Curt X5 5th-Wheel Base Rail Adapter Plate for EZr Double Lock Gooseneck Trailer Hitch
Fits perfectly into curt goose neck hitch. My reese 5th wheel hitch fits on the rails perfect. I haul dirt bikes in my truck so being able to take the rails out is perfect..... nothing in the way of loading or unloading
Fits a little loose but all in all ez install great solution to utilize all Towing capabilities
# 20
Bulldog Gooseneck-to-5th-Wheel Trailer Coupler Adapter - Square - 30,000 lbs
Needs bigger plate for my use. but overall works fine
Upon receiving the product the plate is welded to the tube is crooked. So when it's mounted it's looks bad.
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"