Most Popular Over-Cab Height for 2013 GMC Sierra

No fault of eTrailer - the service was exceptional. It's a great ladder rack - my only issue is that the threads needed to be chased out with a tap to avoid cross threading, which i guess is some feedback for the manufacturer. Looks great on a 2024 Sierra.

Best rack on the market, and I’ve owned many! This is my second set of TracRac ladder rack systems. The first in 2006, and it was still going strong until I sold the truck with the rack on it, and now this one I purchased in 2022. Unfortunately, this will be my last one as it will take me into retirement, but it will live on with the new owner that buys this truck! Thank you for manufacturing such a good quality product. A+++++

This is a great product. Simple to install and remove. Although it does not work with tonneau covers which I wish it does, I do like the design. The cost of this product is much cheaper that other manufacturers. It is built solid and its aluminum construction makes it light. I used this for hauling my 14' canoe for our camping trips.

I GOT MY TRUCK RACK IN 3 DAYS, I ASSEMBLED IT AND INSTALLED IT ON MY TRUCK,LOOKS GREAT, VERY STRONG, I AM GOING TO LIKE THIS PRODUCT VERY MUCH, THANKS AGAIN

Great product exactly what I needed. Would definitely recommend. 100% satisfied with e.trailer very fast shipping!

Fantastic experience from ordering to receiving my new Thule Trac Rac system. My package was delivered quickly and without any damage. The installation instructions were clear and simple to follow. I’m very happy with my new rack system

I did install the Thule TracRac SR. I did it on my own and it went well. I'm really pleased with it. As for the photo, I will send you one, once I've washed my truck. Can't make a photo with a dirty truck. I will leave feedback later after some time with the rack.

Excellent rack. I've using these racks for about 15 years.

It's a nice rack, sturdy and well thought out. However, the statement that it will fit a 2024 Toyota Tacoma is misleading. I did get it to fit, but it took a weekend of altering and fabricating parts. This is more a problem of the design of the truck than of the rack. The J-bolts are useless for this application. I had to unbolt the silly little plastic strip under the plastic rail on the truck and replace that with angle iron, then cut the rack's feet and re-weld some of the the round thingees where the J bolts would have gone through if the truck was built differently. Another option would be to drill and tap the metal rails under the plastic rails, but who wants to drill into a brand new truck? The etrailer people were super helpful but the Erickson people were not helpful at all.

Should work fine as intended. It is a bear to assemble. Tons of bolts I am worried will loosen over time. Just installed it today. Let’s see how it goes.

Delivery was fast as usual. The installation does take a couple hours and is much easier with a second set of hands. I have a drop in bed liner on my F150 so I did have to do some cutting but my oscillating tool made that a quick modification. Make sure to use the no seize on the bolts so they don't heat up when cranking them into place. Lastly, there are NO drain holes in the bottom of the tubes and believe me they do fill with water and ice in cold temps. I drilled two 1/2 in. holes in the sides at the bottom so they can drain but if I realized there were no weep holes I would have drilled a hole in the bottom of each before installation. After drilling the hole, make sure to coat with a primer and some paint to prevent rusting. Other than what I encountered they will serve their purpose and seem good overall.

I’ve been using this ladder rack for a year now and it has stood the test of time. I love the ability to remove the arms when I’m not using them so my tonneau cover can be closed. Highly recommended for the occasional need for a tough ladder rack.

This is a high quality product. The parts are all well made, and most everything is either stainless or aluminum, so it should last a long time. I bought it because my Kargo Master Pro-II was rusting up badly in only about eight years. Assembly isn't easy. Takes lots of time to get the rails level and evenly spaced, needs to be near perfect for the uprights to slide easily. And, there are just a lot of parts to put together. Assembly took a little longer because the instructions didn't match the kit in one area. The manual tells you to pre-assemble a bunch of fasteners, but then you realize that your parts don't have slots, like the instructions expect, but rather holes instead. So, the parts needed to be unassembled, then reassembled again, this time through the holes. No biggie, but it added to the time necessary. Be nice if the clips up on top could be easily removed when not in use. They look strange, and add height to your truck. I only ordered two of the tie-downs with the rack, should have ordered four so that shipping would be free. They are expensive, but nice. They didn't suggest it in the manual, but I think it would be a good idea to use anti-sieze on the hardware, I'm a little worried about galling down the road when disassembly is necessary. Stainless is prone to do that. In summary, though, this is a dang nice rack! I don't regret the purchase at all.

I have been planning to buy these for years. Now that I finally bit the bullet, I'm quite happy with the product. Installation was simple and straight forward and the flexibility of the rack is great. At first I had hoped to reuse an old rack that I bought on CL with new base rails and cantilever extension from etrailer. While the old racks still worked with the base rails, the cantilever extension package didn't interface properly. I ended up opting to buy all new parts for the sake of simplicity. I'll put the used rack back on CL. I did have some problems with the order initially due to incorrect parts being in the package, but customer service at etrailer was top notch and everyone I spoke with was helpful. We ironed out the problems and etrailer sent out new parts immediately. What could have been a frustrating experience was turned into a slightly prolonged but easy process of getting a great rack on my truck. Thanks!

Great product. I use it to haul kayaks and lumber. It's surprisingly strong and sturdy. I put 300 lbs of lumber on it and never heard so much as a squeak. Installation was straightforward. I'll definitely buy another one for my next truck.

So far, so good. It arrived on time. The only things broken were two of the plastic "insert" pieces that go between the rails, but thankfully I only have a 5 1/2' bed, so I didn't really need them. I had it installed by the mechanics I was taking my truck to for other work and they said it installed pretty easily and one of the mechanics is going to get one for his own personal truck. We practiced setting it up and taking it down before I left. I can definitely do this on my own. I absolutely LOVE this product. I didn't want something that "whistled in the wind" or created drag every day even when I wasn't hauling the kayaks, so this is perfect. Thank you!

great service. The item was sent out right away.

The quality of the Thule T-Rac Pro 2 is very good and will last forever (never go back to steel). I have a short-bed GMC 2500HD and the storage space overhead for ladders, aluminum planks, 12 - 16 foot boards, etc. is a game-changer. However, I ordered extra load stops and M8 knobs direct from Thule and they did not include the screws to mount the stops (don't even list them in their catalog). I deduct 2 stars for Thule support being a pain

Easy to install. after one-year it is just as good as day one. Carries our ladder, 20' walk-boards, and pump jacks. We were happy on day one and still happy after 365 days. When we buy our next truck, we will buy the same rack. We just need to raise the money for the truck.

Great product. just need better instructions. good & sturdy will purchase again 100 %. Great service as well.

Very heavy duty ladder rack that does not "whistle" while you drive down the road. Easy install overall, and it is very easy to install and remove the racks as needed after the original install. At the time of purchase this was not available for my vehicle with a short 5.5' bed, but with very minor fabrication the rails for longer beds fit perfectly. I have recommended this rack to several people since purchased a year ago.

Great product! Packaging could be better for the larger pieces (rub marks). My 2018 Ram 1500 quad cab came with some small challenges that I had to solve myself. No videos or written words available. Basically if your bed rails are covered with a bed liner you need to remove the plastic sleeve in the rear stake pockets. Otherwise you won’t get an equal spacing from one rail to the other. You will also need to use the provided rubber tape with the wedges in order to make the rails level. Otherwise it went together great.