# 1
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
2012 Honda Pilot wiring harness 118265. Ordered harness for my Honda Pilot on Monday and received on Thurs!! All parts were in excellent condition on arrival from UPS. I had already read many of the reviews and tips for this harness and that made installation very easy. All the connections went together quickly and easily with no problems. Went to Lowe's and bought 1/4"-20x - 1" stainless bolts and lock nuts as previous installers had said they used. From start to finish took about 1 hr!! I used dielectric grease as stated from installers on connections under bumper exposed to any water. Excellent product and service from etrailer is always superb. I would highly recommend this connector for anybody needing to put 7pole outlet on 2012 Honda Pilot.
This part is sturdy and well built. Exactly as described
# 2
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
The item arrived on time and was exactly what I needed. E Trailer is a great place to fill all my towing needs.
Fastest delivery I have ever had. Ordered Wednesday at 5PM, arrived Thursday at 3PM. I'm only a couple hundred miles from Wentzville, but still, excellent. The hitch receiver (2008 Pilot) installed quickly and easily. No need to remove spare or lower muffler. I supported the left end on a large cooler and quickly maneuvered the right side above the tail pipes. The mounting holes were right on target. I had to tap mine to remove rust, but that's easy as well. The wiring harness was also a snapto install. Simple to plug into existing fitting and the wiring box tucked away nicely beneath the trim as advertised. There are options about what to do with the wiring tail and trailer connector. I chose the method shown in the video...leave it rubber-banded in the storage well. Others have run it outside through available holes, but I did not want to leave it exposed to road grime. etrailer's videos were very detailed and shown on my specific vehicle for both the hitch and the wiring harness. Good values as well. If I were Draw-Tite (or Curt) I would include a complementary rubber plug with their logo...cheap advertising.
# 3
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
2012 Honda Pilot wiring harness 118265. Ordered harness for my Honda Pilot on Monday and received on Thurs!! All parts were in excellent condition on arrival from UPS. I had already read many of the reviews and tips for this harness and that made installation very easy. All the connections went together quickly and easily with no problems. Went to Lowe's and bought 1/4"-20x - 1" stainless bolts and lock nuts as previous installers had said they used. From start to finish took about 1 hr!! I used dielectric grease as stated from installers on connections under bumper exposed to any water. Excellent product and service from etrailer is always superb. I would highly recommend this connector for anybody needing to put 7pole outlet on 2012 Honda Pilot.
This part is sturdy and well built. Exactly as described
# 4
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Great instructions, very timely delivery!
very high quality and fits perfectly.
# 5
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs
Exactly as described. Well made.
Great deal on this, it was almost $20 more locally. Received it fast, it was packaged very well. This looks really clean on my vehicle and I never have to worry about "did I tighten the ball enough".
# 6
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
Easy installation, low profile and excellent quality. Exactly what I was looking for in a hitch receiver for our 2021 Pilot.
This was the perfect fit for my Honda Pilot. Installation was very easy; no mistakes were made! The Curt Towing Starter Kit Trailer Hitch Ball Mount was the perfect match for the Trailer Hitch receiver, as it came in a plastic box that fit perfectly in the small stowable compartment in the back of the Honda. Everything stays in the car, tucked away neatly in the plastic box.
# 7
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Fastest delivery I have ever had. Ordered Wednesday at 5PM, arrived Thursday at 3PM. I'm only a couple hundred miles from Wentzville, but still, excellent. The hitch receiver (2008 Pilot) installed quickly and easily. No need to remove spare or lower muffler. I supported the left end on a large cooler and quickly maneuvered the right side above the tail pipes. The mounting holes were right on target. I had to tap mine to remove rust, but that's easy as well. The wiring harness was also a snapto install. Simple to plug into existing fitting and the wiring box tucked away nicely beneath the trim as advertised. There are options about what to do with the wiring tail and trailer connector. I chose the method shown in the video...leave it rubber-banded in the storage well. Others have run it outside through available holes, but I did not want to leave it exposed to road grime. etrailer's videos were very detailed and shown on my specific vehicle for both the hitch and the wiring harness. Good values as well. If I were Draw-Tite (or Curt) I would include a complementary rubber plug with their logo...cheap advertising.
At 68 yrs old, just single-handedly installed the 50 pound Curt hitch receiver on my 2016 Honda Pilot, using two jack stands and the vehicle's car-jack to position it correctly and hand thread the 6 bolts. Made a bit more room for myself by first lifting the back of the vehicle onto a makeshift ramp consisting of two layered 2x6 board. Also first tried to hand tighten the bolts before placing the hitch under the car and found I had a fair bit of rust to work through with rust blaster and wire brush. Instructions were clear and accurate. One tip, do the center bold on the muffler side first (to be able to slide the unit between the muffler and the frame, then the center bolt on the driver's side second. From there, it is a breeze. Took me an hour to get rid of the rust inside the welded bolts, and then an hour to install the hitch.
# 8
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 2" Rise, 4" Drop - 7.5K
Easy installation, low profile and excellent quality. Exactly what I was looking for in a hitch receiver for our 2021 Pilot.
This was the perfect fit for my Honda Pilot. Installation was very easy; no mistakes were made! The Curt Towing Starter Kit Trailer Hitch Ball Mount was the perfect match for the Trailer Hitch receiver, as it came in a plastic box that fit perfectly in the small stowable compartment in the back of the Honda. Everything stays in the car, tucked away neatly in the plastic box.
# 9
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Everything worked exactly as stated. Very easy to install. The videos are great. Shipping was fast. Very happy!!
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 10
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
2012 Honda Pilot wiring harness 118265. Ordered harness for my Honda Pilot on Monday and received on Thurs!! All parts were in excellent condition on arrival from UPS. I had already read many of the reviews and tips for this harness and that made installation very easy. All the connections went together quickly and easily with no problems. Went to Lowe's and bought 1/4"-20x - 1" stainless bolts and lock nuts as previous installers had said they used. From start to finish took about 1 hr!! I used dielectric grease as stated from installers on connections under bumper exposed to any water. Excellent product and service from etrailer is always superb. I would highly recommend this connector for anybody needing to put 7pole outlet on 2012 Honda Pilot.
This part is sturdy and well built. Exactly as described
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"