bing tracking image

Most Popular Hitch Bike Racks for 2011 Toyota Camry

change vehicle


Bike Rack Videos

Rola TX-103 Hitch Bike Rack Review - 2011 Toyota Camry

Today, on our 2011 Toyota Camry, we'll be test fitting the Rola TX 103, 3 Bike Carrier, part number 59403. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch and securing it with the pin and clip. With the bike rack secured, we'll go over a few clearance measurements. We have about 13 and 1/2" of ground clearance at the rear of the bike rack.Closest part of the bike rack to the closest part of the vehicle is about 8" away. With the cradle arms foldeddown, we've added about 11" to the overall length of our vehicle. We can now pull the orange tab at the top of the bike rack to swing out our cradle arms.



Swagman Titan Hitch Bike Rack Review - 2011 Toyota Camry

Today, on our 2011 Toyota Camry, we are going to do a test fit of part number S63410 from Swagman. This is a Titan 4 bike rack. A few things to note about this bike rack, that it will work with 1-1/4 receiver hitches, both class 1 and class 2. However, if you are using it for the class 1 hitch, you are limited to carrying just 2 bikes. Now, this will also work with a 2 inch receiver hitch with provided spacer. We will begin our test fit by installing the bike rack into the hitch.



Thule Hitching Post Pro Hitch Bike Rack Review - 2011 Toyota Camry

All right, today on this 2011 Toyota Camry, were going to do a test fit of part number TH934XTR from Thule; this is the Hitching Post Pro. A few notes about this bicycle rack is that it will work with 1- inch receiver hitches, both class 1 and class 2; however, when you use this for a class 1 receiver hitch, youre limited to carrying just two bicycles. Now this will also work with 2-inch receiver hitch with the included spacer. Today well be working with a class 2 receiver hitch. Now, well start off our test fit by installing the bike rack into the hitch, then well tighten down the anti-rattle bolt. After that, we can go ahead and give you a couple of clearance measurements.



Thule Doubletrack Hitch Bike Rack Review - 2011 Toyota Camry

Today on this 2011 Toyota Camry, were going to do a test fit of part number TH990XT from Thule, the DoubleTrack Platform Style bike rack. A few things to know about this bike rack is that it will work with 1- inch receiver hitches, both class 1 and class 2. This will also work with a 2-inch receiver hitch with the included adapter. Well start off our test fit by installing the bike rack into the hitch. Then, well go ahead and tighten down the anti-rattle bolt and install the lock on the other side. After that, well go ahead and get a couple of clearance measurements.



Yakima StickUp 2 Hitch Bike Rack Review - 2011 Toyota Camry

Today on our 2011 Toyota Camry well be test fitting part #: y02420, the Yakima stick up tube hitch mounted bike rack. Now our vehicle is equipped with the inch and a quarter hitch and our bike rack is already preassembled so were ready to go ahead and fit it to the vehicle. Well insert the bike rack shank into the hitch, well then line up the hitch pinhole and insert our anti-rattle bolt. Well then need to tighten down the anti-rattle bolt with the wrench and with it tight well install our safety pin. And that will secure our bike rack to the vehicle. With our bike rack secured to the vehicle well go ahead and give you a few measurements.



Thule Vertex 4 Hitch Bike Rack Review - 2011 Toyota Camry

Today on our 2011 Toyota Camry were going to do a test fit of the Thule Vertex 4 bike carrier part #: th9029. Our vehicle is equipped with an inch and a quarter inch hitch and with our bike rack already preassembled well go ahead and remove the 2 inch bushing so that the bike rack shank will slide directly into the inch and a quarter inch receiver tube. So now were ready to go ahead and install the bike rack onto the vehicle sliding the shank into the receiver tube and installing and tightening down the anti-rattle bolt. As you can see with the anti-rattle bolt tightened down, it really takes out any sway or rattle between the bike rack and the hitch. This is what our bike rack will look like when its in the stored position. Now well go ahead and take a couple of measurements, from the nearest point of the bumper to the bike rack we have 4 inches and from the lowest point of the bike rack to the ground we have 10 inches of ground clearance.



Thule Apex 4 Hitch Bike Rack Review - 2011 Toyota Camry

Today on our 20011 Toyota Camry were going to do a test fit of the Thule Apex 4 bike carrier part #: th9025. Our vehicles equipped with an inch and a quarter hitch, so with our bike rack already preassembled well need to remove the 2 inch by 2 inch bushing so the bike rack shank will slide directly into the receiver tube. As we slide the shank into the receiver tube well line the integrated hitch pin up with the receiver tube holes, then use the hand knob to secure the bike rack to the hitch. Now with our rack in a stored position were going to go ahead and take a couple of measurements. From the closest point of the bumper to the bike rack is 4 inches. From the lowest point of the bike rack to the ground we have 10 inches of ground clearance.



SportRack EZ Hitch Bike Rack Review - 2011 Toyota Camry

Today on our 2011 Toyota Camry we'll be test fitting the SportRack 2 Hitch Mounted Bike Rack, part number A30901. A quick note about this bike rack, it will fit either 1-1/4 or 2-inch hitches. Our vehicle is equipped with the 1-1/4-inch hitch and our bike rack is preassembled so we're ready to go ahead and fit it to the vehicle. We'll begin by simply inserting the bike rack shank into the hitch. We'll line up the hitch pin hole and insert our anti-rattle bolt. We'll then tighten it down with a wrench.



Rhode Gear Highway Hitch Bike Rack Review - 2011 Toyota Camry

Today on our 2011 Toyota Camry, we'll be test fitting the Rhode Gear Highway 2 Bike Carrier, part number RG8015220. Now, our bike rack is already pre-assembled and our vehicle has an 1-1/4-inch hitch, so we're ready to go ahead and fit it to the vehicle. We'll insert the bike rack shank into the hitch. We'll line up the hitch pinhole and insert our anti-rattle bolt. We'll then tighten it down with a wrench. With the anti-rattle bolt tight, we can install our safety pin on the other side and that will secure our bike rack to the vehicle.





2011 Toyota Camry Bike Rack Questions