# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Nice finish quality.
Great product!
# 2
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 3
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Nice finish quality.
Great product!
# 4
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
Purchased this hitch as a companion for our Reese anti sway control. The small ball for the Reese sway control fits in the bracket and the 2” drop on the hitch is exactly what we needed to have our Jayco camper level when towing.
# 5
Ball Mount Adjustable with Sway-Control Tab, 6,000 lbs
Just received this ball mount and have just mounted the hitch/sway bar balls. Can't wait to use it next weekend. This will be extremely helpful when switching between trailers on my 2019 4Runner. I'll write a thorough review once we've used it in a real world trip with our travel trailer. Only one minor detractor is a rather nasty burr on one of the welds that didn't get ground smooth. it's rather sharp. I'll grind it down and add some touch-up paint, but otherwise, this is a terrific item.
The ball mount did not fit onto the shank. This was a very disappointing experience.
# 6
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 7
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 8
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Great customer service Will! Provided info I needed to make sure product fit my 2014 4Runner (i.e., depth of shaft from back to center of hole, needed to be 3" or less...). They have all of that info! Good product for my use! Thanks Etrailer!
Great solid hitch with 7500lb rating. The length allows me to use an over the hitch bike carrier.
# 9
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
Great solid hitch with 7500lb rating. The length allows me to use an over the hitch bike carrier.
Great customer service Will! Provided info I needed to make sure product fit my 2014 4Runner (i.e., depth of shaft from back to center of hole, needed to be 3" or less...). They have all of that info! Good product for my use! Thanks Etrailer!
# 10
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Great solid hitch with 7500lb rating. The length allows me to use an over the hitch bike carrier.
Great customer service Will! Provided info I needed to make sure product fit my 2014 4Runner (i.e., depth of shaft from back to center of hole, needed to be 3" or less...). They have all of that info! Good product for my use! Thanks Etrailer!
# 11
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
# 12
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 13
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 4" Drop - 7,500 lbs
Excellent company! Super fast shipping!
All of the products I've have bought for my trailer project from etrailer have been great. My go-to place for anything trailer related!
# 14
Curt Class III Ball Mount with 2-5/16" Ball - 2" Drop - 7,500 lbs
Great solid hitch with 7500lb rating. The length allows me to use an over the hitch bike carrier.
Great customer service Will! Provided info I needed to make sure product fit my 2014 4Runner (i.e., depth of shaft from back to center of hole, needed to be 3" or less...). They have all of that info! Good product for my use! Thanks Etrailer!
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"