Most Popular Adjustable Ball Mount for 2008 Buick Enclave

Super hitch. Best money spent for towing so far. Prompt shipping and a pleasure to buy from this vendor! Thrilled with my experience and will look here for all my trailer and towing needs.

Love these hitches. This is my second one. Honestly, it will save you money. One month a few years ago, I spent $300 on hitches because I would forget or did not have the right height, ball, etc. finally bought a b/w and never had a problem again. I bought this one because I got a new truck with 2" receiver. Great quality, simple, reliable.

It’s a beast! Installed it n pulled my dump trailer no more rattling jerking nosies etc, wish it was 20lbs lighter my only complaint, The locks could be better I won’t be leaving the hitch installed, the locks are light weight n I believe a hammer will break them off, curt needs to use steel or stainless steel for the locks ( body of locks)

I think overall it is a good product but there are some annoyances. To begin with, this hitch is very heavy. The package weight was 75 pounds, but the main body is at least 50. I can manipulate it, but someone weaker may not be able to. Setting the ball is also a bit tricky with the stopper between the ball mount and the riser. I was able to use my body weight to get the stopper compressed and the pin in, but it was difficult. One suggestion might be to hitch the trailer with the pin out then use the tongue weight of the trailer to get the lower pin lined up. This will not be a good solution for being on the lowest position, but it works for all the others. My other annoyance is it really messes up the back up camera and proximity sensor. Yes, I know I can disable the sensor, but the camera can't be moved which makes hitching alone a bit more annoying. I feel like there is a more elegant design so that there is not a bulge at the top of the riser, but I can't say for sure.

Easy to use. Stows away to avoid bumping knees. Would have given 5 stars but it’s expensive. I would still recommend.

I purchased the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black and am extremely happy with it. It was $100 cheaper than anywhere else I shopped. Was delivered quickly and was an easy install. I used it to haul a trailer full of wood that I cut up and it got the job done! It is very heavy duty and takes the place of multiple single hitches. It’s nice to have all the options in one.

Works as it should. I enjoy not having to hunt for different hitches when switching trailers. So far no rust..

Works great, very easy to adjust. Keep a rag near to wipe off grease when handling pins and any covering balls for winter rust prevention. Only issue is when using 2" ball in the lowest position,the 2 5/16" ball opposite hags bellow hitch body and scrapes the ball on pitched driveways with low drop gate trailers

very happy with the product!

Fits our VW Touareg perfectly and allows us to tow a variety of things now. As can be seen in the pictures the hitch has a +5-inch gap between the bumper and the vertical adjustment pillar and the trailer itself is out further so there's enough room to get to the rear hatch and maneuver the vehicle/trailer.

Went with the B&W due to the length of the shaft going into the receiver. My 2024 Ram's receiver is recessed under the bumper. This hitch is long enough to accept my Towtector product. Similar to Rock Tamers. Also, Brittany in customer service was awesome to work with as she guided me towards the product that worked for my application.

This ball mount is extremely heavy duty. I had a stock class IV hitch and aftermarket ball mount on my Ram 3500 SRW and it was bending towing a 14000 lb dump trailer. I upgraded to a class V hitch and this mount and it's working great. I have 6 trailers that I pull with gooseneck, 5th wheel and ball hitches. The only 1 that uses 1 7/8" ball is a little 5x8 utility trailer that I'm converting to 2" so I got the 2 ball instead of the 3. When turned sideways it works as a step to get into the truck but only if the tailgate is up. It doesn't stick out far enough when the tailgate is open. The reason for 1 less star is the documentation; you need more information to make the best choice. I originally ordered a different PN and it hung way too low bc is mounted under the existing hitch. To remove the stock hitch, you also remove the integrated mounting brackets for the bumper. I ordered a PN for a truck without a hitch and cut off the receiver tube with a torch. Also, I upgraded the 3 1/2" exhaust to 4" and now at idle the exhaust rattles on the much larger frame of the class V but a slight modification in planned to take care of that. Installation was fairly straighforward once I removed the original receiver tube.

I've used the hitch over the last year on several trailers and loads. The adjustability made towing a much better feel and ride over a fixed hitch that at times not the greatest. I see no wear, very easy to adjust even once coupled to the trailer and finding the trailer needs to be leveled better.

Works flawlessly. I was very excited the day I got home and my Rapid hitch was on the front porch. It came in nice box and was packaged very well. I opened it up and unpacked my rapid hitch and I was very impressed with the quality and precision of this hitch. All of the machining was PERFECT and everything fit together right. I put it in my truck right away. Going down the road with the trailer on and off there is absolutely no rattles, clunks, or jolts. I also love how everything is aluminum or stainless steel, NO RUST. I wish I could've gotten the greaseless model but my boat is too heavy. My only complaint is that it doesn't come with locking pins. With a hitch this expensive I really wish it came with them. Do yourself a favor and order them with your rapid hitch so you don't have to pay for shipping in the future. Other than that great product and I believe it will outlast me.

Impressive quality!

Sooooo....you sent me a product that was somehow put together backwards and I cannot take them apart somehow the ballhitch is stuck on the male portion backwards and defies gravity and doesn’t need a pin to stay on(becaue thier is no where to put the pin in cause it’s backwards

Nice hitch very adjustable use it to to pull Diamond C 208 lpx trailer with a kubota SVL 90-2 skid steer close to 16000 lb

It's great having the hitch always attached to the truck. It's just there when you want it, stowed and out of the way when you don't. I wish they had a one-ball version as I haven't needed both, yet.