Most Popular Universal Fit for 2002 Chevrolet Express Van

Good well built product. Ratchet straps are great ! They don't fit the Express van the best but will do the job. Those Express mirrors are not easy to fit. I would prefer a flat mirror over the convex one so that is not distorted when backing but not really that bad. It will do the job. Once set up easy on easy off !!!

After years of replacing mirrors from other sources I purchased a pair of these. There fantastic, plenty of adjustments. Got covid on vacation, really sick and did not properly install mirror. Not broken but scratched badly from asphalt at 55 mph. Purchased a replacement, scratched one is my spare.

Click to Enlarge

They were easy to install (once you figure out where the strap release button is located) and worked like a charm! I drive a 2017 Suburban and towed a Keystone Bullet (about 8 1/2’ wide and 30’ long) 160 miles today without any issues. The mirrors are not what I’d call pleasing to the eye, but they certainly provided an additional 18” of span, enabling me to look down the sides of the trailer and see cars behind me.

Click to Enlarge

Click to Enlarge

These are working out great! I'm now a wiz at putting them on too. They're great quality, sturdy and snug fitting. Very happy.

Click to Enlarge

Wanted to make sure what I ordered would fit my vehicle. Your website offered the product I was looking for. Received in good condition and in a timely manner. Haven't traveled with the clamp on towing mirrors yet but hope they will perform well.

Wanted to make sure what I ordered would fit my vehicle. Your website offered the product I was looking for. Received in good condition and in a timely manner. Haven't traveled with the clamp on towing mirrors yet but hope they will perform well.

Purchased a pair for our 2017 Jeep Grand Cherokee towing a nuCamp 400 from FL to AK and back. Three months and around 16k miles. Pros - other than an adjustment the second day, I never had to adjust the tension straps again. They were easy to mount and did not interfere with our mirrors folding inward. They weathered three months on the road without issue though I was beginning to worry about the straps becoming brittle. I noticed this once I removed them. Had I kept them, I would have used some silicon to rejuvenate the rubber. Cons - the only con is they shake. They shake to the point that sometimes I couldn't distinguish what exactly was behind me. I knew there was a vehicle, but the distortion from the vibration prohibited me from getting a clear view of exactly what was behind us. Impressions - they worked for our trip but I knew I would want something else for our next long trip, so we invested in a Furrion Reviewing Camera.

Click to Enlarge

Click to Enlarge

Click to Enlarge

My rating is less to do with the product and more with etrailer. I ordered an identical mirror (CIPA model 11950) on amazon for less than half the price, 1 day shipping, free delivery, and it did not fit my vehicle so I bought the one etrailer recommended for my vehicle. I thought it was CIPA model 7070 but that is just the etrailer model #. I got CIPA model 11950 which I already have. Now I need to return the ones to etrailer and I'm being charged $16 to do so. This could have been avoided if the CIPA model number was immediately visible in the description (it is there in small print at the bottom). Also, my vehicle's mirror (2018 explorer) is not the same as the 2018 explorer in the video and picture. So it's not accurate for etrailer to say it fits all 2018 Explorers.

Pros: Very easy to install. Will fit on almost anything. Cons: Bit of a challenge to adjust the in/out tilt on fixed mirror housings. Would like a little more height, but it's OK. This is a good solution for the casual user like me. Installation is painless. If you need more control over height or tilt, this is not for you.

Click to Enlarge

I bought the trailer mirrors for my Jeep Grand Cherokee to pull my pull behind trailer. See pictures. The mirrors attach easily and securely and shake very little when driving. I need them mostly when backing up and I can see where the trailer tires are going. The mirrors do not adjust easily but when you do they stay in place. What I especially like is the size of the mirrors and having two independent mirrors.

Click to Enlarge

They will not stay on the mirrors for a 2023 Grand Cherokee. After very careful installation they fell off because the shape of the mirror is rounded and you cannot get a good grip to hold the mirror on

The mirrors worked better than I expected and fit a Kia Sorento quite well. The design is pretty easy to mount and dismount once they're set up.Ive wind tested them to 72 mph when passing and they've held tight

These fit no where near factory locations on a OBS Ford, definitely not “replacement”. They are flimsy as well. Waste of $150

This was exactly what my spouse wanted for her 1992 truck. It is an old school truck so they went with it perfectly. Has the look she wants. However, we both forgot how much they shake. The higher the speed, the more they shake. The shipping was fast; etrailer was great. Not their fault they shake.

Very good quality construction. Very good fit for a non-custom mount. Thick rubber straps are stretched over the car’s side mirror and hold the mirror well. My car is a 2017 Ford Expedition EL. Note: when you fold in the car mirror the towing mirror partially blocks the progress so that mirror stops early. It is still folded but not as completely as without the tow mirror. And yes, they are two identical mirrors so on one side the straps go up, on the other side they go down.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

BUYER BEWARE!!!!!! I had great hopes for these mirrors. They look great. They appear to be very adjustable right out package. They fit on my Tacoma securely. They don't interfere with the function of the stock mirrors. Everything was moving along "swimmingly". Then I sit inside my truck to do the final adjustment (moving the actual mirror to get the correct setting and lock it into the "sweet spot"). The new Mirror is very stiff...doesn't want to move. Well, its new...so....Okay, I don't want to ruin anything...so.... No worries, I go get a phillips screwdriver to loosen the back screw a smidge so the friction adjustment can work . Come back start to back the screw out just a smidge...nope...still can't adjust the...wait...unscrew some more....that's not an adjustment screw at all. That just screws directly into the back of the mirror to hold it solidly in place. Worse yet, There is no friction mechanism on the back of the mirror at all. It is one solid piece of plastic. The molded plastic replicates the look as if it has the ability to move, but in reality....There is no way to do small mirror corrections once you have this thing installed. What the Actual people?????!!!!!!???? If you can't do minor adjustments to the mirror while you are in the vehicle, then the mirror is completely useless. I wouldn't recommend this product to my worst enemy. It's a piece of crap. DO NOT BUY!!!! A complete waste of time, money, and shipping costs. Now, I have to incur more shipping costs to send this POS back to etrailer. Hey, etrailer....Do Better next time!!!!

Click to Enlarge

Click to Enlarge

Click to Enlarge