# 1
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
Top notch product! High quality and is holding strong against these Alaskan roads and trails!
Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.
# 2
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
The parts are of an excellent quality, Web site service was great, I could find everything I needed and all of the support to complete the replacement job. Delivery was exceptionally fast for my orders.
This is a great kit! It included everything we needed to replace the old, worn-out brackets on our 6'x10' trailer. The directions were helpful and the brackets and hardware are nice and solid. We've had zero issues with the leaf springs (purchased on etrailer.com, also) or the brackets. Would definitely recommend!
# 3
Replacement U-Bolt for 2" Wide, Square Axles - 7/16" Diameter - Zinc Plated
U-bolts fit my atv plow perfectly. Delivered on scheduled time. Very happy. Also good price for items.
Exactly what I needed...delivery was spot on...thank you!
# 4
Torflex Lift Kit - Tandem Axle - 3-1/8" Lift
Customer service is impeccable and helpful. The length of the lift fit our mount but the wholes for two bolts didn’t line up. Our trailer has a Lippert Axle and we had to drill two holes to fit the bolts properly. I contacted Lippert and they no longer sell the lift kits. Aside from going to a shop and paying over $1k for someone to fabricate a solution for us; this is the route we chose.
Great product. Added height to the trailer to increase the height adjustability of the tongue to prevent hitting the top of the bed rails.
# 5
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES
Did not need due to upgrading to Dexter Heavy Duty Suspension Kit. It
# 6
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
It looks like it will fit my 1954 Jeep CJ3-B Dana 44 axle tube, although it is 1/8" wider than ideal. Thanks
When I recieved the product I was ready and excited to get it installed. I had to do an axle flip to gain frame clearance on my custom jeep trailer build and needed new axle perch mounts. After I triple stitch welded the steel It was a perfect fit, and a year later no problems and holds great.
# 7
Swan-Shaped Equalizer for 2" Wide Slipper Springs - 10-1/8" Long - 7/8" Center Hole
Your knowledge of the parts was excellent my trailer is an older model and I was concerned on receiving the correct parts. Thankfully they are a prefect fit and the delivery was right on time. Thanks John
I think that the one pictured is nice and shinny black And the one I received is rusty
# 8
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
Not a trailer, but... We needed a set of shocks for a three-wheeled motorcycle truck conversion for our resort/farm in upper Thailand. I had to pack it in my luggage for the trip over. The vehicle came with no shocks on the back axle and the ride was really bad. This kit, with a bit of modification, really did the job and the ride is now significantly better in terms of smoothness and handling. Shocks were a bit long, but it worked out OK.
The second bottom plate isn't correct. The u bolt don't fit the plate. I need a replacement part. The u bolts need to be longer also. I received this item over a week ago and was able to work on this Saturday and when unboxing the items, I noticed the difference is size of bottom shock plate bolt pattern was wrong. Please send me the correct item and I'll send this defective item back. Thank you
# 9
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center
I spoke with Trevor, Thursday the 11th, I have 1set, 2 PCs, of shackle straps that are shorter than the other 6 shackle straps. I have been waiting for An email from Trevor, have not received it. Could I get the correct straps sent 2 PCs needed. Thanx
This hanger kit and leaf springs for my tandem boat trailer was PERFECT! I did one side at a time. Once we got the old crap off the trailer, reassembly was a snap. It took about three hours from start to finish. Most of the time was spend removing the frozen center bolt from the old equalizers. I'm very happy I opted for the two center bolts to be "wet bolts". Thanks again, I would definitely recommend etrailer to my friends. Regards, Bob
# 10
Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
We have had great experience with eTrailer, These parts came in as described.
This product here fits perfect on my trailer no adjustment needed to be done go etrailer .. it was cheap plus fast shipping..
# 11
Replacement U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter - Zinc Plated
We used the U-Bolts on a device built to allow multiple antennas on a single pole. I attached a couple of images, one after construction and one on a rooftop installation.
I tell all my friends to order from etrailer.com. great products from the u bolts to rims and tires. I have replaced all the rims and tires on my tandem axle boat trailer, you can not beat the price or the service. Pat C. is always spot on in guiding you to the right parts. shipping fast and on time. Thanks Pat C. and etrailer Barry
# 12
Dexter Bronze Bushings - Qty 4
I ordered the Tandem axle Equa flex shackle wet bolt kit. For the second time I received the shackle bolts were not the wet bolts and I am very disappointed. I am travelling with my RV and I have been waiting for 2 weeks for my parts. Not Happy
Installed these with the Lippert AP wet bolt kit and Road Armor Shock Absorbing Equalizers. No more clanking and banging from the trailer going down the road and especially making tight turns.
# 13
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
Great price. Fast delivery. Great communication. They actually contact you to make sure you've received your order and everything was as expected. eTrailer comes through every time. I will buy from these guys every time I need trailer parts. My only complaint is that the hangers are bent out too far, had to bend everyone of them in about 1/2" to get nuts on the bolts. Added about 1/2 hour of work to the job.
The brackets in the kit were not square. Luckily we bought an extra set of brackets which were square.
# 14
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
Order received was missing significant pieces as per my notification to customer service. Looks like all parts, nuts bolts flanges were all packed loose in the box, UPS destroyed the package and reboxed, resulting in missing items. Attached picture is what I received.
Glad I chose etrailer for my purchase will definitely buy from them again, I had a old boat trailer that was given to me from a friend will convert the boat trailer into a BBQ concession trailer later with heavier axles and springs now using the axles and springs from that trailer to the new one for my UDS smokers, I have 5 of them to mount to the new one making them dedicated to that trailer.
# 15
Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1
Purchased a Dexter leaf spring. Thought it came with bronze bushings, they were nylon. No biggie, they were in stock and arrived 2 days later. Perfect fit. Thanks guys!
Excellent service. When I need trailer parts or hitch they get my business!!
# 16
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
Perfect component for my 2000# undercarriage project. Very sturdy and fit as advertised.
My 6' x 10' landscape trailer was a homemade by a prior owner. While it was mostly constructed very well, the spring hangers were not correct. The spacing for the springs was also wrong, and it had very little fender clearance. There was also evidence that the spring U-bolts had contacted the frame on occasion. (I do not carry loads anywhere near the 3500# axle rating.) I added an extra set of holes on the front hangers in case the ride height proved to be too much, but I like the way it sits with the stock holes. I don't think I'll be utilizing the extra holes. This kit was just the ticket to increase the suspension travel and fender clearance on my landscape trailer. Now it "sits right"!
# 17
Rear Hanger for 2" Wide Slipper Springs - 5-1/4" Tall - 5/16" Bolt Hole
Works like their supposed too. I've built several trailers and all were built with etrailer parts, good quality, good service and great prices.
Very good quality. I was really surprised at the high quality material and welds for the price I paid.
# 18
Nylon Bushing - 1/2" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long
Ordered several trailer parts. Great communication. Worked well when parts were back ordered. Good quality parts. Like the on line videos. Good experience overall.
After a year of being installed, the nylon bushings seem to be working just fine. No problems.
# 19
U-Bolt Plate for 2-3/8" Round Axle - 1-3/4" Wide Springs - 1/2" Bolts - Galvanized
1 Year in and still working flawlessly. Put around 2500 miles on the boat trailer since they have been installed.
Easy install. Holding up well in salt water.
# 20
Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
exact replacement to original, worked and welded-up great.
These were purchased to assist with raising a dual-axle travel trailer. They arrived well packaged, and looked to be well made.They took readily to welding, so there was no issue with inferior material. The attached images show them being welded side-by-side to the frame rail extensions, then the entire assembly attached to the main frame.
What our customers are saying:
"very easy to shop"