See what our Experts say about this CURT Trailer Hitch Ball Mount

• Ball Mount for Curt RockerBall on 2012 Toyota Tundra
  Hi Raymond; I understand you need a ball mount like the # C45312 so you can install your Curt RockerBall # C29FR. Do you also need a trailer hitch like the # C15398 for your Tundra? Since you said you need a hitch, and a receiver, I'm just trying to clarify. If you have a hitch on your truck it probably has a 2" receiver on it that the ball mount will fit. I do know these terms get used interchangeably a lot so it can be a bit confusing. Assuming you have a hitch already on the Tundra...
  view full answer...
• Comparison of B&W BWBMHD30011 and Curt C45312 Ball Mount
  The Curt # C45312 and the B&W # BWBMHD30011 ball mount are wholly manufactured in the USA. Both ball mounts feature a 2 inch drop or a 1 inch rise if inverted. The B&W has a 16K capacity, with the Curt model having a 12K capacity. Both are designed for trailer balls with a 1-1/4 inch diameter shaft.
  view full answer...
• 2" Ball Mount with 2" Drop, 2" Hitch Ball and Receiver Pin and Clip Made in The USA
  While the Curt Fusion Ball Mount # C45134 is made in China we do have their similar Curt Solid Ball Mount # C45312 that is made in the USA. You will need the 2" Hitch Ball # CB26C and Gen-Y Hitch Pin and Clip # 325-GH-096 to have all the parts made in the USA.
  view full answer...
• What Diameter Ball Hole Does Curt Ball Mount # C49FR Fit
  You wouldn't most likely. The ball hole you'd need to have in your ball mount to use the hitch ball # C49FR would need to be 1-1/4 inch. There might be some slightly variance but this dimension is pretty standard. The hitch ball # C45312 is an example of a ball mount that fits this.
  view full answer...
• Availability of Just Ball Mount of Curt Ball Mount # C45036
  Yes, for just the ball mount portion of the part # C45036 you'd want the part # C45312 instead. This doesn't come with the pin and clip # C21504. If you want the smaller 1-7/8 inch ball kit use # C45034 or # C45041 for the 2-5/16 inch.
  view full answer...
• Ball Mount With 1 Inch Rise That Extends More Than 6-1/2 Inches & Fits 2 Inch Trailer Hitch
  We can get you set up with a longer ball mount that has 1 inch of rise and will fit your 2 inch trailer hitch receiver. There is a really good option from Curt that is extended and will work perfectly for you: - Curt Solid Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 10" Long # C45312 This ball mount measures 10 inches from the center of the hitch pin hole to the center of the ball hole so it will give you the clearance you need. Then to secure the ball mount to your hitch, you will...
  view full answer...
• Where Is The Draw-Tite Drawbar # 3593 Manufactured At
  The Draw-Tite Drawbar # 3593 is made in Mexico per the manufacturer. The ball mount has a sturdy steel construction with a solid shank. It has a black powder coat finish that covers an e-coat base which offers superior rust protection. The 2 inch hitch ball # 19258 and the 1-7/8 inch hitch ball # 19256 will work with the shank above. To lock the drawbar to your trailer hitch The etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches # e98879 will help prevent theft of the ball mount...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?