Every bump in the road can send a jolt through your trailer and gear. The Shocker Impact cushioned drawbar uses twin bump stops to dampen road shock so you get a smoother, quieter towing experience. It’s built for farm use—perfect for hauling hay wagons, anhydrous tanks, or other equipment—without beating up your rig or your load.
When you’re pulling serious weight, you want gear that’s built for it. This mount is rated at 12,000 lbs gross towing weight and 1,200 lbs tongue weight, so it’s ready for heavy-duty farm trailers and equipment haulers. The Grade 50 steel plate construction and cold-rolled steel shank give it the strength to handle tough jobs day after day.
Switching between different trailers is easier when your hitch adjusts to match them. The channel-style design features 7" of vertical adjustment with a 4" drop or 4" rise, so you can level out a variety of trailer setups quickly. It connects with a cushioned drawbar attachment with a 1" hole that fits different towing needs on the farm.
Farm gear sees dirt, weather, and plenty of use. The XRC shot-blasted and powder-coated shank resists rust and corrosion, while the zinc-plated drawbar keeps its finish looking clean after long hours on the road. It’s ready for years of steady towing without needing much attention.
Hooking up shouldn’t be a fight. This setup comes with two easy-to-remove ball mount pins, large safety clips, and big rings that are simple to grab—even with gloves on—so securing or swapping attachments takes just seconds.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the shocker impact hitch with the two inch shank and the adjustable cushion drawbar mount for farm applications. This has a 12,000 pound gross towing weight capacity. Now this shock absorbing draw ball mount will use bumper stop technology to reduce any road shock and provide a more comfortable towing experience. The channel-style mount right here includes this cushion drawbar attachment that I use as a one inch hole to accommodate a variety of towing needs.
Now it does use a dual bump stop right here on the channel mount. This will absorb a lot of your road shock, creates a nice smooth tow. And then the four cushions. You can see two on each side of the drawbar. This will also help cushion the connection.
Now this is not for use with a hitch ball. This is just designed to attach a drawbar tool. So this is perfect for towing hay wagons, anhydrous tanks, and other form applications. It is a nice, solid, heavy-duty adjustable channel, provides seven holes right up and down here with a seven inch range of adjustability to tow trailers of various heights. The maximum drop you'll get which is this position it's in right now is about four inches.
If you flipped it over and used it in the rise position, the maximum rise will get you about three inches. Now the distance between these adjustment holes is one inch center to center and the inside width on the channel is three and three quarter inches. This is designed to work with all the Shocker Hitch ball mounts and attachments, including the standard mount, drop mount pintle hook and many other ones that we do sell separately on our website. This is a nice Grade 50 steel plate construction. Cold-rolled steel shank provides maximum durability.
And if you notice in the shank it has two hitch pin holes. The diameters of those hitch pin holes are 5/8, 7 inch. It does have a nice premium powder coat finish on the channel mount and a nice zinc plated finish on the cushion drawbar. If you notice the pins that hold the drawbar attachment, they are a large, easy, they're very easy to remove. They're large rings that make it very easy to grasp with all your hand and your fingers in there. So there's no more fumbling with any small hitch pin heads. The rings do not collapse. As you can see, they stay in that open position. And over here they do use the nice large safety clips that makes securing clips effortless. So you can just pop them right off, slide out your pin. And then when you slide your pin back in, just line it up with the hole and then push your clip right in there. Very easy to remove and easy to install. These parts are made in the USA. Few specs on this again, the application fits two inch by two inch trailer hitch receivers, and the gross towing weight capacity is 12,000 pounds. But that should do it on the review of this Shocker Impact Hitch with the two inch shank and the adjustable cushion drawbar mount for farm applications..
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.