Product Experts Available Now!
Call 1-800-940-8924
Air Safe Shock Absorbing Ball Mount - 2" Ball - 2" Hitch - 6K GTVW
(0 reviews)
Price: $543.01
We'll connect you with nearby partnered installers who know this exact setup.
Air Safe Shock Absorbing Ball Mount - 2" Ball - 2" Hitch - 6K GTVW
Part Number: AS64VR
$543.01
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Q & A (0)
- Videos (2)
- Photos
Air Safe Hitches Trailer Hitch Ball Mount - AS64VR
- Adjustable Ball Mount
- Fits 2 Inch Hitch
- One Ball
- 6000 lbs GTW
- Shock Absorbing
- 2 Inch Ball
- Air Safe Hitches
- Steel Shank
Looking for a smoother ride without giving up a traditional ball mount? This hitch ball mount uses a custom-engineered air bag to help reduce shock and vibration by up to 60 percent. An included hitch ball provides the connection to your trailer.
Highlights
- Reduce Towing Shock and Vibration: Custom-engineered air bag cuts shock transfer by up to 60 percent.
- Handle Moderate Trailer Loads: 6,000-lb gross towing and 600-lb tongue-weight ratings cover the stated load range.
- Start Towing with the Ball Included: Included 2" hitch ball connects directly to your trailer coupler.
- Skip Routine Bearing Maintenance: Zero-maintenance design has no bearings to crush or wear out.
- Install in Seconds: Ball mount slides directly into your existing receiver hitch.
- Keep the Mount Easier to Handle: Hollow steel shank combines lightweight construction with heavy-duty strength.
Features to know about
Smoother Towing Across Rough Roads
Potholes, expansion joints, and abrupt stops can send shock and vibration through your trailer and tow vehicle. The custom-engineered air bag reduces shock transfer by up to 60 percent. Your towing setup carries less impact through rough sections of road.
Start Towing with the Ball Included
Adding a separate hitch ball creates another part to source before your trailer can be connected. The included 2" hitch ball provides the connection point for your trailer's coupler, with built-in wrench flats for holding the ball while tightening the nut. Your ball mount arrives ready for the final coupler connection.
Skip Bearing Maintenance
Internal bearings can create wear points during repeated towing. The zero-maintenance design has no bearings to crush or wear out. Your mount stays in service without bearing replacement or upkeep.
Install the Mount in Seconds
Frequent hitch changes can slow down trailer setup. The ball mount slides directly into your existing receiver hitch in seconds, while the hollow steel shank keeps the assembly lightweight without giving up heavy-duty strength. Your towing connection can be positioned and removed with less handling effort.
Keep Road Exposure off the Finish
Regular towing exposes your mount to moisture, road debris, and surface wear. Powder coating resists corrosion and wear, while precision brass air fittings help prevent leaks and extend product life. Your mount stays protected and the air system remains ready for continued towing.
Specs
Application:
- Class 3 and Class 4, 2" x 2" trailer hitch receivers
Capacity:
- Gross towing weight: 6,000 lbs
- Maximum tongue weight: 600 lbs
Dimensions:
- Ball diameter: 2"
- Shank dimensions: 1" diameter x 2-1/8" long
Warranty:
- 2-Year warranty on mount
- 1-Year warranty on hitch ball
HACL3STD2 Air Safe Hitches Air Receiver Hitch with Ball Mount for 2" Hitch Receivers - 600-lb TW
40004 Curt 2" Diameter Hitch Ball with Medium Shank - 6,000 lbs GTW - Chrome
Video of Air Safe Shock Absorbing Ball Mount - 2" Ball - 2" Hitch - 6K GTVW
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for DIY Install Air Safe Shock Absorbing Ball Mount - 2024 Chevrolet Colorado
Ratings & Reviews
No reviews
0
0
true
See what our Experts say about this Air Safe Hitches Trailer Hitch Ball Mount
- Does the Air Safe Ball Mount Need Regular Maintenance or Air Adjustment?Hey Mark! That's a fair concern, especially if you're using your trailer regularly. The Air Safe Shock Absorbing Ball Mount # AS64VR is designed to be low maintenance. It doesn't use internal bearings that need replacing, and the brass air fittings help prevent leaks. You will still want to check the air pressure periodically and make sure it's properly adjusted for your trailer's tongue weight. It's not quite as hands-off as a rubber torsion hitch, but the air cushioning is the big advantage...
view full answer... - Is an Air-Cushioned Ball Mount Worth It for a Boat Trailer?Hey Brian! The Air Safe Shock Absorbing Ball Mount # AS64VR could be a really nice upgrade for your Colorado, especially with those rough lake roads! The air bag absorbs some of the up-and-down shock before it transfers between your truck and boat trailer. This helps smooth out the ride and reduces the jolts that your trailer experiences. You don't necessarily need a huge trailer to benefit from cushioning, although the actual improvement depends on your tongue weight and road conditions....
view full answer... - Upgraded Air Bag Ball Mount To Reduce Jerking While Pulling Travel Trailer With 2022 Ford F150Hey Kevin! Yes, the Air Safe Shock Absorbing Ball Mount # AS64VR would be a great option for reducing those harsh bumps you're feeling! Unlike a standard ball mount, this uses a built-in air bag to cushion the connection between your truck and trailer. Air Safe says it can reduce shock and vibration transfer by up to 60%, which should make a noticeable difference on rough roads. Its rated for 6,000 lbs of towing and 600 lbs of tongue weight, so just make sure your trailers loaded tongue...
view full answer... - Will Air Safe Cushioned Hitch Help Protect a Forest River RPod Camper From Damage on Rough Roads?Hey Dennis! Absolutely! The Air Safe Shock Absorbing Ball Mount # AS64VR would be a great upgrade for that kind of camping. It's built-in air bag cushions the connection between your Tacoma and camper, reducing the shock that travels between them by up to 60%. This will help reduce the harsh jolts your camper experiences on gravel roads, while also making the ride more comfortable inside your truck. It fits your 2 inch receiver and supports up to 6,000 lbs of trailer weight and 600 lbs...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Video Edited:
Dustin K
Edited by:
Mary K
Updated by:
Michael B
Updated by:
Cody B
Video by:
Ethan H
Written by:
Kim H
Test Fit:
Matthew B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.