Straight Barbed Fitting for HydroMax RV Fresh Water Pump - 1/2"

Video Transcript for HydroMax RV Fresh Water Pump Straight Barbed Fitting Review

Today, we're going to be taking a look at some replacement parts for your hydro max water pump. So we are going to have a kid of two, these little fittings. These are just going to be half inch NPT fittings. And this all you're going to need is to grab some tubing with an ID of a half an inch. So the OD, the outer diameter of this is a half an inch. And then the tubing that has a half inch interior diameter, it's going to slip right on there.

So let me show you real quick, just like that. So that's all you really need and you will need some hose clamps. And we do have those here on our website. So basically depending on how the system is set up, you're just going to thread it on. And if you're replacing, just because maybe they cracked or something like that, you do want to put a little bit more tape.

So this is what yours looks like. I would put some more thread tape on there before you put this on, just threads right on. And this is going to go on the output side of the pump. And then our other replacement part is going to be our little strainer. And this is just going to thread right on.

And all you really need to do to clean this thing out, has a little filter is take this and then we can just wash that up. So we don't really need to replace this, just clean it. And then you can thread it back on and what you're going to want to do again, thread tape for that. We'll just put this on just like that. I like to have it to where it's down at the bottom just like that.

And then this will go on the other end. And again, you do want to put some tape on there all depending on what your setup really is like the one that we put all these water pumps in the camper had some hard lines. So we actually ended up not using these, but I do suggest kind of converting your camper to the soft lines instead of the hard PVC. Just because you have a little bit more flexibility. So your pump can go a little bit more places. But if you notice this is all the pumps that we have here on our website and all of these fittings are going to fit. So some of them say that their flow max, Some of them say that they're C flow. And then the ones we're looking at today say they're hydro max. But to be honest, they're all threaded the same. They're all the exact same part. So if you are stuck in a bind and one of them is out of stock or whatever, you can just grab whichever one you see on our website. Cause they're all gonna work. It's all the same exact products, the hydro max half inch fittings right here come in a pack of two. So you just need to grab one of those for your pump. And then the strainer slash filter is going to be separate. And that just comes with one of them, but it comes with the filter and everything like that. And that'll do it for a look at the replacement parts for your hydro max water pump..