Firestone Union Tee for 1/4" Tubing

Ask the Experts about this Firestone Accessories and Parts

• Troubleshooting Firestone Air Suspension System With Leaking at Tee Fitting
  For your Air Spring Union Tee like # F3025-1 the only troubleshooting you can do is what you have already been doing. The Tee fittings simply use a compression so pushing into place is all that is required. The clean 90 degree cut is also all that is needed on the tubing. Then you use soapy water to check for leaks. The one thing that can be an issue is if the hosing is overly compressed when cutting like using a scissors for example. That is why the manufacturers make the tubing...
  view full answer...
• Option for Inflating Air Lift Air Bag Kit with Just One Valve for Both Bags
  I personally agree and think that one valve to pressurize both is ideal, but for some applications with uneven loads they give you two valves to inflate them separately. The good news is all you need is a union tee part # F3025-1 and you can use one valve for both bags.
  view full answer...
• Can Firestone Union Tee be Used in Place of a 1/8 Inch NPT Barbed Tee
  You can use union tee # F3025-1 provided you have 1/4 inch air line. Although you may be more interested in # AL21838 since it costs less. Never hurts to save a few bucks!
  view full answer...
• Union Tee to Fit Air Line of Firestone Ride-Rite Helper Springs for 2016 Chevrolet Silverado 1500
  The air tubing that's included with the Firestone Ride-Rite Helper Springs # F2430 is 1/4 inch so you'll need # F3025-1 for the correct union tee.
  view full answer...
• Pros and Cons of Running Two Inflation Valves or One in Air Bag Suspension Kit on Vehicle
  The biggest pro to using one valve stem to maintain air pressure in an air bag kit is that you always know that both bags will have an equal amount of pressure in them. If you have an application where equal pressure on both sides is always the norm then that makes things simpler. Plus you only have to drill a hole for one valve instead of two on your vehicle. The only real advantage to having two is that if you do need different pressures in either side you would be able to with that...
  view full answer...
• Union Tee Recommendation for Maintaining Same Air Pressure in Both Bags of Firestone Ride Rite
  Using a union tee like the # F3025-1 would be a great option that would be perfectly reliable to maintain the same air pressure in both of the bags of the # F2403 kit you plan to install in your 2014 Chevy Silverado.
  view full answer...
• Replacement Union Fitting Availability for Air Spring Lines
  For a union tee fitting for use with 1/4 inch air tubing you would want the part # F3025-1. If you have 1/2 inch tubing you would need part # F3158-1, for 3/8 inch tubing part # F3105-1. 1/4 inch is the most common size. There are several different styles of straight connector that you might need. I attached a link to a page that will allow you to see all of them.
  view full answer...
• Union Tee Recommendation to Allow Firestone Air Bag Kit to Only Need One Inflation Valve
  Yes, all you need is the Union Tee part # F3025-1 which will allow you to only need to use one inflation valve to air up the Firestone kit part # F4174.
  view full answer...
• Can Tee Fitting be Installed to Fill Firestone Air Bags at the Same Time on a 2018 Toyota Tacoma
  Yes, you can install a tee like part # F3025-1 so that the air bags on your Firestone Ride-Rite system (part # F2410 for 2WD or part # F2407 for 4WD) fill up at the same time for your 2018 Toyota Tacoma. It is worth noting that by going this route if you were to have more weight on one side of your pickup it could potentially cause air to transfer from one air bag to the other if they aren't at full capacity. To prevent this you can use a single function compressor kit like the Firestone...
  view full answer...
• Can Union Tee Be Used for Firestone Ride-Rite Air Springs # F2410 on 2019 Toyota Tacoma
  To install a union tee for the Firestone Ride-Rite Air Helper Springs # F2410 on your 2019 Toyota Tacoma you will need the 1/4" # F3025-1. You can certainly do this on your truck to allow you to fill up the bags at the same time. The only potential issue with a setup like this is that if you have more weight on one side of the Tacoma it might cause air to transfer from one bag to the other if they aren't at full capacity already. A really good solution to this is with a compressor system...
  view full answer...
• Is There a Way to Allow Both Firestone Coil Rite Bags to Inflate at Same Time
  Yes, if you want to use a union tee like the # F3025-1 you can easily inflate both bags of the Firestone kit part # F4175 equally with the same inflation valve. Unless for some reason you need ability to have one bag with more pressure than other this is the way to go for sure.
  view full answer...
• Can a Single Path Air Lift Compressor System be Switched to a Dual Path System
  There are actually several parts you would need to convert a single path system to a dual patch system. In addition to gauge panel # AL26229 you would need a second low pressure sensor, # AL24558, and a y-harness with check valves. You can use check valve # F9399-1 sold in quantities of 1, a union Tee such as # F3025-1, also sold in quantities of 1. And you will need some additional air line such as # F9153. You may also need connector # F3046-1. Basically if you look over the diagram...
  view full answer...
• Is T-Connector For One Fill Valve Available For Firestone Ride Rite Kit On 2014 Toyota Tundra
  The Firestone Ride-Rite Air Helper Springs, part # F2445 has two separate fittings, one for each side of the vehicle. We do offer the fitting as an individual part. It is part # F3025-1. This will allow you to use one fill valve to supply air to two lines instead of using 2 fill valves. I have attached a couple of videos that you can check out that show the installation of the Ride Rite system installed in a typical manner, and an installation video using the T-connector you can...
  view full answer...
• Air Helper Springs for 2008 Toyota Sequoia Limited
  I checked with Air Lift and their Air Lift 1000 # AL60786 are only confirmed to fit the SR5 model of the 2008 Toyota Sequoia. The Firestone Coil-Rite Air Helper Springs # F4164 will fit all models of the '08 Sequoia and will work for you. These springs fit inside your Sequoia's coil spring suspension and allows you to adjust the air pressure between 5 psi and 35 psi. Addtionally, the Firestone Union Tee # F3025-1 is available for the 1/4" hoses.
  view full answer...
• T Fitting Recommendations for Use with Firestone Ride-Rite Air Helper Springs
  Just answered your previous question and yes, you would want the Firestone Union Tee # F3025-1. Using a union T like this to equalize the pressure between the two bags is a great way to make sure that both bags have equal amounts of pressure in them. You would not have to worry about the air pressure shifting from one bag to other and having the air bags not be effective. The bags do not stretch enough for that to be a problem.
  view full answer...
• How to Release Air Line from Air Suspension Enhancement Kit Fittings
  To release air lines from fittings like the part # F3025-1 all you need to do is push in on the collar of the fitting while pulling the air line out and it will release. Since you are replacing leaky line you could certainly use old fittings as long as they too are working well. I attached a picture that shows where to push to get the line to release.
  view full answer...
• Air Bag Suspension Enhancement Recommendation for 2017 Ford F-250 that Won't Add Height
  The jounce bumper in the # AL88399 can cause a slight increase in ride height even when the bags are uninflated. There is a much better option for you since you do not want any additional height. Instead you'd want the Firestone kit part # F2600 which will not add height when uninflated and actually will give you a higher quality air bag. This would be your best solution.
  view full answer...
• Compatibility of T-Fitting for 1/4 Inch Air Lines
  The Air Lift Union T-Piece for 1/4" Air Lines # AL21838 is metal just like the Firestone # F3025-1, but it is designed to work with the plastic 1/4 inch diameter air lines like # AL22007 or # F2012. I recommend using a Tubing Cutter like # F9009 to ensure accurate cuts to prevent leaks at the fittings from crimped or crushed plastic tubing.
  view full answer...
• Union Tee Recommendation to Allow Firestone Air Bag Kit F2299 to be Inflated with One Valve
  Yes, what you are looking to do is possible. What you'd want is the Firestone Union Tee part # F3025-1 which fits the 1/4 inch air line tubing of your Firestone kit part # F2299 and will allow you to use one inflation valve to inflate both bags to the same PSI at one time.
  view full answer...
• Can a Union Tee Be Used with Firestone Ride-Rite Air Helper Springs
  You can certainly use a union tee to allow one air line to inflate both of your Firestone Ride-Rite air helper springs at the same time. Firestone offers the Union Tee for 1/4 Inch Tubing # F3025-1 to allow you to use only one air line. This fitting will work with the 1/4 inch air lines that come with the air helper springs. I have attached a review video of this part for you.
  view full answer...
• Can Firestone Ride Rite Air Bag Kit be Inflated with a Single Valve
  The Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs # F2707 comes with two air valves to independently inflate the bags but if you wanted to inflate both of them equally with one valve you'd just need to use the union tee part # F3025-1.
  view full answer...
• Diameter Of Air Line For Firestone Coil-Rite Air Helper System
  The air line that is included in the Firestone Coil-Rite Air Helper Kit, part # F4176, is 1/4 inch diameter. If you wish to purchase more air line, we do carry the air line by itself, part # F99ZR. This is a 22 foot long section of red tubing. The Tee you could use to split one line into two is the Firestone Union Tee, part # F3025-1.
  view full answer...
• Recommended Suspension Enhancements for a 2000 Toyota Tacoma TRD SR5 4 Wheel Drive
  The air spacer kit like # F2366 is a necessity and allows air springs like # F2304 to be installed on vehicles with 2-inch lift. A union T-fitting # F3025-1 will route two incoming air lines into one outgoing line or splits one incoming air line into two outgoing lines. You can use with 1/4 inch push-to-connect air lines. Adding air bags like # F2304 will help maintain even load distribution with air pressure and leveling off-center loads. Another suspension enhancement option...
  view full answer...
• T-Fitting Recommendation for Inflating Both Firestone Bags with One Air Valve
  Yes, you would want the Firestone Union Tee # F3025-1 to allow you to inflate both the bags of the Firestone Ride-Rite Air Helper Springs # F2560 with one air valve.
  view full answer...
• How to Install Firestone Kit part # F4186 and Inflate Bags with One Valve
  What you would need is a union tee like part # F3025-1 if you want to be able to inflate both of the bags of the part # F4186 with one of the included valves.
  view full answer...
• Does Firestone Air Bag Kit # F2597 fit 2014 Ford F-250 with B and W Gooseneck
  The Firestone air bag kit part # F2597 that you referenced does fit your 2014 Ford F-250 that has a B and W Turnoverball gooseneck hitch # BWGNRK1111. It does come with two fittings but if you wanted to inflate both bags to the same pressure with one fitting you'd need the union tee part # F3025-1.
  view full answer...
• Can Manual Inflation Valve be Added to Firestone Compressor Kit and Air Bag Setup
  Yes with a new inflation valve part # F3032-1 and a union tee # F3025-1 you'd easily be able to add a manual inflation valve in case your compressor setup stops working for some reason.
  view full answer...
• Available Firestone Air Bag Kit Union Tee Air Line Fitting
  Yes, we offer Union Tee # F3025-1 from Firestone which fits the 1/4-inch (outer diameter) air tubing used in their air bag suspension kits like # F2430 which fits your 2016 Chevrolet Silverado 1500.
  view full answer...
• How Much Lift to Expect from Firestone Ride-Rite Air Helper Springs on 2006 Ford F-350
  I spoke with my contact at Firestone and he said Firestone Ride-Rite Air Helper Springs, # F2400, are not designed to lift a vehicle, but to help reduce sag when under a load. If your truck is sagging without a load you might want to have your suspension inspected by a mechanic. You can connect two airlines together. To do this you will want a T fitting, the Union Tee for 1/4" Tubing # F3025-1. No drilling is required to install these helper springs. For install details and some...
  view full answer...
• Firestone Union Tee for 1/4 inch Tubing Recommendation for Filling 2 Airbags Evenly With One Valve
  The diameter hose that is used on the Firestone Coil-Rite Air Helper Springs - Rear Kit, part # F4182, is 1/4 inch. You would need a Firestone Union Tee for 1/4 inch Tubing, part # F3025-1, if you wanted to use a single valve to fill both bags evenly on your 2007 Mitsubishi Outlander. You may also be interested in a Single Inflation Valve, part # F3032-1.
  view full answer...

Do you have a question about this Accessories and Part?