Protect your Clearsource Ultra RV water filter system from scratches, UV rays, and other damage during operation. Heavy-duty protective case provides easy access to hose connectors, and the straps make transport in and out of your RV a breeze.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Clearsource WeatherGuard Protective Case for the Clearsource Ultra RV Water Filter System. Now, this is a nice heavy-duty carrying case, and this'll protect your Clearsource Water Filter System while it's in use or during transport. As we mentioned, this is designed to fit the Clearsource Ultra Filter System. We do sell that filter system separate on our website. It's part number CS87FR.
And the Ultra System is a portable three filter system for your water supply. I did happen to pull one of those just to show you what we're looks like and how it fits in here. But basically you can see there's your three filter portable water system. You have your outlets on each end here and basically the case here. This case...
You just zoom in on that. The case is a nice, tough nylon fabric. Protects against any scratches, UV rays, and other damage. And it has the durable carrying straps here that use the hook and loop fasteners. This will make your filter system really easy to transport.
The other nice thing about it is the cover on the top is held on by hook and loop fasteners. So if you open it up, here's where your filter system will go. And the other nice thing is if you look on each end, it has a cutout and that cutout will let you still connect your hoses and operate your filter with the case still on it. And I just wanna show you how it will drop right in there. And zoom back out.
And what we're gonna do is go ahead and take these portable system. Drops right in, custom fit. What you wanna do is still pop off your tabs here that have the hook and loop fasteners on them. Make sure those are facing out. And then what you do is just go ahead and close that on both ends. Close it right here, and that'll protect your filter system. Then all you have to do is put your carrying straps together with the hook and loop straps. And just like that, now you can see that you can carry your system wherever you need, and it's all protected. And as we mentioned, if you look on this end, there's your hose connection. Look on that end, there's your other hose connection. So you can still connect it and use it while it's in the case. A few specs on this. I'll give you some measurements. The overall length, from one end to the other. is gonna be right at about 20 inches long. The overall height of this, gonna be right at about 17 inches tall. And the width is gonna be right about nine inches wide. But again, we'll show you. Take it out. Just unhook your carrying straps, lift up your lid, and then just reach in on each side and you're able to lift this and remove it from the carrying case just like that. But that should do it for the review on this Clearsource WeatherGuard Protective Case for the Clearsource Ultra RV Water Filter System..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.