Curt Ball Mount for 2" ATV Hitches - 2" Ball and Clevis Bar - 1/4" Rise

Part Number: C45009

In Stock

$60.03

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt atv hitch ball mount only for 2 inch hitches - and clevis bar 1/4 rise

Show All (12) Product Images

Show Fewer Product Images

In Use/Installed

0 atv hitch curt 2 inch ball on a vehicle

0 atv hitch curt ball mount only for 2 inch hitches - and clevis bar 1/4 rise

0 atv hitch curt ball mount only 2 inch for hitches - and clevis bar 1/4 rise

0 atv hitch curt ball mount only on a vehicle

0 atv hitch curt ball mount only 2 inch on a vehicle

Show All (12) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt Ball Mount for 2" ATV Hitches - 2" Ball and Clevis Bar - 1/4" Rise customer photo

Show All (7) Customer Images

Show Fewer Customer Images

Videos

Curt Ball Mount for 2" ATV Hitches Spec Review

Curt Ball Mount for 2" ATV Hitches Review

Curt Ball Mount for 2" ATV Hitches Feature Review

Show All (3) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

Specially designed for ATVs with 2" x 2" hitch receivers, this corrosion-resistant ball mount is 6" long and features an integrated, 2" ball and a welded clevis bar to fit your varied towing needs. 1-800-940-8924 to order CURT atv hitch part number C45009 or order online at etrailer.com. Free expert support on all CURT products. Great prices and Fastest Shipping for Curt Ball Mount for 2" ATV Hitches - 2" Ball and Clevis Bar - 1/4" Rise. ATV Hitch reviews from real customers.

All Info
Reviews (158)
Q & A (0)
Related Parts
Photos

CURT ATV Hitch - C45009

Specially designed for ATVs with 2" x 2" hitch receivers, this corrosion-resistant ball mount is 6" long and features an integrated, 2" ball and a welded clevis bar to fit your varied towing needs.

Features:

Welded-on ball, 1-tang clevis, and tow strap attachment offer multiple options to fit your towing needs
- Integrated ball can be used in the rise position only
Specifically designed for ATVs with 2" square trailer hitches
Sturdy, steel construction
Corrosion-resistant, black powder coat finish
Pin and clip included - hitch lock sold separately

Specs:

Application: 2" x 2" ATV trailer hitch receivers
Capacity: not to exceed ATV tow rating
Clevis hole diameter: 5/8"
Ball size: 2"
Length: 6" from center of hitch pin hole to center of integrated ball
- Approximately 7-1/2" from center of hitch pin hole to center of clevis hole
- Measurement from center of hitch pin hole to back edge of shank: 2-1/2"
Rise: 1/4" from top of inside of hitch opening

45009 Curt ATV Ball Mount with Welded Ball, Clevis and Tongue - 2" Ball

4.9

158 reviews

5 Stars		(145)
4 Stars		(9)
3 Stars		(3)
2 Stars		(1)
1 Star		(0)

by: Simon P 12/23/2013

Having a 2 inch ball, a clevis pin and standard hole all on one ATV mount is invaluable. I've only had it one weekend so far but took care of a mountain of small jobs around the property that had been piling up. The hitch is very sturdy and well-finished. Service from ETrailer was first class but that's why I continue to buy from them.

Click to Enlarge

by: Jason C 09/09/2013

First I'd like to say how impressed I am with the level of customer service I experienced from the staff of etrailer.com. I couldn't be more pleased with the communication and turnaround time for my order. Thank you!!

As for the Curt Ball Mount I ordered. I came across this mount when searching for a multipurpose solution to fit the 2" receiver of my 2013 Can Am Commander 1000XT. The length of the hitch was a concern for my application but it fits perfect.

This unit offers a welded-on 2" ball, 1-tang clevis and tow strap attachment. What else do you need? And I wouldn't hesitate to order from etrailer.com in the future. Thanks again!

Click to Enlarge

by: Wesley 03/21/2026

Perfect, just what I needed, fast shipping!

by: Bobby 12/18/2018 One Year Later

This has worked out for pulling a spreader around and then just flip it over and I can move around standard trailers with 2" couplers. I have left it on the ATV in the weather for the last year and it has held up good.

Click to Enlarge

by: Richard 07/11/2026

Works great

by: Clement 10/30/2017

Great service order came sooner than expected.Hitch and extension bar worked perfectly.

Click to Enlarge

by: Larry C. 06/06/2017

This product was exactly what I needed for my side by side. It is a 3 way hitch that will work well on my Kawasaki Mule.

Click to Enlarge

by: Brandon 08/26/2023 One Year Later

Hitch worked as expected for my Kubota X900 UTV. Did need to buy an extender adapter to move the hitch further away from the machine. It's a useful hitch though as it allows pulling both balled or pinned trailers. Included a picture but it wouldn't upload.

Brandon One Year Later

8/27/2024

Still working great after a year. Able to withstand the bumps, bruises, and general rough life of a hitch.

by: Troy 08/03/2020

Installed on my side X side so I can have a hitch ball to connect trailer and a place to attach tie down straps. It looks good and works well.

Troy One Year Later

8/7/2021

Fitted UTV good and works as advertised

by: Leonard 11/02/2017 One Year Later

I use the trailer ball on my UTV. I rides high enough to have good ground clearance and the 3 connections are a plus. I have a trailer I connect with the 2" ball, a lawn cart with the hole for a pin, and the straight pin is great for securing ratchet straps when I haul my side by side on the trailer. Very strong and versatile product.

by: Steve H. 10/12/2016

Product was as described on their web page and it fit perfectly. I am using it on a John Deere gator and use it to move a trailer around my property and also handles the yard implements without having to switch hitches like in the past. This one hitch handles what use to take three hitches to do. Perfect height for my gator and no worries when making sharp turns that the trailer will not clear.

by: Clint 08/24/2015

Great product!!!! Looks good, great welds, works great and well thought out as for as design and function!

I had previously bought atv receiver insert from another company and returned it due to Clevis pin was on same side as 2" ball taking away approach and departure angles because trailer would hit clevis pin section.

On the c45009 it put Clevis pin section lower for better approach/departure angles and has multi function points

by: Todd 05/21/2019

Very well built

Click to Enlarge

by: Jeremy D 10/17/2016

I absolutely love the convenience of this hitch on my quad. I use my 6'x12' utility trailer (2" ball) to haul brush. I move the boat/trailer around. I pin on the smaller lawn mower trailer for various uses in our woods/trails. I hook up the chain to drag logs or drag our gravel driveway. It's a terrific hitch.

by: Orion 06/28/2017 One Year Later

Great addition to my ATV. Great for tie down point for hauling, for hooking up to trailers and pulling others out of the mud with straps.

by: Steve S. 09/06/2017

Exactly as described and shown in the photo. The bar feature is great for connecting a tow strap to drag things. My stock UTV had no safe place to connect a tow strap. This hitch solves that problem.

by: Scott 11/19/2025

Looking good on my Ridge

by: Ron D 08/29/2013

Great Hitch! very versatile Just remember to order the size ball you need as they are welded to the hitch!
Also The packaging was great! best packaging I've ever seen ! Good job etrailer! couldnt be happier !

by: Eugene C. 07/14/2014

I received the ball mount in the proper time. I found it to be solidly constructed and fit my vehicle perfectly. I checked all three uses of this mount to insure it met my needs, and it did. Thank you, etailer for the easy shopping, great selection, excellent product quality and a satisfactory price.

by: Kenneth 04/07/2021 One Year Later

Great dual function hitch .Used once last mowing season, when I got lawn mower stuck.

Kenneth M. One Year Later

4/8/2022

I am using to pull a small trailer off of my truck. I like ,because it is shorter than others. I leave it on and my garage door closes better

by: Scott M. 10/18/2014

Purchases this also when ordering the 1-7/8 hitch for a different trailer,

both of these hitches surpassed my expectations. Will order from here in the future.

by: Butch L. 04/19/2016 One Year Later

Terrific product. The ball mount, pin hole, and rope/chain anchor point makes it a lifesaver in all different situations you may find yourself in. Never comes off my vehicle.

by: Jess 05/19/2020

Replaced a multi-ball hitch on my Ranger. This will be of better use as I only have 2" books on my trailers but have attachments that use the clevis.

by: Tommy D. 10/24/2011

ball mount for trailering and a perfect place for my tie downs. Construction appears to be solid as well.

by: Ben F. 09/16/2013

This is a very useful product if you own an ATV or side x side and use them for towing implements with different style hookups. Saves time because you don't have to change hitches.

158

true

Show More Reviews

See what our Experts say about this CURT ATV Hitch

Do you have a question about this ATV Hitch?

Recommended Ball Mount With Clevis For ATV Towing
A hitch ball will give you better control for backing up your travel trailer with your ATV. I recommend the Curt Ball Mount for 2" ATV Hitches - 2" Ball and Clevis Bar - 1/4" Rise # C45009. This will give you the clevis as well as a 2 inch ball for your application. If you need the entire system, I recommend the Curt ATV Towing Starter Kit - 2" Receiver - 6" Long Ball Mount - 2" Hitch Ball # C45038.
view full answer...
Does Curt ATV Ball Mount C45009 Have a Towing Weight or Class Rating
The Curt ATV Ball Mount # C45009 does not have a specific towing weight rating, nor a class rating, because its capacity will exceed that of virtually any ATV and ATV hitch. The Polaris Rangers vary in their towing capacity depending on the specific model. The XP900 is indeed rated for 2000-lbs, but the model 570 is rated for 1500-lbs and the XP1000 is rated for 2500-lbs. This ball mount is fine for use with any of these since it will have a higher capacity than the hitch and the ATV itself.
view full answer...
Ball Mount Recommendation for a Polaris Ranger UTV with 2 inch Hitch
For a UTV a lot of guys like the part # C45009 which has a 2 inch ball and a clevis bar or the part # C45005 which has a 1-7/8 inch ball and the clevis bar. Both of these have a 1/4 inch rise.
view full answer...
Distance from Clevis hole to End of Ball Mount on Curt ATV Ball Mount
I've attached a diagram to show some other helpful measurements for the Curt Ball Mount for 2" ATV Hitches # C45009 . The measurement from the center of the clevis hole to the end of the hitch is approximately 10"; it is approximately 7-1/2" from the center of the clevis hole to the center of the hitch pin and approximately 2-1/2" from the center of the hitch pin to the end of the ball mount. It is also 6" from the center of the hitch pin to the center of the ball mount.
view full answer...
Clevis Hole to Strap Post Measurement on Curt ATV Ball Mount # C45009
I went out to the warehouse and pulled Curt ATV Ball Mount, # C45009. From the end of the Clevis hole to the strap post there is 1-1/8 inches of space. I took a few other measurements which I have included in a picture.
view full answer...
Dimensions of Curt Ball Mount for ATV Hitches 45009
For the Curt Ball Mount for 2" ATV Hitches - 2" Ball and Clevis Bar - 1/4" Rise # C45009 I've attached a video that assists with the dimensions. It will be 6 inches from the center of the hitch pin hole to the center of the ball. It is 2-1/2 from that hole to the back of the shank. From the weld to the center of the hitch pin hole is 3-1/4 inches so from that point to the back of the shank is 5-3/4 inches.
view full answer...
Compatibility of Curt # C45009 ATV Ball Mount With 2015 Can Am Max 2-Up 650
The Curt # C45009 ball mount with 2 inch ball and clevis is not a vehicle specific item. If your 2015 Can Am Max 2-Up 650 has a 2 inch receiver hitch on it, the ball mount will work great for you.
view full answer...
What is the Distance From the Center of the Hitch Pin Hole to the Weld of the Platform, # C45009
On the CURT 2 Inch Ball and Clevis Bar Ball Mount, # C45009, the distance from the center of the hitch pin hole to the weld where the fork is attached is approximately 3-1/2 inches. It may very between mounts because the weld may be larger or smaller between units.
view full answer...
Recommended Ball Mount with 2 Inch Rise and 2 Inch Ball for ATV Hitch
The Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs # C45270 is a longer ball mount with a 2 inch rise that will work well. The 2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs # 40038 would also be a great fit. You won't get the clevis bar with this option but it is the only upgrade from the # C45009.
view full answer...
What Diameter Hitch Pin Does Curt ATV Ball Mount Come With
The Curt ATV Ball Mount # C45009 that you referenced does come with a 5/8 inch diameter hitch pin.
view full answer...
Ball Mount with Clevis Attachment for a 2006 MPT 1200 G
If your MPT has a 2 inch trailer hitch opening then you might like the Convert-A-Ball multi-hitch ball mount # CAB-6W which has all 3 common ball sizes and the ability to accept a lunette ring, spade or clevis. This ball mount has you covered with all of those options. I have also included a link to the ATV multi-functions mounts that we have. All of them fit 2 inch trailer hitch receivers. If you have a different size let me know.
view full answer...

Do you have a question about this ATV Hitch?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

Adam R

Written by:

Lindsey S

Video Edited:

Joshua S

Video Edited:

Dustin K

Updated by:

Adele M

Updated by:

Wilson B

Updated by:

Kristina F

Updated by:

Isabelle B

Installed by:

Cole B

Installed by:

Brent H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.