To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
The Super 5th is made for heavy-duty towing with a 16,000-lb gross towing weight rating and a 4,000-lb vertical load limit. That kind of strength gives you confidence pulling large 5th-wheel trailers or toy haulers across long stretches of highway. Its solid steel construction, tested to SAE J2638 standards, delivers the toughness and stability needed for consistent towing performance trip after trip.
Hooking up doesn’t get much simpler. The self-locking hitch plate and automatically latching jaw close around the king pin as soon as it’s in place. Once locked, the handle secures itself so you know you’re ready to tow without extra steps or tools. It’s quick, straightforward, and cuts down on the time spent double-checking connections before you hit the road.
A tight connection makes all the difference when towing long distances. The precisely laser-cut, wraparound jaw holds the king pin snug to reduce rattle and movement that can cause chucking between truck and trailer. The dual-articulating head pivots both front-to-back and side-to-side for smoother transitions over bumps and uneven ground, creating a ride that feels calm and composed from start to stop.
Getting your trailer level and your bed rail clearance right is simple with the three available height settings between 16" and 19". This built-in flexibility helps you dial in a balanced setup that keeps weight distribution even and towing geometry correct. Once adjusted, the hitch stays solidly planted on its industry-standard above-bed rails for dependable alignment every time.
When you’re not towing, clearing your truck bed is easier thanks to the modular design. The base weighs 85 lbs while the removable hitch plate comes in at 25 lbs, so you can separate them for lifting without special equipment. That makes stowing or reinstalling the Super 5th manageable whenever you switch between tow duty and everyday hauling.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the PullRite custom installation kit with the base rails for your fifth wheel trailer hitches. And this has a 16,000 pound gross towing weight capacity. Now this is a custom fit part. It is designed to fit the 2016 and newer Ram 1500 trucks with the six and a half foot bed.
And on a custom fit part like this, I do like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle, and it'll show you if this will work for your application. Now this installation kit will let you mount your fifth wheel trailer hitch in the bed of your truck. The mounting brackets, which I've attached to the rails, these will install beneath your truck bed. And they provide the attachment points for the above bed base rails. The base rails right here, these will provide the necessary mounting points for your fifth wheel hitch to mount into.
Now the mounting brackets on the side here, these are custom fit mounting brackets. They mount to existing holes in your vehicle frame. So that'll help minimize drilling and measuring, reduces the installation time and it'll also avoid known obstacles along your truck's frame. One thing I do wanna mention is the best feature on these PullRite brackets are the built-in tabs that are just below the slotted bolt hole. Basically these tabs eliminate one of your biggest problems you'll run into when you install mounting brackets to your vehicle.
Basically this is how to keep those nuts in place when you're installing the bolts of the mounting brackets through here. And I did wanna zoom in just so we can show you a little bit closer to what we're talking about. If I turn this over, you can see where the bolt comes through. So basically if you notice, here's the mounting bracket. So this mounting bracket has this extra tab that's put in there and you see that tab, it is bendable.
So basically what you can do is you can bend this tab down, slide your nut in there, bend your tab back, and then when your bolt comes through. It'll go right into there and you can tighten it down and that tab will hold it in place. So that's a nice feature they thought about because lots of times when you're installing these on vehicles, there's not a lot of room or area to access that to be able to hold those nuts in place. Again, I'll pop up an insert just to show you what we're talking about. There's that underside again, you can see how the nut slides into that opening and that bracket will hold it in place when you put your bolt through. Now this kit is compatible with B&W Patriot, CURT, Demco, Draw-Tite, Hidden Hitch Husky, PullRite and Reese above bed fifth wheel hitches. The finish on these parts, that's nice black powder coated steel, makes it corrosion resistant. And it does include everything shown here, the two base rails, the custom mounting brackets, all the hardware you need for installation, and a real nice set of detailed instructions for installing it. These parts are made in the USA and as we've mentioned, the gross towing weight capacity on this kit is 16,000 pounds. But that's gonna do it for a look at the PullRite custom installation kit with base rails for your fifth wheel trailer hitch.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.