Do Both SuperSprings SuperSway Stops Need to be Used for Kit to Function
Updated 11/13/2025 | Published 10/24/2025
Question:
i purchased supersprings for my 2012 F350 Crewcab 4x4 DRW. without the springs installed and just airbags, only the rear stock overload bump is touching the rear area overload spring on the left and right side of truck. the stock front overload bump is well over an inch above the front of the overload spring area on both the left and right side. is this normal? is the spring supposed to work with both the front and rear stops engaging the overload spring at once. I like the fact that the supersprings thickness can be adjusted for this reason. if both the front and rear should be engaging, it appears i can make the front superspring thicker than the rear in an effort for dual engagement. sorry no pictures, but there wre pics on the FAQs where a gentleman showed exactly what I am experiencing. thoughts on this?
asked by: Thomas B
Expert Reply:
Hey Thomas, with the SumoSpring part # SS65GR you do want to have the front and rear installed on the springs even though only the rear seems to be making contact as is. You want uniform pressure on the front and back otherwise it will just flex further on the side that doesn't have the spring installed if that makes sense. I would also recommend running the same height out of both of them.
Product Page this Question was Asked From
SuperSprings SuperSway Stops - Qty 4
- Vehicle Suspension
- Towing/Load Leveling
- Pads
- Suspension Only
- Rear Axle Suspension Enhancement
- SuperSprings Intl
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Roadmaster Rear Anti-Sway Bar - 1-3/8" Diameter
- Shop: Suspension Enhancement
- Search Results: storage box
- Video: All About the DeeZee Specialty Series Underbody Tool Box
- Q&A: Can I Use Both the TorkLift StableLoad and the SuperSprings Super Sway Stops for Hauling Camper?
- Q&A: Which Torklift Camper Tie Downs Fit 2024 Ford F-350 Short Bed Tremor
- Q&A: Suspension Enhancement Recommendation for 2019 Ford F-350 Dually with Lance Camper and Bike Rack
- Q&A: Truck Bed Camper Tie Downs For A 2025 Ford F350 With 6-3/4 Foot Bed
- Q&A: Is There Weight Capacity for Brophy Camper Tie Downs
- Q&A: Will Hellwig Adjustable Big Wig Rear Anti-Sway Bar Fit 2024 Ford F-350 4X4
- Q&A: Choosing Between Timbren SES and RoadActive Kit for 2022 Silverado 2500 Towing 5th wheel
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: How to Mount a Truck Bed Camper
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Stability Control for Heavy Duty Vehicles
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: The Best 5th Wheel Hitches
- Article: Is It Illegal to Leave My Hitch on My Truck?
Jameson C.
11/13/2025
Hey Thomas, how did things go after you set up the SumoSprings on both the front and rear of your F350? Did running them at the same height give you the even pressure you were aiming for? Your update could make it easier for others working on a similar setup.